Meeting room PIN in the dial string

Similar Questions

• Modify the dial string

  When we ask a number associated with the application of the composition of BB, is it possible for us to add / change a prefix or a postfix of the Dial as application string smart dial of the BB?

  Or by any mode of change / externd the logic of composition of smart dial BB?

  Laughing out loud

  You can intercept the call (using the injection of the event etc.) and create a new call to the desired value.

• Problem with the Polycom endpoint dial string via VCS

  Greetings,

  Currently I have an environment using a set of standalone Polycom endpoints (mixture of VSX/HDX units).  We have recently installed VCS - c / VCS-e / TMS and despite a few problems with the SIP registration on some of the older endpoints and management through TMS, all support works well.  The only remaining problem is when there are a number of business partners using the extensions in their chains of H.323 dialing that works very well for the Polycoms during the use not VCS - c as a guard in the numbering of the format #.  When you use this same dial string and endpoints are registered in VCS - c then the only thing it is indicated in the call history is a number of , which fails.

  I am aware that different manufacturers have historically managed extension dialing differently since ISDN only and has apparently been perpetuated until today.  However, it's a pretty critical need still at this stage and I am looking for input on chipboard VCS supports the use of extension component in the dial string (or did once the call is connected to a gateway is the host).  If so, is there a specific format for this connection string which can support both the end points of Polycom and VCS able to interpret correctly?  Does anyone have this working?

  Latest versions of software are on all components.

  Thank you in advance for any thoughts you may have!

  Hi Readamson,

  using the syntax of "device-IP-address ##extension" to compose a H323 device isn't a way standard of doing things, it is approach of Polycom extension numbering that VCS does not understand without changing the alias of a '[email protected] / * /' format.

  Assuming that the address-IP-receives the message SETUP H225 VCS-E, he does the SETUP message? Is there a way that you can configure this device to end to remove the [email protected]/ * /' part of the route the call to the post and the dialed number?

  Visit this link:

  https://supportforums.Cisco.com/thread/2129307

  Best regards, Ahmad

• MSE 8510 clustering and maintenance of static meeting rooms

  I have 2 8510 blades with static meeting on each 100 rooms.

  These rooms have e164 numbers that I delivered to users for their meeting rooms.

  We are short of capacity, and we'll be adding another 8510 blade.

  I would like to group all 8510 3 blades.

  However, I don't want to have to manually recreate the 200 meeting rooms.

  My plan would be to make 1 blades with 100 primary rooms, leaving 100 rooms that I'm going to lose.

  I'll do a transformation on the VCS - C to replace the prefix of the blade from the slave to the prefix of the key blade.

  I will then try to 100 permanent rooms via putty with the script API...

  Someone at - it never do or have a preview?

  Here's what I'd do:

  1. Make a backup of both 8510 blades via the settings > upgrade > backups
  2. The two blades of the cluster
  3. Backup the configuration of the blades newly clustered
  4. Open all the backup files in an XML editor
  5. Determine the portion of text in old files that specify all your meeting rooms
  6. Paste the text room sitting in the cluster backup and save it
  7. Restore the backup of the cluster updated the

  I did something similar with 8710 blades, back in the day where you had to manually had to define every endpoint CTS. I got points of termination 50 + I had to add to three groups, so I used the method above, except that I stuck the CTS endpoint text, and not the meeting room information.

  Just be very careful to make sure that you paste text right in the right place.

• Number keeps appearing in the Dialer phone

  Hello

  I have an iPhone 6 installed 9.3.1

  I have a contact that I added maybe 6 or 7 months ago and asked only once.

  Now when I open the phone application... and goto the Dialer/keyboard number and the name of the contact appear then disappear very quickly.

  This product at random... sometimes theres nothing out there and sometimes it appears and disappears. (but its always the same contact.)

  Someone had the same problem and how get rid of?

  Thank you

  Remove this contact - then

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

• Virtual meeting room

  Hi all

  I would like to learn more about VMR and couldn't find any docs. If you guide me to the doc describing in more detail, I would be very much appreciated.

  Thank you

  Alex

  A virtual meeting room is often used a name for static or generated ad hoc Conference on a microcontroller.

  may be added with routines on how to use it in your organization. If its not a sort of Cisco product.

• Cannot connect as the host of the meeting. I'm the account administrator.

  Hello

  First day using the software. I can not connect to host for a new encounter, I created even though I am the administrator account, I created the meeting and I am defined as a host in users of the meeting.

  I use chrome and I checked in the program flash. I do not have the most recent flash which is built into chrome. I also tried to connect with internet Explorer. Same question.

  I connect to the meeting. do not ask me to download the Adobe Acrobat Connect Pro component software plug-in, but I see a small message for 1 second that looks like it says download adobe connect (maybe?) before the actual junction bar rises. So I'm stuck at the meeting as a participant, and I can't change my user type.

  It is a new account. Could not be activated again with her? I didn't even get my password for the account again of my representative sales, but just click I forgot my password and the system I would like to reset so I can get to the faster (haha). Everything else seems to work. So help please!

  Also, I can't create a password to login to the meeting? That isn't supposed to be an option in the meeting menu creation?

  Thank you
  William

  You are probably using the model named host of license. Therefore, you have to be a member of the Group hosted the meeting to host a meeting.

  Exact verbiage for the named host license:

  Named host can create an unlimited number of meeting rooms, however, the named host can only use one of their rooms at any time and rooms are not accessible, unless the named host is present.

  As an administrator, you can create rooms, but you can not host.

• Meeting room facility

  My first question is just a very general question about how everyone organizes the folder structure for meetings in their organization.  From what I can tell there are only two possible places to put the meetings, shared meetings or meetings of users.  If someone is given the host of the meeting group they automatically have a folder created for them in meetings of the user with their login.  It seems fine if you really want everyone to be a host of the meeting, but for our Organization (we always get to know Adobe Connect) for the time being, we would like to create a meeting for a user, and then assign them to the meeting as the host.  Where would you put these meetings?  Here's what I thought of as options

  1. Put the individual meetings in the shared meetings folder (no harm, did open the permissions on them somehow)
     
  2. Create individual folders in t he users meetings (or temporarily assign a user to the Group host the meeting) and create the meeting it
     

  No matter what other options or the pros and cons you can think that makes one of these options to stand out?

  The second question was very basic, but what is he really a time for the meeting?  For our users, they tend to have a single room and then reuse it several times.  With this configuration with a start time and duration is not logical...  Expects to what you actually create a new meeting whenever you want to have a meeting?  Is the idea that they create a pattern such as 'Adobe Connect Introduction' and then every week they would create a new "Adobe Connect - Introduction Date" meeting room of this model?

  Thanks for any comments or questions!

  Carpet
  

  OK, there are a few things that need to be mentioned here.

  First, let's address the composition of your meeting host group.

  Depending on your license, you may, or may not be a limitation on this group. If you have purchased the organizing model of named licens, you will only be able to put the number of people you have licenses for this group (take 5 for example). Those five will be able to create and host meetings and must be present in a meeting room to make it work. You can assign the rights meeting host to someone else, so they can have that roll into the Live meeting, but the meeting host group member must be present in the room to make it work.

  If you bought the participating competitor license model, then you can put as many people in the meeting host group you want or need, and the limitation is how many people you can have at the same time giving meetings at any time. With this licensing model, you can create a room, rights re-branded to an individual host and run the House on their own.

  For folders, the difference between the records of meetings of the user and the shared meetings folder is a management issue. Access and the function of the room is unchanged by where it resides on the server. What is affected, it is who has access to the functions server side of this meeting room. So if several people must have access to the room (let use you it for the weekley staff meetings) and there is a variety of people who can host the room, then he must live in the folder shared (preferably in a subfolder for organization) meetings where all the people who may need to access settings behind the scenes access. Who is?

  Now, to your questions:

  1. simply place a meeting in their folder is not giving them access to the management of it. They must be assigned as the host of the room as well.

  2. assuming that your license allows, I would like to just creat the meeting in a folder in the shared meetings folder. You can create a structure of folders there to keep track of things in an organized way. However, if you place them in the group, host of the meeting, so that they can use the license for this session, it is perhaps better to put it in their folder and assign the host rights. Then if they need in future access to this room, you just add at the meeting of the host group, and the House would become available to them.

  The option of Date/time to a meeting room allows you to organize a meeting in your room using the internal calendar to the Acrobat Connect Pro application. Is not integrated with any external calendar system. It also has nothing to do with a creation of / deletion of / or access to the room. So in short, it does nothing, please ignore it.

  The meeting room is persistent, which means that, when they are created, they may be available for you 24/7/365. This simplifies your workflow to use a room again and again, because he keeps a static URL and all your content can live in your room, just waiting for you to access. You should not use the meeting for all meetings Planner. I use Outlook and create a meeting request (with a recurrence if necessary) and just include the URL of my room, it's all my participants will need.

  Models for meetings is there so if you need to create multiple rooms, you can have a predefined arrangement of pods and layouts in the room that you like. In this way, when you create new rooms, you don't have to spend a bunch of time makes it look and function as you wish.

  Let me know if I missed something.

  Jorma

• Is it possible to copy my meeting room layout?

  I created several meeting room "layouts" my day of the meeting and I would like to put these provisions into other meetings I've already built.  Is this possible?

  Unfortunately not, the only way that you could do would be to remove your current meeting room and then re-create the model.  Hope that answers your question.

• Failed to run backup using the format string

  Hi all
  
  Need help with RMAN, my problem as below:
  
  RMAN > run {}
  2 > level 1 incremental backup cumulative
  3 > format "D:\ora\rmanbackup\RCKLGC_INC < % s: T: %p % _ > .dbf.
  4 > tag data base 'DAILY_DATAFILES ';
  {5 >}
  
  From backup 29 June 09
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 145 type device = DISK
  channel ORA_DISK_1: starting from compressed data file backup set incremental level 1
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  Enter a file 00005 name = E:\ORA\ORADATA\RCKLGC\MGMT = datafile number. DBF
  Enter a file name 00002 = E:\ORA\ORADATA\RCKLGC\UNDOTBS01 = datafile number. DBF
  Enter a file name 00006 = E:\ORA\ORADATA\RCKLGC\MGMT_ECM_DEPOT1 = datafile number. DBF
  Enter a number of file datafile = 00001 name = E:\ORA\ORADATA\RCKLGC\SYSTEM01. DBF
  Enter a number of file datafile = 00003 name = E:\ORA\ORADATA\RCKLGC\SYSAUX01. DBF
  Enter a file name 00007 = E:\ORA\ORADATA\RCKLGC\DATAFILE\O1_MF_RMAN_DAT_4M9QWZT5_ = datafile number. DBF
  Enter a number of file datafile = 00004 name = E:\ORA\ORADATA\RCKLGC\USERS01. DBF
  channel ORA_DISK_1: starting piece 1 to 29 June 09
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 2009-06-29 18:20:49
  ORA-19504: cannot create the file '< _1097:20090629:1 > D:\ORA\RMANBACKUP\RCKLGC_INC. DBF. "
  ORA-27040: create file error, cannot create the file
  04002 - OSD: could not open the file
  S/O-error: (123 OS) the file name, directory name or volume label syntax is incorrect.
  
  ----------------------------------------
  
  If I set the format by default %U work string. Can someone help me? The sting of format I used on the database under Linux works fine without any problems.

  Hi faisal.badrom,
  Can you be more specific on the 'format string to meet backup requirement standards "?
  Are you allowed to jump ">".< :"="">
  If you can use:

  format 'D:\ora\rmanbackup\RCKLGC_INC_%s_%T_%p.dbf '.

  Or to extend it again with the name of the database:

  format 'D:\ora\rmanbackup\RCKLGC_INC_%s_%T_%p_%d.dbf '.

  to meet the standard?

  Kind regards

  Tycho

  Edited by: tychos on June 30, 2009 01:33

• Having all the icons app pinned to the docking station

  It affect the performance or memory available to other programs if you pin all the application icons in your dock (just for the look)?

  I'm not sure about the memory, but keeping all applications in the dock reduces the execution stack, so it is wise to keep apps in launchpad (you can keep finder and trash in the dock) and also to reduce the size of the icons.

  Thank you!

• How to display the number of steps on the dial of the watch

  I so enjoyed my Fitbit wanted an Apple Watch, but may not know how to get the steps, heart rate, etc., on the dial of the watch so I don't have tro go in applications every time.  Any thoughts?

  Thank you very much!  I think I can do this :)

  Really useful.

  Jan

• The Web sites I've pinned to the taskbar are missing, now what?

  I can't find my icons for different websites I've pinned to the taskbar, like facebook.

  If the problem is with the personal bar of Firefox, which usually appears under the main navigation bar, see this article: Bookmarks Toolbar - view your Web Favorites at the top of the Firefox window.

• How to rename the bookmarks pinned to the taskbar?

  Firefox 18.0

  I have a few bookmarks pinned to the taskbar. They show the URL of the link, not the name of the bookmark. For example; in my menu bookmarks, I have a bookmark named "hotmail", but when I pin in the Firefox icon in the taskbar, it appears as https://login.live.com.

  How to rename or get it to show the same name as the menu drop-down?

  Step 1: Create a bookmark to the URL in firefox with the name you want.
  Step 2: Drag the bookmark on the desktop (it can create it with the IE icon)
  Step 3: Drag the icon to the icon of firefox pinned in the taskbar. This should pin the URL in firefox with the name. It will be useful.

• How to get rid of pinning on the new tab

  Okay, so, I was just curious as to how I can get rid of this new site pinning thing when I open a new tab. I don't want my most visited sites or any site besides projected. Please if someone can help me to get it back as it was, it would be great, and if not, just tell me how not to have my most visited car pinned. I thank very you much for your time. I hope you have a nice day!

  You can add & custom pin of the sites on the new tab page by drag-and - drop them to your bookmarks or history.

  However if you don't always like it, you can hide the feature by clicking on the icon toggle on the top right of the site, or disable it completely: enter "on: config" in the address bar, confirm the information dialog box, double-click the preference of 'browser.newtab.url' and its new value "on: vacuum.