Memory card not seen by Windows XP computer using the USB card reader portable

Similar Questions

• External hard drive does not work on windows 7 after using the external hard drive on a mac (osx 10.7)

  title says it all. It does not open on autoplay and does not anywhere, but is always works on mac

  http://www.Mediafour.com/products/MacDrive

  If you want to use the drive to read and save files on both mac & PC I think that you will need create separate partitions on the disk, a formatted for mac and one for the PC.

  The utility linked above only allows access to a mac formatted drive and access the data, having never had to use it I don't know if it allows you to save files PC to the mac player

• My keyboard is not recognized by windows when connected to the USB ports.

  My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.

  Original title: keyboard problem

  Hi Caragata,

  Perform the steps from the link below and see if it works.

  Tips for solving problems of USB devices

  Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.

  Good day!

• "Update info" link does not work in Windows 8 by using the Microsoft account

  I have Windows 8 Pro. I had signed with my Microsoft account.

  Recently, I ran into problems of synchronization and so had to sign out and sign in my account from Microsoft on my PC in Windows 8.
  I have 2 steps check activate my Microsoft account and authenticate using the authenticator application for Windows Phone 8.
  I signed on the Microsoft account on my PC after switching to a local account and on the Microsoft account. I used normal password (not the app since it does not accept it). Successfully signed in, she says that the parameters can not be synchronized until I've "update info" in my Microsoft account. I know it asks me the passcode generated by the application, but the link is dead. Here is the screenshot of the link.
  
  How can I make it work?
  Reset my PC isn't an option. I can't afford to lose everything I have in there. In addition, a system at this stage image backup is useless for obvious reasons.

  Hi Ram,

  As the link update security information is dead, you can connect to the Microsoft account directly and update security information.
  Here is the link: https://account.live.com/summarypage.aspx

  Why should I verify my email address?
  http://Windows.Microsoft.com/en-us/Windows-Live/account-verify-ID-email-address
  Security information for the Microsoft account: FAQ
  http://Windows.Microsoft.com/en-in/Windows-Live/account-security-password-information

  Let us know if that helps.  If the problem persists, please answer, we will be happy to help you.

• Dell Dimension 8100 running Windows XP and using the USB Netgear adapter that falls frequently.

  I am running Windows XP on an old Dell 8100 and connect to my router with a Netgear N600 Wireless Dual Band USB adapter. The adapter stops frequently. Is there some settings in Windows XP, which is the cause? The adapter turns off intermittently for no apparent reason and without error message (other than the message that the internet connection is off).

  Hello

  The "DRIVER_IRQL_NOT_LESS_OR_EQUAL" error if there is a corruption on the hard disk. I suggest that you run a Chkdsk command.

  Follow these steps:

  1. Click Start.
  2. Choose run.
  3. In the box type "cmd" and press, Ok.
  4. Type chkdsk/r (note: there is a space after chkdsk)
  5. Restart the computer and allow to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Unable to transfer photos from phone to the computer using the USB cable

  I went to Radio Shack, showed them my cell phone and asked what USB cable would transfer my photos from the phone to the laptop. What do I need to achieve this. I bought the USB said would work but I connected my phone to laptop and nothing happens even if I was told that he'd tell me what to do. Help!

  Hello Sheryl,

  Thanks for your reply.

  I understand that need makes feel you upset and we will try to fix this problem for you.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  • Do you get error codes/messages when you try to transfer pictures from the phone to the computer?

  • What is the brand and model of your mobile phone number?

  I suggest try to connect the phone to a different USB port and check.

  You can also try to connect the phone to another computer and check if that helps.

  Answer us with the results above steps help you to solve the problem.

  You can also view the article below

  Import pictures and videos from a camera, phone or DVD

  http://Windows.Microsoft.com/en-us/Windows-8/import-photos-videos

  Get back to us with the results. We would be happy to help you further.

  Thank you

• Transfer photos and contact information for the razr of motorola (V3) to my computer using the usb connection

  I need instructions step by step to transfer my info and contacts, photo, and waiting for a cell phone motorola razr V3 I dropped and now the screen is white. I am on an acer inspire laptop which uses windows 7.

  I need instructions step by step to transfer my info and contacts, photo, and waiting for a cell phone motorola razr V3 I dropped and now the screen is white. I am on an acer inspire laptop which uses windows 7.

  Hi Trey

  If the phone is damaged, it is something you will need to contact the Motorola Support for the information you are looking for. Here is the link.  Motorola support
  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• A satellite - DVD Drive not seen by Windows Explorer

  The DVD on D deive is not seen by windows Explorer. Used to work, it has now disappeared. The dvd hardwars starts at the start, then stop.

  Any ideas anyone?

  Hello

  You see the DVD drive in Device Manager and you then yellow exclamation points?
  Maybe you should just remove the drive from Device Manager and reboot the laptop. Select the drive in the Device Manager, right-click on it and choose uninstall. Then, restart the laptop.

  If it doesn't work try the workaround posted by Akuma to remove upper and lower filters.

  Good bye

• Media card internal drive not seen by Windows 7 Pro 64

  The return of the story is this: my Dell Inspiron 546 recently dropped when the HARD drive failed terminally.  "Rather than replace the HD, I opted for the upgrade of ' with a refurbished desktop computer.  I'm done with a Dell Optiplex 760 MT, which I am very happy with.  He has a new 128 GB SSD mounted and I have a new 1 to Seagate Barracuda disk HARD ready to go in it, when I get a longer SATA data cable for it.

  In any case, I got a few pieces off the Inspiron to go in the Optiplex: memory card reader 2-4 GB of RAM, DVD - RW and media 3.5 "internal.  The RAM of works well (taking the system to a total of 6 GB).  The DVD - RW works fine (once I activated the SATA port in the BIOS).  However, the card reader does nothing.

  I plugged into a vacant USB connector on the motherboard, which has been marked something like "INT USB".  However, Windows doesn't see it, and it does not show in the Device Manager.  It's as if she is not there at all (no lights, nothing).

  This card reader worked fine on the Inspiron (which was an AMD Athlon 64 machine, but running Windows 7 it 32 b).

  Any ideas?  I had a glance through the BIOS and can't see anything obvious.  I assumed that being a USB device, it would just spring to life, but I do not.

  The fixed.

  First, to use the USB header, you should disable the "floppy" in the BIOS.  I tried this but it didn't work.  However, the service manual indicates before installing the drive, then I unplugged the drive, put under tension, then stopped again, plugged in and restarted, you must disable the floppy.  I also disconnected and re connected the cable at the end of the drive.

  According to these fixed it, I don't know, but now it's the hunky dory, seen in the maps of Manager and reading of the device as it should.

• Windows thinks flash drive memory card reader - will not let me import the photos.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  ====================================
  Just guess... could this be a hardware problem?

  If you have more than one port... try USB to another.

  Maybe you can connect the camera to your laptop via
  USB cable and see if you can download your photos.

  Maybe the following article offers some ideas:

  (310575) advanced troubleshooting tips for
  General problems of USB in Windows XP
  http://support.Microsoft.com/?kbid=310575

  Good luck finding the solution.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows XP prevents me from installing the new hardware as my Canon camera and memory card reader.

  original title: problem with new hardware

  last week, windows xp prevented me from installing new hardware, namely a canon digital camera and a memory card reader. Although the system recognizes the material into the machine, when you are looking for auto install it asks me for the service pack 3 cd, which I did not. I never had problems, install new hardware before. Any ideas why this happens?

  Hello

  · What is the service pack installed on the computer?

  · What is the model number of the canon camera?

  · What is the exact error message that you receive with error code if any?

  If you have installed service pack 3 on the computer then you can try the method and check them off below if it helps:

  Change the registry to point to the installation of Windows XP Service Pack 3 files

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. Click Start, click Run, type regedit in the Open box and then click OK.

  b. find the following registry key:

  c. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

  d. in the right pane, right-click ServicePackSourcePath, click on edit, type % windir%\ServicePackFiles, and then click OK.

• Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

  Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

  The following steps may be worth a try:

  Insert your memory card into your Media Player...

  Reach... Start / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several "hard drives" listed... the
  SD card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Open... now you should see the directory of the memory card or to explore.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Also... the following items may be worth a visit:

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• OfficeJet 6500 - memory card reader is not available

  Hello

  I have officejet 6500 connected to the router by ethernet cable lan in the House

  Windows XP SP3

  I can print and scan from pc

  but cannott access the memory card reader

  the card is observed in the management of resources but is not in disk management

  an error window says (approx. translated from Italian message).

  Z: / designates a position is not available. Could be a hard drive of this computer or in a net... etc.

  Thank you

  Hi Pier29,

  I want to help you with this. Follow the steps I found posted by @pcwizard

  Follow these steps to map the card reader

  1. Insert the memory card into the printer
  2. open my computer
  3. click on network drive mapping
  4 Select the letter of the drive you want and enter the folder \\192.168.1.101\memory_card

  Note: replace the 192.168.1.101 with the IP address assigned to your printer.

  5. click on finish, and the Player opens for access to the files

  If it still does not work, look at the following memory card troubleshootingdocument. If however this does not resolve the problem, please let me know, thanks. I cross my fingers.

• TouchSmart HP Envy 15-J104sa memory card reader does not

  I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

  Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

  Thanks to you all.

  Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

• KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  Today (Tuesday 22 may 2012), after seeing the yellow icon in the taskbar, I ran Windows Update and KB2633880 - KB2518864 - KB2572073 successfully installed, I turned off the PC by clicking on the red icon Turn Off with a shield icon, expected for all 3 updates to install, 4-color and for the PC to stop itself. It took a while, but everything went well. No error message.

  After turning on the PC, I went back to Windows Update and was surprised to see Windows Update suggests to install... KB2633880 - KB2518864 - KB2572073 which is the same three components I have installed successfully.

  I ran Microsoft Fix It that 1 issue (update of Windows components needs to be repaired (next line) repair of components Windows Update.) I clicked Next. Everything went well. I had a green check mark 'Fixed '.  I turned off the PC (without having to install 3 updates which I have already installed).

  I turned on the PC and went to Windows Update, asking me to install KB2633880 - KB2518864 - KB2572073. It's like Windows Update does not "see" that these 3 elements have already been installed.

  Note: I have the same problem on another PC. The two PC XP SP3 and are stand-alone PC. One is a desktop computer. The other laptop.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.