memory card reader does not
Compaq Presaro CQ3000 model series CQ3420AN memory card reader does not read SD cards.
Where can I find download original driver.
HP have replaced the Flash drive since it was a hardware failure. Now it's working.
Tags: HP Desktops
Similar Questions
-
TouchSmart HP Envy 15-J104sa memory card reader does not
I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.
Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.
Thanks to you all.
Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.
-
TS15g067cl laptop: memory card reader does not recognize the card
The card reader does not recognize the cards. It does not have a drive location (example: f drive). This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards. I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system. I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year. Windows 8.1 has been out for some time. Why HP would sell these computers without updating the software to make them work as they should?
Thanks for the info. Disk management does not show the drive. The problem was resolved after reloading BIOS, as suggested in another post.
-
Built-in memory card reader does not
Hi all
I use an Acer aspire one 533 with windows xp sp2. My has netbook with a built-in memory card reader that does not detect my memory cards (SD cards).
FYI, the laptop has recently been recreated!
Please help me! I am in critical need of it as most of the work on readers of SD.It is very possible that you need a driver. The first place to look is the Acer site. I couldn't find your model (533) in the list but I found a 5330 model at the following link which includes drivers for the card reader:
<>http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=52 >
Start your search here:
<>http://support.Acer.com/us/en/default.aspx >If this does not help, do the Device Manager:
Start-> Run-> "devmgmt.msc".
Find your card reader in the list, double-click it to obtain information on the manufacturer and model, and then search for a driver from the manufacturer's website.HTH,
JW -
The M70-267 Satellite internal memory card reader does not work
Hello
Internal memory card reader no longer works on my M70-267.
Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
The first problem, the result of this is?Help, please
thanxHello
Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
or you can remove it from the Device Manager and restart your machine
or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.
To find the closest, you can check out this site:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORTGood luck
See you soon -
Satellite M60 - 104 - memory card reader does not read the MemoryStick pro duo
Hi guys,.
built in card reader on my laptop does not recognize/read stick memory Sony pro duo - is this normal or not?
I know it must read MemoryStick pro, but not sure about pro duo.Can you help me please?
Hello
> the built in card reader on my laptop does not recognize/read stick memory Sony pro duo - is this normal or not?
Of course, this could be a normal behavior as not all cards are compatible and taken in charge.
I would recommend look in the user manual because you can find there information cards can be used in the portable card reader! -
Satellite Pro P100-327: memory card reader does not read the Memory Stick Duo
I just received a P100-327
aShop http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=121991&Toshib = true)
According to this page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick®, Memory Stick Pro, MultiMedia Card, xD-Picture Card)", but the pdf manual that comes with it says that it supports not the Memory Stick Duo, Memory Stick Pro Duo or mini-SD.However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter, and the reader can't read one of them (they both count as Memory Stick Pro, which should be readable, right?)
Would I be able to read my Memory Stick Pro cards? Why I can't because it says that I should be able to? Should I install something first?
Hello
To my knowledge and according to the manual of bridge housing media supports media type
-SD memory card
-MultiMediaCard, xD-Picture Card
-Memory Stick
-Memory Stick ProPlease note that the Memory Stick and Memory Stick Pro are not the same in the Memory stick Duo and Memory Stick Pro Duo.
Don t mix. -
WD470AV: Memory card reader does not work
My WD470AV has a card reader for SD-MS/PRO forward. MMC SM. XD cards.
OS = Win 7 Home Premium + SP1
It seems not work when an SD card is inserted as nothing presents itself as a "disk of abduction" as if when I insert a USB external hard drive or flash drive. Can anyone point me to good drivers? The HP site to download the driver for this specific model does not work.
What advice it to check if it works or any software or drivers necessary. And where in the devices.
Thank you.
Hi @Vinviral ,
I thank your corresponding to your query.
I understand that you're looking the driver for the card reader in a HP Pavilion dm4t-1000 CTO Entertainment Notebook PC WD470AV.
You tried to access the page of the driver for your laptop, but could not.
Here is a link to sp50822.exe which is the driver for your laptop and the card reader for Windows 7.
Here is a link HP Pavilion dm4t-1000 CTO Entertainment Notebook which I was able to access using the Google browser. I hope it will work for you also.
Good luck!
-
Multiform memory card reader does not work on my Satellite M30
Nothing I will allow me to get my on my satellite m30x 111 multiformat card reader to recognize any type of memory card, I put in the slots, whether sd, mmc, etc... Can anyone suggest a solution? Should I install specific drivers? The same cards are recognized when it is attached by usb, for example in a camera, etc.
Thank you! Toby.
Hi Toby
Can you please check the Device Manager and see if there's some hardware component indicated as unknown? As far as I know that the card reader should be listed under SCSI and RAID controllers.
Please check!
-
SD memory card reader does not
Hi ive upgraded windows 7 to 8.1 now my sd card reader stopped working in my hp touchsmart 310pc that someone else has this problem and how to solve this thanks a lot.
alsithy48
Hello
I have the same problem and do not want to reinstall the operating system. Here are my details:
HP TouchSmart 600-1315xt CTO desktop PC
SD card works on other computers
All windows updates are completed
Question comes up with several SD cards, Yes... everyone that I stick in the slot.
I think I need the drivers etc and do not know which ones to dload because they are not marked.
Thank you
-
My built-in memory SD card reader does not work on Windows 8
I installed Windows 8 on my new Acer AspireOne AO756 and the SD card reader does not work. I looked for some drivers and drivers Acer only give x 64 for Windows 8, but I only have x 32. Everyone knows about this problem, and if so how to solve? Thank you
Hello
I understand that the casting of card reader does not work on your laptop.
1. you get any error message?
2 have you tried with different memory cards?I suggest you follow the steps mentioned below and check if it helps.
Method 1:
You can try to run the hardware and devices Troubleshooter and check if it helps.
a. press the Windows key + R, type Control Panel.
b. type troubleshooting in the search bar, click Troubleshooting.
c. click on hardware and sound, click hardware and devices.
d. follow the steps in the wizard to run the troubleshooter.Method 2:
You can download the driver for the reader from the link below and install it in compatibility mode.
http://Acer.supportscentre.com/driver-of-Acer-Aspire-one-ao756-Windows-7-32-bit.html
You can follow the link given below to install the driver in compatibility mode.
What is program compatibility?
http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
Hope the helps of information. If you have questions related to Windows, please do not hesitate to post, we will be happy to help.
-
Tecra 9000: SD card reader does not work with XP
I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.
I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.
Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?
David
[Edited by: admin]
Hi David
Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.
What you say, it is simply NOT true.
The Tecra 9000 was delivered with 3 different OS.
It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!Of course, there are different models with a different hardware configuration, but all supports Windows XP.
I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.
As you can see you must pay attention to many important things if you want to manually install the operating system.
Good day
-
Product name: HP 15 Notebook: my card reader does not work - Mute red light does not
My card reader does not work
It happened several times after the upgrade to Windows 10
It may work once or twice after the upgrade, but when there is an update from HP
My antiverious is Kaspersky internet security and it is compatebale with windows 10
Also, the Red mute botton does not work but the function works.
your opinion and your support is appreciated
Product number: L9N79EA #A2N
Product name: HP 15 laptop
Windows 10 House only 64-bit language
Hello @KhaledMorcy,
I understand that you are having a problem with your card reader and wanted to help you!
Have you tried to use Windows Updateto search for the drivers that are compatible with Windows 10? You can consult this site too: products HP - where can I find drivers Windows 10 and software for my model?
If you have problems to install the drivers, you can use the tool on the following site:
Open the Windows Update troubleshooting tool
It is possible that the drivers are not available for your product. If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10
Also, check out the following document, as it can help to solve the problem for you:
HP laptops - use and troubleshooting (Windows 8) memory card readers
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
Windows 7 Pro. Dell desktop computer.
My integrated card readers (there are 4) do not work. They do not appear in Device Manager. They do not appear in the computer.
In Control Panel > programs and features > I uninstalled the Realtek card reader. Then installed latest version of the Realtek site.
Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.
Tried system restore, but it failed.
What should I try?
Thank you
Hi Bruce,.
Thanks for posting your query on the Microsoft Community.
With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.
I appreciate your efforts to resolve the issue.
Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:
Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.
-
Satellite X 200 and Windows7 (32 bit) - card reader does not work
Hi all
I hope someone can help.
My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.Do I need a driver installed?
Various looked but can't find anything obvious?Bravo and thank you
DBHello
Try to install THIS driverplease.
It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.
Send comments.
Maybe you are looking for
-
What is the next update for apple tv?
-
IPETRONIK data with tiara Acquisition
Hi everyone, I need to acquire data with Ipetronik tiara, anyone has an idea how to do? TKS for all.
-
Windows XP after installing SP3, I can delete some previous updates that have been installed under SP2?
-
OK to put a x 8 Geforce video card into a x 16 slot (Optiplex 790)?
I want to put a card Geforce 630 Rev.2 in my Optiplex with Windows 7 790, but he wants a 8 x slot, and mine is 16 x. It will be OK? I just want to be 100% sure that I can't return the card if it won't work. I want this card as it is cheap, only 25W a
-
Trying to complete a school project, all Web sites have huge watermarks covering 1/4 of the video. Thought Movie Maker moght help, but none of my Webms are compatible with