Memory config for Tecra 8000 PIII/500
Can someone clarify this for me - I guess that the memory config for it would be the same as for a PC. Can I mix and match modules memory too long that I do not exceed the maximum of 256 MB. Apart from the conflict, a 133 MHz module would just run at the 100 MHz FSB speed.
So I could add a module of 128 MB 100 MHz for the standard 64 MB DIMM equipping the Tecra 8000 do 192 Mb or a single 256 MB 100 MHz module... OR 2 x 128 MB...
Thank you very much
Hello
as far as I know the Tecra 8000 has no FSB 100 speed!
So pay attention to your turn to mixture.
There are a few Tecra 8000 who BusTyp: 66 MHz Front Side Bus (1.6 volts).
Good bye
Tags: Toshiba
Similar Questions
-
Update hard disk for Tecra 8000 PII
I installed a new HD in my Tecra 8000 PII. Old pn:21 L 9540. According to the specs, I received pn:MK4021GAS can be installed in the seat of doensn t of BIOS Tecra 8000.The the new HD. I did a BIOS upgrade to version 9,31 with no result.
Is there a solution to my problem?Kind regards
Bert
[email protected]Hello
I don't know but, I am very pessimistic, you have every chance of casting more than 8 GB HDD to your laptop because there are BIOS HARD disk size restrictions! If the latest version of the BIOS does not support the new HDD it appears impossible to run!
Can you please send a link where is possible to read the specifications of this 40 GB HARD drive.
-
Beginner looking for the best upgrade memory for Tecra 8000
Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.
Is it possible that I can't find info on 256 MB extensions that are compatible
I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier
Any advice would be much appreciated
Hello
In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.
Please be careful because all modules may not be recognized by BIOS correctly.
It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.
-
Fpoppy outside disk for Tecra 8000
Hello
I need to find the right cable to run a disk drive external floopy on a Tecra 8000
Cordially AGMHello
Contact the Service partner and ask them what cable you need exactly. It is an old machine and FDD need some wider connector. Also check eBay. Maybe you can find a low price for Tecra 8000 FDD.Check a little on the net. As you know probably on the net, you will find all the information.
-
What is the max for the TECRA 8000 RAM?
AndreasHello
I don t know how much memory you have right now, but if you want to expand the memory this module is compatible
PC100 128 MB (PA3005U)
PC100 64 MB (PA3004U)Good bye
-
Updating BIOS for Tecra 8000 without floppy
I searched this forum a solution update the BIOS without a floppy drive. The only one i found was this thread [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66966&tstart=0], but there is no file .iso for the tecra 8000 series.
is there a solution to get the new bios installed on my tecra 8000 without any floppy drive?I checked Toshiba BIOS download page on http://www.toshiba.eu/innovation/download_bios.jsp and TRAD BIOS version is proposed. This old Tecra is maybe 10 years and now, Toshiba has offered traditional update the BIOS only.
Win versions are later available with latest Tecra 9000/9100.
I'm sorry.Maybe stupid question now, but why do you need the BIOS update?
-
What RAM should I use for Tecra 8000
Hello
does anyone know what RAM I need for my Tecra 8000
I need the number of PAwith greetings
Hello
The Tecra 8000 is an oldie and it therefore RAM modules that are no longer used in most models of laptops.
As far as I know, you need the module SODIMM 144 pin PC100.128 MB part number is PA3005U
Good bye
-
Need new card XIRCOM dongel for Tecra 8000
Hello
I HAVE AN ETH212 OF CABLE OF XIRCOM THAT BROKE. I CAN'T FIND ONE ON EBAY BUT MANY OTHERS.CAN YOU TELL WHERE ONE SHOULD I BUY?
Thank you
FRANKI HAVE A TECRA 8000
Hello
Looking for some online retailers that offer these cables?
I typed in the google search form and surprise, surprise XIRCOM CABLE ETH212 :DI found this site that offers different parts Xircom:
http://www.73.com/specs/ya132.shtml -
Win 2000 on Tecra 8000 PII 233
If it works OK. When I load the material utility of Tosh it installs correctly, but when I try to access it I get an error and it does not open. Do I need common modules?, can't find it.
concerning MickHi Mick
It is a very interesting question, but obviously there is no common modules for this machine tool. I can t really give you an answer, but try to reinstall the utility.
I put t see why the w2k shouldn't work ok on this device. It will be very nice if you can give us some food to return to this topic.
Thanks and good luck!
-
Need info on RAM for a TECRA 8000
I'm looking for a bit of RAM for my old laptop Tecra 8000 PII 300 model n PAT800E-B94A-GR.
Can I use 256 MB or larger? What is important to look for? I have no much experience in computer hardware.
Who has an idea?
Thx for all the help of the Germany Thomas
Hello
I found some interesting info on this good old classic. Your Tecra can handle with max 256 MB of RAM. Tecra 8000 has two memory slots, and you can use two 128 MB modules.
Module 128 MB compatible is with PA2062U part number.
-
Help: TECRA 8000 Memory slot B mailfunction
Hello
I have a Tecra 8000 for 5 years.Now slot memory B seems to be no longer works:
If it is filled, the computer does not start (are turned on, but no activity, even no toshiba logo screen)
If it is empty, the computer starts OK with 128 MB in the slot AIssues related to the:
1. is it possible to repair this and what should I check first?
2. According to the specification, maximum memory for tecra 8000 is 256 MB. Is it possible to insert all the stack memory of 256 MB in the slot and leave the slot empty B?Thank you
Michael.Hi Michael,
In my opinion the slot B is defective. You're right about the capacity of RAM. Maximum memory is 256 MB of RAM. It is tested with 256 MB of RAM but apparent with both parts of memory because I have found no extension of memory 256 MB for Tecra 8000.
It is possible that it works properly, but you must try it on your own risk. To play that's for sure, you need to connect a Toshiba Service partner!
Good luck
-
Tecra 8000: Question about upgrade hard drive
Hello
I recently bought laptop Tecra 8000 PII 400 MHZ. The laptop has 10 GB of hard drive.
I want to increase my hard drive, which is a maximum size of the HD can I increaes in my laptop?Thank you
Hello
Unfortunately there is no official document on a maximum size of HARD drive, but I think you can use a 20, 30 GB without any problem.
You can ask the service for a partner caught max supported size HARD drive or HARD drive dealer.Good bye
-
My Tecra 8000 can run XP Home?
Hi all, just joined here and spent the last hour going through the forums.
Ive recently bought a Tecra 8000 which has a HD 10 GB, 128 MB of RAM and Windows 2000. I thought that I was able to update everything and have since discovered that I can pass only safe RAM. I'll go 2 x 128 MB of ram, so I will be able to run XP home? Also, is there any other implementation of performance, I can do?
Thank you very much for any answer
SoCHello
You can upgrade the memory of the Tecra 8000 to max 256 MB (2x128MB)
These modules, you can use:
PC100 128 MB (PA3005U)
PC100 64 MB (PA3004U)
PC100 32 MB (PA3003U)As far as I know this laptop came with the 6GB. You use 10 GB of HARD drive, well in my opinion, it should be possible to use a 12 GB but I'm not sure about bigger hard drives.
However, it should be possible to install the hope of Windows XP on this laptop.
On this site you will also find drivers that are needed:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU -
Re: Tecra 8000 and module MPEG PA2834U
Hello
I would like to see on my old Tecra 8000 PII 300 DVD movies. I bought a DVD player, but the movies are restless. I know a hardware MPEG decoder (PA2834U) which can be installed as an option module option.
This module can be installed on my Tecra? Is the model number: PAT800E-B943IT, originally, it came with a CD-ROM drive.
Thank you in advance,
Massimo - ItalyHello
I have a Tecra 8000 PII 400.
The PCI card (which is actually a 'C-Cube Microsystems Cinemaster C 3.0 DVD Decoder (rev 02)') works fine with W2k.
On linux, I don't have the drivers to make it work (but I use xine player for watching movies, which is fine with the 400 MHz processor).Willi - Vienna
-
I have a Tecra 8000 flea market some time ago and Mepis Linux is installed. Everything worked fine until I gave it to my sister who spilled a cup of tea top.
Allowed us to dry out, but now, although it seems to be 'living' I get the message "ready for the update of the BIOS. Please place BIOS update diskette in the drive snd press a key when you are ready to move forward. "when I turn on the monitor.
I hope that this suggests I can restart the machine, if I install a new BIOS.
However, there is no floppy drive on this computer in which you insert a floppy disk!I tried to download a BIOS upgrade and save it on a CD, but it is not recognized, probably because there is not BIOS.
Does anyone have suggestions as to how I could try to get the machine working again?
There is a floppy driver for Tecra 8000 with a special connector.
You need a floppy drive!
Check on ebay for it or try to contact your local Toshiba service. They may have this player.
Maybe you are looking for
-
10.11 running on an iMac (2007) Since the upgrade, I can't start mail, it comes up with a dialog box saying "upgrade your library", but it just hangs, the progress bar does not move after hours. I force move to get rid of it. Any advice? Thank you
-
Impossible to install the driver OR DAQmx on OpenSuse 11.1
Hello I use NEITHER-PCI 6036E, NI PCI 6602 and card GPIB to run my experiences. Next to cards OR I only use the drivers: all programs are written in MFC. I would like to move my data acquisition to a Linux system (I am currently using OpenSuse 11.1 6
-
cannot open a file of adobe acrobat saying not a 32 application oji.pdf valid win
How open pdf flie when it is not a valid win 32 application?
-
Windows 7 32 bit on Inspiron 15 R 5537
Hello I bought Dell Inspiron 15R 5537. I tried to install Windows 7 64 bit, however, some of my favorite programs are not compatible with 64 bit. So I decided to stay with Windows 7 32 bit. But I noticed that there is no Win7 32 bit drivers ar suppor
-
The difference between ONS - SC - 2 G and DWDM-SFP
Our datacenter needs summary 6 wavelength of the sub-centres of data. All sub - DCs should contact our domain controller. We have 6509E, 15216 MUX/DEMUX and 15454-SA-HD =. List of wavelength: DWDM SFP 1535.04 nm SFP (100 GHz ITU grid) DWDM SFP 1534.2