Memory external issues

Similar Questions

• Memory external flash for iPhone 5

  IS it advisable, and if it works well if

  memory external flash like sandisk SanDisk iXpand Flash drive for iPhone 5-16 GB and 2-32GB iPad?

  good work means:

  all types of ll of audits and usable on hardware videos files,

  can a being exchanged between equipment drive, two way, in real time.

  You can use an external drive for backup or file transfer. You cannot access the files on the external drive from the phone.

• Memoria externa

  Minha memoria externa nao esta respondendo ela não abre an Access blocks a ele e nem o icon appears no meu computador

  preciso shelter-lo mas nao estou access, conecta mas não abre o than devo fazer ele?
  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  
  

  Por favor, selecione o idioma na lista suspensa acima para enviar sua question no language of his choice. O forum go e voce para Inglés only. SE você não o idioma desejado acima, suporte para may find other localidades Affairs pode ser encontrada through link abaixo:

  
  

  http://support.Microsoft.com/common/international.aspx

• remove stored memory external drive

  I bought a used hp pavilion dv5-2129wm laptop pc and the previous owner had stored several external drives in memory. Is there anyway to remove the internal hard drives?

  Hello

  I suggest that you perform a recovery on the laptop and set up fees.

  This link will help you to

  http://support.HP.com/us-en/document/c01867418

• Memory external drives under Windows 7

  Hey Microsoft,

  I just got a laptop from my new employer with Windows 7 and SP1 installed.

  I have 3 external memory devices:

  Sandisk 8 GB SD card

  a 500 GB Iomega eGo hard drive

  a 1 TB drive Seagate Portable

  On the connection of each one to the laptop, I get a notifier that it is detected - but he began looking for drivers in Windows update - and fails after a while of waiting. I tried this several times, no resolution yet.

  This is extremely annoying because I just reinstalled in a new country and many of my important documents are in hard drives.

  Windows Compatibility Center lists compatible products - so then we plug-and-play - but who does not occur.

  Can you please indicate a resolution as soon as POSSIBLE?

  Kind regards

  Ankur

  If a laptop provided/configured by the employer that they may have disabled the use of external devices, have you checked with them (their IT dept)?

• External issues with GT630 on Satellite P850-133

  As the title says, I have problems with my external graphics card, namely that it is not recognized by equipment checks. Instead, it is my integrated graphics, the graphics card Intel HD 4000, which seems to be the default video card which is a little annoying me.

  Is there a way to fix this and get my GT630 as my default graphics card?

  Useful for all the answers I get.
  Gustav

  > to know that it is not recognized by equipment checks.

  Does that mean exactly?
  It appears in Device Manager?

  The unit has been equipped with an nVidia GPU and it supports an internal Intel GPU too
  Optimus technology allows to switch between the two cards for sure the battery power

• dll memory allocation issues

  Hello

  I recently had trouble with a program that calls a dll that I write in C. The dll uses LabView functions for the memory manager to allocate and free memory for a string of Labview in an ErrorCluster.

  I know there has been a lot of posts on this topic, but none seemed exactly applies to my case.

  At the start of the vi, everything works well in the beginning, only when it ends and restart, LabView crashes. It seems as if LabView crashes as soon as it tries to free memory (amended) of th Errorcluster.

  Starngely what it always crashes. The program could be running 2 - 3 times in a row, then fall for the third time.

  I managed to reproduce the error in a small program. VI and the dll code are attached.

  I hope that I did not lack a post that already addresses this problem.

  Thanks for your help/advice

  There is nothing intrinsically wrong about changing the string handles in a LabVIEW DLL, but you must confirm to the Protocol.

  There is a very likely potential problems with your C code.

  Yoou should really ensure good packing your definition of cluster of error with

  #pragma pack (1)

  #pragma pack()

  for 32-bit Windows. Otherwise you can get by with the alignment as LabVIEW for Windows problems use packing byte to its data structures, but your C compiler will probably try to align the code string and the error on the limits of 4 bytes, resulting in your DLL corrupt pointer real string handle bad.

  In addition to this your handling and the copy of the Stiring is VERY low and therefore prone to errors.

  Instead your SetError() function might look more like this:

  MgErr SetError(LVError *thisError, LVBoolean thisStatus, int32_t thisCode, char *thisSource)
  
  {
  
      int newsize = StrLen (thisSource);
      MgErr err;
  
  Set status and Code
  
      thisError-> status = thisStatus;
  
      thisError-> code = thisCode;
  If (thisError-> source)
          ERR = DSSetHandleSize (thisError-> source, newsize + sizeof (int32));
      on the other
      {
          thisError-> source = DSNewHClr (newsize + sizeof (int32));
          If (! thisError-> source)
               ERR = mFullErr;
      }
      If (! err)
      {
            MoveBlock (thisSource, LStrBuf (*(thisError->source)), newsize);
            LStrLen (*(thisError->source)) = newsize;
      }
      return err;
  }

  and it could be even simpler:

  MgErr SetError(LVError *thisError, LVBoolean thisStatus, int32_t thisCode, char *thisSource)
  
  {
  
      int newsize = StrLen (thisSource);
      MgErr err;
  
  Set status and Code
  
      thisError-> status = thisStatus;
  
      thisError-> code = thisCode;
  ERR = NumericArrayResize (uB, 1, & (thisError-> source), newsize);
      If (! err)
      {
            MoveBlock (thisSource, LStrBuf (*(thisError->source)), newsize);
            LStrLen (*(thisError->source)) = newsize;
      }
      return err;
  }

• Monitor external issues Elitebook 820 G1

  Hello

  I have problems to connect to an external monitor, Dell 2709W, for my G1 of 820 Elitebook.

  I have an Intel HD 4400 graphics solution. The monitor says:

  Out of range signal

  Cannot display this video mode

  change the input of the computer screen 1920 x 1200 at 60 Hz.

  I use a Display Port cable for the connection.

  All the ideas I maight operate?

  My OS is Win 8.1 64bits

  I used the HP support assistant to update all hardware drivers.

  Nicolai

  Hello @nicolaimp ,

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• HP Pavilion 15-N019wm: RAM memory compatibility issues

  So, I added another 4 GB of RAM in my Pavilion (model 15-n019wm) and now have a total of 8 GB. One of the sticks is a Kingston 4 GB supplied with my HP... the other is a 4 GB Samsung that came out a Lenovo.
  I think they have the same characteristics completely in all areas (1.35v, 12800 1600 Mhz, etc..)
  When using CPUID-Z, I noticed my calendar freqs were a bit high (IMHO) with a reading of 11-11-11-26... But if they should not be closer to 9-9-9-24? Also, I would appreciate it if someone could tell me if I can go into my BIOS and adjust them at the time or is this kind of mobo that is locked? Thank you in advance for your time and your help in this matter!

  Respectfully, Ron

  ronnieron wrote:
  So, I added another 4 GB of RAM in my Pavilion (model 15-n019wm) and now have a total of 8 GB. One of the sticks is a Kingston 4 GB supplied with my HP... the other is a 4 GB Samsung that came out a Lenovo.
  I think they have the same characteristics completely in all areas (1.35v, 12800 1600 Mhz, etc..)
  When using CPUID-Z, I noticed my calendar freqs were a bit high (IMHO) with a reading of 11-11-11-26... But if they should not be closer to 9-9-9-24? Also, I would appreciate it if someone could tell me if I can go into my BIOS and adjust them at the time or is this kind of mobo that is locked? Thank you in advance for your time and your help in this matter!

  Respectfully, Ron

  Unfortunately, it is not a good way to upgrade the memory. Your system will be unstable. You will not be able to set the memory timings. This isn't a passionate we can twist trimings native and secondary and motherboard bus speed on.

  If you do things, you need to replace the two modules with compatible memory modules guarantee a memory well known manufacturer guarantee the manufacturer and the seller will be compatible. Make another way, including the method you used are a shot in the water. You were lucky that Notepad starts even in Windows.

• Windows BSOD 10 memory management issues aspire FIH57

  Hello

  I have upgraded from Windows 7 to Windows 10 recently and have met various BSOD problems. Generally, it would be a warning on the Page of corrupt of defective material but sometimes he also gave errors IRQL not less or equal. I have been in contact with Microsoft and you have run various bugfixes including troubleshooting to fix/update all drivers, sfc/scannow & dism.exe/online/cleanup-image /restorehealth where no error has been detected.

  Today, I got a new error when the computer crashed, namely a memory management error.

  I ran Windows Memory Diagnostic that has reported the following:

  Your computer has a memory problem

  Memory problems can cause the computer to lose information or stop working. To identify and fix the problem, contact the manufacturer of the computer.

  Did somebody encountered this problem before, and if so, what is the next step?

  Any help would be appreciated.

  Thank you!

  99% a bad ram module.

  If your system has 2 ram module, you can try to start with a single and made a windows memory test and see who we have problems.

• All svchost.exe memory leak issues and the answers seem to be of mid-2010.

  I tried to correct my leak memory using the anwser and so far nothing has worked.

  http://download.windowsupdate.com/v9/microsoftupdate/redir/Muauth.cab
  2012-01-07 09:52:27:625 1428 1654 Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\authcab.cab:
  2012-01-07 09:52:27:625 1428 1654 Misc Microsoft signed: Yes
  2012-01-07 09:52:27:703 1428 1654 Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\authcab.cab:
  2012-01-07 09:52:27:703 1428 1654 Misc Microsoft signed: Yes
  2012-01-07 09:52:27:703 1428 1654 Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\authcab.cab:
  2012-01-07 09:52:27:734 1428 1654 Misc Microsoft signed: Yes
  The service properties 2012-01-07 09:52:27:828 4560 1630 DtaStor update: registered with AU service is {7971F918-A847-4430-9279-4A52D1EFE18D}
  2012-01-07 09:53:50:281 1428 1654 Agent * WARNING: exit code = 0x8007000E
  2012-01-07 09:53:50:281 1428 1654 Agent *.
  2012-01-07 09:53:50:281 1428 1654 Agent * END * Agent: finding updates [CallerId = MicrosoftUpdate] of
  2012-01-07 09:53:50:281 1428 1654 Agent *.
  2012-01-07 09:53:50:281 1428 1654 Agent WARNING: customer WU didn't search for the update with error 0x8007000e
  2012-01-07 09:53:50:296 496 518 COMAPI > COMAPI - RECOVERY -: search [ClientId = MicrosoftUpdate]
  2012-01-07 09:53:50:296 496 518 COMAPI - updates found = 0
  2012-01-07 09:53:50:296 496 518 COMAPI - WARNING: exit code = 0x00000000, result code = 0x8007000E
  2012-01-07 09:53:50:296 496 518 COMAPI-
  2012-01-07 09:53:50:296 496 518 COMAPI - END--COMAPI: search [ClientId = MicrosoftUpdate]
  2012-01-07 09:53:50:296 496 518 COMAPI-
  2012-01-07 09:53:50:296 496 9 a 4 COMAPI WARNING: operation failed because the previous error, hr = 8007000E
  2012-01-07 09:53:50:296 496 9 a 4 COMAPI FATALE: impossible search asynchronous complete. (hr = 8007000E)
  2012-01-07 09:53:55:296 1428 1654 report REPORT EVENT: {D9F17968-B8BC-481E-AA08-5EDA6B57B321} 2012-01-07 09:53:50:234 - 0500 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8007000e MicrosoftUpdate software synchronization failure Windows Update Client did not detect with error 0x8007000e.

  Hello

  ·         What are the troubleshooting steps you have tried?

  ·         You try to install Windows update? If you try to install Windows update then update you are trying to install?

  ·         What is the exact error message?

  Response with above information to better help you.

  I suggest you follow the steps in the link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070008-or-8007000e

  Note: this link is also applicable for Windows XP.

• ThinkPad R51e memory compatibility issue

  Hi all

  I need help please. I have a Thinkpad R51e, who works with a 256 MB DDRII 533 module MHz I checked on the Lenovo site and the maximum memory supported is 2 GB. I bought 2 x 1 GB DDRII 800 MHz and a single module modules can be inserted into a location at any time. As soon as the two modules are inserted the laptop beeps indicating a memory error. What is really frustrating, is that I can insert the 1 GB and 256 MB modules as well and the laptop will run and detect both.

  Could someone point me in the right direction please? I am an I.T. Tech and what smeared me.

  Thank you

  Ben.

  I think that R51e motherboard does not support the memory at 800 MHz.

  On Lenovo site "using 533 MHz SO-DIMM memory is recommended for this system."

• XPS-200 [and Dimension 5150C] memory addressable issue...

  I have a question on a very old PC - Dell XPS-200, Intel D 820 2.8 GHz, BIOS A07 - I am fixing to the top for a friend. Windows 7 Professional installed a 64 bit version of the operating system and properties system reports it as a 64-bit system. However, it shows that, although 4 GB of RAM is installed only 3.2 GB is used which is a message that I expect to see on a system 32-bit.

  As the Council and the processor are both 64-bit components I am at a loss as to why he is not seeing all of the 4 GB of RAM. There use a graphics Radeon HD 5450 and BIOS is set to allow only a very small amount of RAM so I don't think that's it.  According to the Intel chip plug the CPU has a 64-bit set statement and supports the extensions of physical memory on 32-bit, which allows him to address more than 4 GB.

  It seems to work OK and I know that if push comes to shove I can install a 32-bit system. But I understand why it is not recognizing all of the RAM and if there is any kind of patch/fix/update available for this machine that allows him to recognize all the 4 GB of RAM.

  When the XPS-200 [and Dimension 5150C] was introduced at Christmas 2005 were not a lot of choice of 64-bit hardware, so it came with a 32 bit OS, but I see he got an update of the BIOS in January 2007 which I would have guessed had to add extra CPU/RAM support but I can't find anything that describes what the A07 update was intended to do.

  Other suggestions from trash, use 32 bit, etc - I already understand these options :) - I hope that someone has enough technical familiarity with this machine/architecture to respond definitively to know if there is anything I can do to get it to recognize all the 4 GB of RAM.

  Thanks in advance for your help,

  Howard
  Redmond, WA

  PENTIUM D 945 chip sets not 5150/E510.   However, it will work well for 64-BIT windows 7 8 or 10 in a precision 380.

  Full 4 GB or 8 GB is fine precision 380 with 955 X chipset.

• BlackBerry Smartphone memory card issue

  I have the 8520 and 8530 is not sure which but I bought a microSDHC memory card is compatible? I'm not sure of the part HC!

  Hello

  HC simply refers to "Large capacity", a designation that is placed after that I think that 2GB. But, no question... of compatibility between a memory card and a BB is governed by the size of the media card and the level of operating system running on the BB... see this KB:

  • KB05461 Sizes of card MicroSD taken in charge by the BlackBerry device software

  Good luck

• Two memory management issues

  Hello

  I'm integrating the SDK to use with javascript thanks to a plugin for Illustrator.

  I have two questions about the release of some resources allocated by two functions:

  1 GetDocumentXAP returns a large char * allocated internally by it, which should release who and how?

  2. If TextRangesRef * pTextSelection is returned by GetTextSelection, is there a way to set her free after use without using a mySelection (selectionRef) of ITextRanges?

  Thank you.

  1 GetDocumentXAP returns a large char * allocated internally by it, which should release who and how?

  The header said nothing on that are allocated. Did you get this information when a memory leak detector running?

  2. If TextRangesRef * pTextSelection is returned by GetTextSelection, is there a way to set her free after use without using a mySelection (selectionRef) of ITextRanges?

  TextRangesSuite::Release?