Memory not correct system on Satellite L30-105

Similar Questions

• 4 GB memory not correctly reported on Satellite A200 - 19L

  I installed 2 pcs of modules of memory Kingston 2 GB in my A200 - 19L, but unfortunately I had only 3 GB of read in the BIOS and if the Vista operating system!
  Of course because he reads the BIOS memory size
  but when I run the PC diagnosis, it signals the ful 4 GB
  Please I need a BIOS update, I need that 4 GB in my machine.

  Hello

  I have already provided an answer to a similar question!
  After memory upgraded to 4 GB as the 3, 2 GB were visible.

  Why?
  Well, system resources require addressing which overlaps physical memory below 4 GB.
  These requirements can reduce available addressable memory space to and reported by the operating system.

  Please check this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24075&MessageID=88420

  Best regards

• Satellite L30-105 will not boot after memory expansion

  Hello

  I have a Toshiba Satellite L30-105, with 1 GB of memory (2 X 512 MB modules).
  I bought 2 X 1 GB-compatible modules to extend the memory to its max.

  When I install the two new modules the laptop won't boot. I tried to install one at the time and both work individually. I also tried 1 X 512 MB
  and 1 X 1 GB, which also worked.

  Help I have updated the bios but still can not computing for work with 2 GB of memory?

  Thank you
  Rebmark

  I am also interested what compatible modules you use.

  Just FYI: your laptop model can handle with 2 GB RAM and compatible module - 1 GB DDR2-400/533 (PA3411U-1M1G).

• Satellite L30-105: how to change shared video memory on Vista...

  My question is the same as we can read on this url:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20578

  But the solution only works with windows xp, anyone know a driver version with which the 'frame buffer' tab is present?
  The latest version of the driver is installed on my Satellite L30-105(catalyst 7.6), 128 MB are shared, but 32 will be enough for me.

  Thanks in advance

  Brux

  Post edited by: brux

  Hello

  I think the problem is that Vista graphic driver does not support this option.
  The option described in the in the other thread was available in the argument XPOS.

  But why would you change? On my L30 128 MB shared memory are activated, but the laptop uses only 64 MB if I put t run all applications performance.
  The pilot controls the amount of shared memory automatically.

  You can se under control panel-> display-> advanced settings
  In the map tab, you can see total graphic memory available (in my case 128 MB) and system memory shared (64 MB)

  By the way; I don't think that 32 MB graphics memory may be sufficient if you're running Vista

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Satellite L30-105 does not recognize the 1 GB of additional RAM

  Hi there I hope someone can help me

  I have a Satellite L30-105 PSL33E, which came with 1 GB of ram installed (2 x 512 MB made by TeamViewer)
  and it's terribly slow with vista, not to mention programs.
  The toshiba website says max RAM is 2 GB, so I bought a Kingston 1 GB ram chip to increase the ram to 1.5 GB. I thought should try before moving to 2 GB

  However after installing memory vivid it's show still only 1 GB in windows and in the bios (894 + the rest for video). It has the latest available BIOS on the site 3.10, yet still does not recognize the chip.

  The chip is installed in the lower slot, including the original 512 at the top (closest to the keyboard)

  Are limited to only some of the Satellite of RAM?
  The old subjects indicate if kingston does not work try corsair.
  Other topics suggested to change slots
  Others suggest that it may have only two of the same ram chips in IE 2 x 512 or 2 x 1 GB, you may not have 1 of each

  Can anyone help? everyone knows about similar problems?

  I will not buy any more RAM to try different brands for the same issue to occur

  Hello

  The L30-105 is able to manage the 1024Mo modules in each location it should be able to update the RAM up to 2 GB.

  > Why the RAM 1 GB module cannot be recognized?
  Perhaps the two modules are not compatible with each other
  I would recommend using two identical modules of the same manufacturing
  I use Kingston modules, they are ok for me

• Satellite L30-105 Dual Boot with XP Possible

  Hello

  I have a Satellite L30-105, and while I do not particularly like Vista, I need to keep it for various reasons. However, I must also now use the laptop with a piece of hardware (a North G2 synthesizer) who does no Vista drivers.

  So I think the best thing I can do is to create a dual boot system, but a lot of articles on the net say you need from your CD original Vista, and of course the laptop does not come with one.

  So what I want to do possible? And there at - it a guide for how to do this? I have an XP license and the CD that I can use for this.

  Hello

  I installed the XP and Vista on my laptop.
  It was a little difficult because the XP installation crushed the Vista MBR (master boot record) and the Boot Manager.
  But I solved it by using the original CD of Vista. I had to borrow from a friend.

  I booted from CD of Vista and it repaired the Vista Boot Manager.
  Then I installed the tool called EasyBCD and set up the Vistas Boot Manager.

  That helped get XP and Vista on two different partitions.

• Problems with Benq DC C 700 digital camera on the Satellite L30 105

  Hello

  I have problems with my digital camera when I connect it to my laptop. Whenever I connect the camera to the laptop freezes and gives me the blue screen of death, in other words, the screen you get when a fatal error occurs, and then my laptop must be restarted. If this happens whenever I connect the two.

  I tried the bios update and install the latest orders, but nothing seemed to work. I contacted the support center in Benq and they told me to contact Toshiba as they are sure that the problem is not with the camera. So please someone, if you have any ideas or suggestions or solutions, I'll be happy to hear.

  Thank you!

  Hello

  First of all if you need Toshiba support, you will need to contact Toshiba authorized service partner in your country. This forum here is only a forum for users and you won't find anyone from Toshiba here.

  On the other hand;
  It seems that the Satellite L30-105 has been bundled with Vista. Using this operating system on the L30?
  I read on many problems with the 3rd devices, software, and Windows Vista.

  I put t know what said you, but eventually the software webcam is not 100% compatible with Vista.
  You should know that the BSOD appears if there is a serious hardware problem or software. I don t think that this problem was caused by a hardware issue and so there is only one possibility; software compatibility issues.

  In case you I would update the Vista of the State and I will ask manufacturing webcam if it s 100% compatible with Vista.

  Good luck

• Satellite L30-105 - lack of HARD drive connector

  Hello

  just picked up this laptop Satellite L30-105 for his son who had some hard drive purchased.

  I see specs it's a disc sata hard again, but the problem is that the laptop seems to be missing the connector on the hard drive.

  The laptop has just 1 row of holes where the disk sata hard was 2.

  Anyone knows where to buy connector or any help would be great thanks dave.

  You are right.
  The laptop supports SATA 2.5 HARD disk and so you should be able to use a SATA 2.5 HARD.

  I'm not quite sure which adapter is absent, but my 2.5 SATA HDD contains a piece of plastic that is removable
  Maybe you need it however, I think you could ask for except if a mobile technician in downtown or you could order it from a Toshiba authorized service partner in your country.

  Good bye

• Re: Need Satellite L30 - 105 Vista - power calibration error - new firmware

  Hey guys =)

  Ive got a Satellite L30-105 running a Vista 32 bit. And even if I try several different (Imageburn, Nero) burning software, and with the TDK - CD, I get an error in the burning software, saying "power calibration error".

  Satellite L30 - 105 (item number PSL33E-02S026N5), use a cd/dvd burner called MAST * a DVD-RAM UJ-850 s

  I wonder, can I download and install new drivers for my dvd player?

  I will also try to buy this "cleaning-cd", to try to clean the lens. cause I bought the laptop in 2007... then her grandmother as...

  But you guys don't have any what could be bad? Is it expensive to get a new cd/dvd drive for this laptop?

  Bravo and thank you!

  Hello

  Power calibration error means that the laser ODD lens cannot calibrate in the right position.
  Generally this has nothing to do with a firmware of drive but with the problem of equipment.

  In most cases, the CD/DVD drive must be replaced.

  I'm not sure how a new CD/DVD drive could be but the fact is that you cannot use any CD/DVD drive
  You need a compatible and such disc compatible and taken in charge could be ordered in a local ASP.

  welcome them

• Satellite L30-105: an Intel Pentium Dual Core slogan says, but I have Celeron

  Hello

  My machine has an Intel pentium, near the touchpad sticker that says "* Pentium Dual Core inside." But then the information system listed my CPU as * Celeron *...

  Have I been duped and is this false advertising?

  Thank you

  Mark

  Hello

  I have goggled a bit and found that this laptop Satellite L30-105 was certainly equipped with the Intel Pentium Dual-Core CPU T2060 1.6 GHz.

  I m similar L30 owner as a second notebook and at first start, I noticed that the Device Manager recognized the incorrect CPU.
  I've simply removed the entry CPU since the Device Manager and rebooted again the Vista again recognized the CPU and advised the right CPU.

  Please check this box. Maybe it helps.

  Greetings

• Blue screen when you use the CD/DVD on Satellite L30-105 player

  I have a Satellite L30-105. Recently when using the CD/DVD drive, it began to crash (blue screen) after playing a DVD-video or a music CD.
  Either way, I seem to only get playback of DVD-video and not the main sound track. Does anyone have an idea what may cause these errors.

  Hello

  To my knowledge, the blue screen starts if there is a serious software problem or if some of the equipment is malfunctioning.
  I put t believe that this blue screen error message can be caused by a defective CD/DVD drive.

  Hmm, according to your message and you can not hear the main sound and cannot read music CDs, I think that this problem could be linked to the sound card.

  In the first case I recommend updating the audio driver. If this does not help, try to recover the laptop with the supplied recovery CD and check if the same thing always happens on the new BONES recovered. (Don t install any 3rd party application).

  Good luck

• Windows vitual PC / XPM on Satellite L30-105

  Hello

  I'm running Windows 7 on my Satellite L30 - 105. And it works very well.

  Now I would like to install Windows Virtual PC to run Windows XP virtual Mode. But the laptophardware does not support
  a virtual pc. Is there a solution for this problem?

  Thanks anyway.

  Ciao
  Guido

  Hello

  Sorry mate, I don't have good news for you, but there is no solution for this problem.

  The point is that virtualization must be supported hardware (CPU, motherboard, chipset) and BIOS too. This means that you can t something to use virtualization.

  The only option is to buy a new laptop. ;)

• How to get openGL 1.2 on Satellite L30-105?

  I have a Toshiba Satellite L30-105 with a Radeon x200m gfx/chipset.
  I tried to run a game which requires openGL 1.2 + and was surprised by the fact that I had didn't on my computer.
  Then I tried to download it, but found that he could only be installed via drivers for my graphics card!

  But I put t don't know how!

  Could you please help me?

  Search for * xtreme warcat * for twisted drivers. I suggest upgrade you your memory to 2 GB 667 mhz bus for better performance.

• Satellite L30-105 (PSL33E) - BIOS downgrade succesfull

  Hi all
  first of all sorry for my English.

  I am the owner of Toshiba Satellite L30 - 105 (PSL33E) bought in Italy. I wasn't stisfied v3.10 update of the Bios and I searched for the old version of bios, but on the server of European support, all the old bios (-2,6 3.0 etc.) disappeared.

  Read this thread http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=120416 I read about using files of bios of US to downgrade the bios as suggested to user Anhchuong.

  Many of us was skeptical about using U.S. bios on laptop computer EU.

  After a lot of time and knowing US L35 - S2366 (PSL33U) have exactly the same specification of the mine (except mine have 1024 ram instead of 512 b), I decided to use v 3.0 bios version to update my bios. EVERYTHING WORKED!

  At the moment, I am writing from my lappy and I can confirm that CPU temp is degrees 6-7 °.

  Hope this helps someone else.

  Thanks for your posting. This is a very useful info.