Memory problems / accidents (iOS)

Similar Questions

• I have problems with ios 9.3.5

  my ipod says it's still Friday, September 23 when it is Monday 26 and is stuck in the 04:00 time when I change the time, the screen turns off a color at random, then restarts then both will and I have to change but rest later if it changes at all used to date will not change anything and it runs still works when it wants to and it doesn't stay connected to WiFi , I have the ipod 5th generation and am not elligible for ios 10 Please if you can solve this problem with ios 9.3.5 I would be very grateful as I use my ipod for almost everything. Thanks - René

  It is a community based on the user. You do not speak to Apple directly. You can contact the Apple Support here: http://www.apple.com/ca/contact/

• Ringtone-problem with iOS 10.0.1

  I have an iPhone6 with the current iOS10.0.1. In my previous iOS I could assign a ringtone to each contact that I made. After the update to iOS10 default ringtone serves only is not available, but then, not really for me to use. I have different need to SMS or ringtones to my alarm as first responders.
  Unfortunately, I have already asked this question here, it was always there, because it was so yesterday at the Golden Master version...

  Same problem here, iOS on iPhone 6 s. 10.0.1 I have just try to reset the option, without result.

  Ringtone contacts seems to be circumvented through the ringer system default.

  I think we have a bug here...

• Unfortunately I can't move my watch to watch OS 2.2! Why! Is there a problem with IOS 9.3.1 really no advice did not work

  Unfortunately I can't move my watch to watch OS 2.2! Why! Is there a problem with IOS 9.3.1 really no advice did not work

  Hello

  If you have already installed a beta seed or a developer, first remove all beta profiles.

  Instructions are available here:

  Update the software on your Apple Watch - Apple Support

• iPhone wifi problem 6 ios 9.2.1. WiFi show still unable to join or incorrect password! Help, please

  iPhone wifi problem 6 ios 9.2.1. WiFi show still unable to join or incorrect password! Help, please

  You need the correct password to join any Wi - Fi hotspot which are not free.

  When you try to connect to Wi - Fi.

  Have you tried

  Settings > general > reset > reset network settings?

• Anyone having problems with iOS 9.2.1? Storage problems, apps not working?

  Anyone having problems with iOS 9.2.1? Storage problems, apps not working?

  No, not at all. Maybe if your were to describe the issues a little more in detail, someone might be able to help.

• Equium L20-197 - memory problem

  I have memory problem with pc-world of computing L20 and currys sell the L20 with suite spec 256 MB of main memory and 128 MB of video memory (up to 128 no) when this is not the first case of all memory is shared and there are 64 MB main memory and when you try memory video in bios , it won't let you upward in rising to 128 unless you install another memory stick no matter who else noticed this problem? I know that the previous model of the L10 with intel video chipset was supposed to allocate depends of the video memory load, but there is no mention of this on the ati chipset model. all the ideas!

  Hello

  AFAIK usually specification is 32 to 128 MB shared memory. Probably, it should be possible to put it in the BIOS. On some units with ATI graphics card, it is possible to put it under properties of ATI (display properties > advanced). There is an option to change the value of the AMU which will change the RAM allocation shared to the graphics card. It's usually adjustable 16 MB, 32 MB, 64 MB and 128 MB.

  Can I really don t give you answer correct but my friends a laptop with 512 MB RAM and it works fine.

  Good bye

• My data hard drive is about to die, or it is related to a memory problem?

  My windows 7 x 64 operational system joined as well as all my applications is installed in an ssd and there is a hard drive to store data. My system is as follows:

  Motherboard: GIGABYTE GA-X58A-UD3R

  MEMORY: KINGSTON KHX1600C9D3K3/12GX DDR3 12GB (3X4GB) PC12800 1600 MHZ HYPERX GENESIS TRIPLE CHANNEL KIT

  CPU: Intel Core i7 930 (s1366, 2.80 GHz)

  PSU: Enermax MODU87 + 700W 80 + gold PSU EMG700AWT

  HARD drive: Western Digital Caviar Black 1 TB HDD (64 MB of Cache, 7200 RPM, Sata III)

  SATAIII SSD : SSD Samsung 840 PRO Series 265 GB (model MZ-7PD256)

  I rarely have the problem which is depicted in the icons following (I speak for hard drive data storage):

  No preview of the photo, but I can see a specific image when I double click on it

  

  

  records are missing

  

  After this problem, I went to check if the same thing was happening in the icons in the primary system ssd. Therefore, I went to start--> pictures--> sample photos and I could see a glimpse of the images.

  

  I was also able to move through each folder I wanted in the ssd. Then I double clicked on 'computer' icon and the following happened.

  

  I was able to close the window without any problem. I think that it is a hard drive problem, but could also be a memory problem. What is your opinion on that? Another weird thing that happens, is the loading time on a cold start the msconfig.exe file. Sometimes the file loads instantly and other times it takes several seconds (7-10) to load on the screen. If it is not a cold start, then the file always loads instantly. The same thing happens also with the Task Scheduler. It seems very strange to me. Please note that Superfetch, Prefetch, Defrag, Windows backup and indexing are disabled.

  Finally, I found the solution to my problem. When I got a memory low message (12 GB of installed RAM memory) I couldn't believe my eyes.

  

  I immediately opened the resource monitor, went to the memory tab and I just saw the dllhost.exe file has consume all memory. I thought that this file was infected and I checked both versions of them (x 64 & x 86) with virustotal, but it wasn't the issue. When I read that this file system is loaded to restore media files in thumbnail view in windows Explorer, I remembered that I had a defective mp4 file that could not be opened. I knew I had to do. I had to delete this file. The problem is that while you try to remove a defective media file, the dllhost.exe file tries to make it, so you are not able to delete until the end of dllhost.exe through process Explorer process.

  Conclusion: When you see a media file that it is not rendered in the thumbnail, view then this file is probably defective and the dllhost.exe goes to an infinite loop, while he tries to make this file, until it consumes all your RAM memory!

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• Microsoft Photo Viewer memory problem / unable to print images... (2 questions)

  The other day I tried to print a photo (.jpg file) color - so I deactivated the "Print in grayscale" checkbox in the properties of the printer (just like always).

  But after clicking on the OK/Print button in the Print Wizard Photo, 4 the same error windows pop up.

  Translated from Danish:

  "An error occurred during printing.
  "The images cannot be printed due to the following error:

  ... But there is no description of error?

  Now 4 error popups every time I try to print an image (.jpg or .png) - but NOT when you print documents containing images (.pdf and .odf) that prints very well.
  .txt files print as well...

  Standard Windows 7 Photo Viewer no longer works. He tells me that I have not enough memory on my system to display the selected image (.jpg-file 3 MB)...

  I'm on a system Windows 7 Home Premium with 4 GB of RAM installed - I'm only using about 1 GB of them at the moment - is NOT a memory problem.
  The CPU usage is also about 1%...

  Any thoughts?

  Kind regards

  I hate this chime late trying to solve this problem, but I had the exactly the same problem (per month) and finally resolved.

  What has not worked:

  • Reinstall Windows 7 as an upgrade on the spot.
  • Upgrade to Windows 8 (improved the situation, but did not fix)

  What makes:

  • Create a new user account, it set until I transferred the old user account settings.
  • Set the color management settings.

  Before you reinstall, I suggest to create a new user account and try printing once logged into the new account. If the photo printing Wizard works when logged in with a user account, the problem is specific to the settings for the user account with the problem.

  To check the color management settings try this:

  • Click Start
  • Color in the search box type
  • Click on color management in the results of the research
  • Click the Advanced tab
  • Make a note of any settings that do not start with the system default
  • Change all settings that are not listed as default from system to system default
  • Close the color management dialog box and try again the Print Wizard

  In my case it was a colour profile Adobe corrupted causing the problem.

• When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours Unite

  When I select a sequence of five frame to render HDR in Lightroom it merges files in a preview very well. But when I click on the Merge option, the progress bar is obstruction of about 42% complete. I suspect a memory problem, so I spent a few hours uninstalling a bunch of useless software on my laptop and still photography will not merge the HDR sequence. It worked once before, but now it does not work. Help!

  I just 8 GB of RAM and have been able to put together five separate images HDR images. I compared these files 5-image HDR with files - 2 and 3-image and see improvement very few (if any) using all five. Your results may vary, but you can try to reduce the number of images until you get your new laptop.

• New PPr upgrade and memory problems now

  I upgraded my version of PPr CC 2015 20 days ago and I went back to make a project that I had previously worked on and made more than 3 weeks. Now, it will not be made and the computer is just running out of memory and encoding is abandoned. I am on Windows 7 with a 2 years old i7 processor and have been able to use the first Pro CC 2015 without problem until the upgrade to the latest version that came out about 20 days ago. Are there bugs that are being developed here? Thanks for any info. I had the project made out by removing all effects to make sure it was a memory problem and quite sure the file render out with effects off the coast. However, I could make with effects on before this update.

  Thanks for you response Brian.

  Can you remove the effects of light and then give it a shot? Effects of light seem to be common with those who have reported this problem.

  Thank you

  Regalo

• Memory problem... Can someone help me please?

  I have Windows 7 64 bit with 8 GB of ram...
  I have installed SOA/BPM running the DEV version (IE is running with the ADMINISTRATOR of the server) and I begin to see the errors in the log...
  What I can shape to allow to WebLogic remain in place and be happy with memory, that he (the Task Manager shows 3g available)!
  
  < 26 August 2011 12:35:04 CEST > < critical > < health > < BEA-310003 > < free memory in the server is 4 867 280 bytes. There is danger of OutOfMemoryError>
  
  THANKS to YOU all!

  You can set your args memory in your [your path]/user_projects/domains/domain1/bin/setSOADomainEnv.sh

  That's what I put and I have no memory problems more. Other values (below) may be more appropriate for your machine. He recommended to do not to go higher.

  DEFAULT_MEM_ARGS = "- Xms2048m - Xmx2048m".
  PORT_MEM_ARGS = "- Xms2048m - Xmx2048m".

  Heidi.

• JRun.exe memory problem

  I use Coldfusion 8 Developer Edition as a test server for the development of Web Dreamweaver sites. I am running Windows Vista Home Premium and 2 Gig of memory. When I start my computer I will meet some memory problems that I traced to jrun.exe that part of Coldfusion. For perhaps the first time jrun uses much more together half a million members. After that it drops to about 60 000 k. Does anyone know how to reduce?
  
  I am a user of medium level with no experience of server beyond establishing edition developer of CF admin using mostly default settings. I found bandages on this problem, but all were way over my head. All suggestions must be very precise and not in server admin jargon.

  I have not the slightest idea what a 'max heap' is or what "garbage collection" is, but I found the setting of the administrator. I reduced from 512 MB to 256 and it does not seem to affect the application to all, and it reduces the memory usage to the point where it does not affect other applications. Thank you.

• use iOS 9.2 memory problems

  I have problems with my use of memory with the new IOS 9.2 update. My memory is going to jump autour on how I actually have left, he will be telike me a measure a moment and another the next. Anyone know what is happening here? Currently Air on an iPad 16 GB and should have a lot of available memory, but this problem tells me I am low on memory.

  Hello

  Try a reboot of the force:

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  Jack