Memory problems and questions related to the process

Similar Questions

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• I bought two licenses adobe and I can't use them because they are expired, expiring 2017/03. I had this problem and solution still has the air of 15 days!

  I bought two licenses adobe and I can't use them because they are expired, expiring 2017/03. I had this problem and solution still has the air of 15 days!

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific product - Mod support forum]

  Hi Eugenio,.

  It seems to be a problem of implementation.

  Try wearing the same query in the General Photoshop Discussion where experts can help you.

  Kind regards

  Sheena

• Question related to the entrance with pci 6221 and SCC 68 analog

  I use 6221 PCI and SCC 68 analog read of voltage between the terminals of the drain and the source of a transistor. The drain is at 0 Volt and source is connected to 5 volts via a 100 k resistor. The transistor is used as a follower of the source, and therefore the output is measured at the source of the Terminal. When I measure the voltage by using oscilloscope, I see clearly the change of output as a result of change of voltage of the door. But, when I try to acquire the same by using labview, I see nothing. I tried to change the signal to the CSR, NRSE, but nothing works. Seems to be that something related to differences in impedance. Can you please advice me on this issue? Thanks in advance

  Hi rsd111,

  I understand that you measure a circuit similar to this ( http://en.wikipedia.org/wiki/Common_drain)

  I also get that you use an external power supply with GND connected to the Drain and - 5V connected to the Source with a 100 k resistor.

  You should be able to measure the tension between D and S setup a differential measurement and connection Ai0 + D and Ai0 - s, in fact you can youse Ain you prefer.

  You should be able to do the same measure also at configuration NRSE linking Ai0 AiSense at the Source and drain.

  The Board's input impedance is greater than 10GOhm, it must behave as the oscilloscope in pairing mode high-impedance DC.

  6221 specifications: http://digital.ni.com/manuals.nsf/websearch/8117DF4C5A29C95C862573020061023B

  Nice day.

• question related to the configuration of POF and use-sub-classes

  Hello
  
  I noticed that by default POF in coherence.jar (coherence-pof - config.xml) requires the use subclasses true indicator (the ultimate-sub-classes use value is true if any POF loaded configuration file specifies that it is true), and making it impossible to obtain if certain error messages a subclass of a registered type is not listed specifically in the POF-configuration and users can silently losing data in this way.
  
  My question is:
  
  The indicator of use subclasses in coherence-pof-config. XML set to true only because of Throwable-s, or are there other classes provided by coherence that are serialized by a resolution of the subclass and so dependent on the indicator of use subclasses being true?
  
  If only the Throwable-s which depend on, instead of set to true, can we set it to false and use the following instead of ConfigurablePofContext as class the class serializer for POF-enabled services:
  

  import com.tangosol.io.pof.ConfigurablePofContext;
  import com.tangosol.run.xml.XmlElement;
  
  /**
   * This class extends ConfigurablePofContext with the possibility to
   * configurably disable the subclass-allowed setting forced true in the
   * coherence-pof-config.xml, and still be able to use ThrowablePofSerializer for
   * each not specifically configured Throwable subclass.
   *
   * @author Robert Varga
   */
  public class ThrowableAwareConfigurablePofContext extends
        ConfigurablePofContext {
  
     /**
      * By setting this flag to true, it is possible to disable subclass
      * resolution. Interface resolution remains untouched.
      */
     private boolean m_fDisableSubclassAllowed;
  
     /**
      * {@inheritDoc}
      */
     public ThrowableAwareConfigurablePofContext() {
     }
  
     /**
      * {@inheritDoc}
      *
      * @param sLocator
      */
     public ThrowableAwareConfigurablePofContext(String sLocator) {
        super(sLocator);
     }
  
     /**
      * {@inheritDoc}
      *
      * @param xml
      */
     public ThrowableAwareConfigurablePofContext(XmlElement xml) {
        super(xml);
     }
  
     /**
      * Sets the {@link #m_fDisableSubclassAllowed} flag. You can set this as an
      * <init-param> in the Coherence cache configuration file.
      *
      * @param disableSubclassAllowed
      */
     public void setDisableSubclassAllowed(boolean disableSubclassAllowed) {
        this.m_fDisableSubclassAllowed = disableSubclassAllowed;
     }
  
     /**
      * @return false if disableSubclassAllowed is true, or result from the super
      *         implementation otherwise.
      */
     @Override
     protected boolean isSubclassAllowed() {
        return (!m_fDisableSubclassAllowed) && super.isSubclassAllowed();
     }
  
     /**
      * If the super implementation could not resolve the type id for the class,
      * and subclass-allowed is disabled and clz is a {@link java.lang.Throwable}
      * subclass then it falls back to the configuration for
      * {@link java.lang.Throwable}.
      */
     @Override
     protected int getInheritedUserTypeIdentifier(Class clz) {
        int result = super.getInheritedUserTypeIdentifier(clz);
        if (result == -1 && !isSubclassAllowed()
              && Throwable.class.isAssignableFrom(clz)) {
           result = getUserTypeIdentifier(Throwable.class);
        }
        return result;
     }
  }

  Thank you and best regards,
  
  Robert

  Hello

  Ok. Here goes. Yes, you are right. If you can tolerate interface use being true, the only thing you have to worry is Throwable instance (or subclasses it) in Java and Exception instances (or subclasses it) in .NET.
  Please let me know if you have more questions.

  Best regards
  -Dave

• Question related to the bays of transients

  Hello

  I have a memory error loading simple a helloworld applet that uses a transient 256bytes array in the constructor.

  I use a yubikey neo (atr FE: 3B FA 13 00 00 81 31 15 59 75 62 69 6 b 65 79 4th 45 4F A6), JCDK 2.2.2 and the Eclipse plugin. The PAC file is loaded using YPG.

  I can load only one instance of the applet (AA010203040506070809 help for example) correctly, but I get a memory error when I try to load a second copy (for example with the help of BB010203040506070809).

  Error message when loading the applet is: APDU response: 6 to 84.

  I'm sure that this error is due to the presence of an array of transitional: If this line is deleted, I can easily load multiple instance of the applet (the PAC file is only 3kbyte and I can easily load a cap of 30kbyte file).

  I don't understand why the memory error when loading of the applet (and not during execution) since the transient table is allocated in the RAM (as far as I understand).

  Secondly, two tables of 256 bytes doesn't seem much to me, since the yubikey has about 2915 byte memory transient available (depending on JavaCard support test).

  Obviously, I'm missing something but I don't know what.

  Here is the code of the applet (helloworld Sun modified with a line of the constructor):

  {code}

  /*

  * Copyright 2005 Sun Microsystems, Inc. All rights reserved.

  * SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.

  */

  // /*

  Workfile: @(#) HelloWorld.java 1.7

  Version: 1.7

  Date: 01/03/06

  //

  Archive: /Products/Europa/samples/com/sun/javacard/samples/HelloWorld/HelloWorld.java

  Change: 03/01/06 19:01:06

  Original author: Mitch Butler

  // */

  package helloworld;

  Javacard.framework import. *;

  /**

  */

  public class helloworld extends Applet

  {

  Private byte [] echoBytes;

  private final static short LENGTH_ECHO_BYTES = 256;

  Private byte [] transientarray;

  /**

  * Only installation method of this class should create the object of the cmdlet.

  */

  HelloWorld() protected

  {

  echoBytes = new ubyte [LENGTH_ECHO_BYTES];

  transientarray = 256 JCSystem.makeTransientByteArray ((short), JCSystem.CLEAR_ON_RESET); / / Transitional table causes the error of memory when loading the

  Register();

  }

  /**

  * Install this applet.

  @param Baker table that contains the installation settings

  @param bOffset starting in Baker offset

  @param bLength the length in bytes of the data parameter Baker

  */

  Public Shared Sub install (byte [] Baker, short bOffset, bLength bytes)

  {

  new helloworld();

  }

  /**

  * Treats an incoming APDU.

  * @see APDU

  @param apdu incoming APDU

  ISOException @exception with the bytes of response according to ISO 7816-4

  */

  Public Sub process (APDU apdu)

  {

  ubyte buffer [] = apdu.getBuffer ();

  short bytesRead = apdu.setIncomingAndReceive ();

  short echoOffset is 0 (short).;

  While (bytesRead > 0) {}

  Util.arrayCopyNonAtomic (buffer, ISO7816. OFFSET_CDATA, echoBytes, echoOffset, bytesRead);

  echoOffset += bytesRead;

  bytesRead = apdu.receiveBytes (ISO7816. OFFSET_CDATA);

  }

  apdu.setOutgoing ();

  apdu.setOutgoingLength ((short) (echoOffset + 5));

  header of the echo

  apdu.sendBytes ((short) 0, (short) 5);

  the echo data

  apdu.sendBytesLong (echoBytes, (short) 0, echoOffset);

  }

  }

  {code}

  Hello

  I don't see any problems either.

  The limit could come from the yubikey itself, cards may have a limit on the number of instances they allow by the applet. I already saw this, and this info is rarely available until you have problems and ask the provider of card/object.

  It seems not to be the case because "it works" without the transient table.

  There are some things you can try:

  1)

  Very often the buffer APDU itself can be used volatile buffer, without transitional additional.

  2)

  I try to use JCSystem.CLEAR_ON_DESELECT instead of JCSystem.CLEAR_ON_RESET.

  These may not be implemented, or maybe a bug. The difference is that all CLEAR_ON_DESELECT references are "stacked" for each instance, instead of reserve more memory for each instance.

  3)

  Even if you create more than one instance, the PAC file is loaded only once, same as a class in a real JVM, and each instance uses only memory to store references and objects of "instance". However, static fields are (obviously) only stored as a single, shared by all instances.

  It is possible to declare your 'static' transitional object and return only once, as you would for a singleton object, when the reference is found to be "null". This is possible because usually, instance that a cmdlet is alive at a given time, and this memory is a buffer of time anyway, so we don't care if it belongs to the class or instance.

  There is a catch though, as the reference to that object is bound to the class (package) and not to the instance. If this object reference is retained even if you delete all instances (and you will find it again once you re - create another instance). It will be only deleted when you delete the package.

  If this is a problem, the solution is explicitly to count the number of instances created: increment a static field in the constructor and it decrement in uninstall() reminder provided by the AppletEvent of JC 2.2.x interface.

• Question related to the requirement of since 11.1.1.5 uppercase variable names

  Hello
  
  I recently upgraded from 11.1.1.3 to 11.1.1.6 version of ODI.
  
  I had a few problems of running packages that worked on 11.1.1.3. I figured out it was the variable case question.
  
  I have a lot of procedures in my project, where I'm passing lower cased variable of command on the source of command on the target.
  
  For example
  
  Command on the target:
  
  OdiStartScen-SCEN_NAME = PACKAGE1-SCEN_VERSION =-1 - LOG_LEVEL = #log_level-GLOBAL. V_HOST = #host - GLOBAL. V_PORT = #port
  
  Command on the source:
  
  Select the host, port, log_level < % = odiRef.getObjectName ("TABLE") % >
  
  
  I tried to use double quotes, it didn't work. Then I wrote all the variables at the top of case (OdiStartScen-SCEN_NAME = PACKAGE1-SCEN_VERSION =-1 - LOG_LEVEL = #LOG_LEVEL-GLOBAL.) V_HOST = #HOST - GLOBAL. V_PORT = #PORT) and it worked.
  
  Now I have a big project on my hands, with a large number of procedures.
  
  Is there a solution to automate the process?
  
  Love, looking for a certain string (log_level, host...) in each of the control of each procedure throughout the project and replace it with the capital letter? Maybe the Jython script?
  
  It would save me a lot of time. Help, please.
  
  Thanks for you effort in advance!

  It was a bug (12971227) on 11.1.1.6.0 and there is a patch available to fix the problem. Please apply the patch that contains the fix for the bug 12971227 in your environment.

• Problem and question version of LabVIEW

  Hello world

  I want to install Labview 2012, I have Labview 2011 now and all of my programs, built in 2011, don't you think it is a problem when I install Labview 2012? all my programs are ex file. (I have licnese labview).

  I have another question regarding Ex file, I'm using PXie4330, 4353 and 6363, is possible to generate the executable file for them? as they run into the target?

  Thank you

  Hello

  As crossrulz said, you can install LabVIEW versions side by side. View 2011 and 2012 with is no problem (I have 2010, 2011 and 2012 all on the same machine). You mentioned that your programs are PMExport. I assume you mean that you have LabVIEW executable (.exe) written in LabVIEW 2011?

  Executables do not require the development environment to run, but they do not require LabVIEW runtime engine. For executables built in LabVIEW 2011, you will need the runtime LabVIEW 2011 (or the 2011 SP1 one). For screw written in 2011, you can open directly into the development environment 2012 and run them. Note that if you save the they will be now 2012 screws and Save for the previous Version , you will need to reopen them in 2011.

  Hope that helps,

  Jeff P

  Product Support Engineer

  LabVIEW R & D

  National Instruments

• Mix of traditional and interactive reports fails the process of RESETTING of PAGINATION.

  I have a tab page where I got 3 different reports REPORT_A (classic), REPORT_B (interactive) and REPORT_C (CLASSIC) in alphabetical order. I have a page to reset pagination process that will always draw (without condition) when you visit the page with the tab.

  
  Reset pagination process that exists in the front scene of the header is set to fire but not to reset the interactive report. It affects the subsequent classic report REPORT_C as well. The REPORT_A would be reset paging very well since it exists before the interactive report. Is this a bug in apex?

  I created an application of demonstration of test with specific steps to reproduce the problem. The steps are on the demo site itself.

  http://Apex.Oracle.com/pls/Apex/f?p=56638
  SUP: testuser
  P: password

  Apex Version: 4.2.4.00.08

  In my real application I wish a dropdownlist control on the page based on which I would like to filter the data. The dropdownlist control will have a corresponding branch of after-submit who will absolutely perfect pagination to reset & RIR. But when we visit Web site by tab the above problem would break the page.

  I tried the solutions like gReport.search ('SEARCH') but that will only set the interactive report, not the classic REPORT_C. It's just a hack anyway.

  Any ideas. ?

  Hello

  Create before that the process header on page 12 that calls APEX_UTIL. IR_RESET

  Kind regards
  Jari

• Updating from Home Premium to Ultimate... Questions related to the installation of SP1

  Hello

  I upgraded my system from Home Premium to Ultimate successfully by any time to upgrade. I have run the windows update and the updates installed. Now my Windows update says I have to install SP1...

  My windows update shows I need to install Windows vista service pack 1 kb936330 released 28/04/09

  I can goahead and install it? My hard drive does not support the function of bit locker and I already install the KB937287 , kb935509 kb938371 necessary updates and all other updates in windows update.

  If I install the SP1, I won't get the problem to enter the loop (stage 3 of 3 99% complete configuration) right. Coz, I already had this problem and reset my laptop to factory settings... Now I want to ensure, prior to SP1

  Last time I installed the SP1 from the following link and had the problem of configuration step 3 of 3 99% finished and restart loop

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  I hope that this is an old... Please let me know what are the precautions I need to take prior to the SP1 update... I don't want to see step configuring updates 3 of 3 99% finished and restart No. n times

  Thank you

  I upgraded my system from Home Premium to Ultimate successfully by any time to upgrade. I have run the windows update and the updates installed. Now my Windows update says I have to install SP1...

  My windows update shows Windows vista service pack 1 kb936330 released 28/04/09

  This I can goahead and install it?...

  Yes, you must install SP1... even just because SP1 is a sine qua non for the installation of SP2.

  It's okay which shows SP1 installed on 29 Apr-09: you haven't had not upgraded to Vista Ultimate then. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Vista Home Prem - problems since installation on 26 August updated - USB problems and everything deleted before the update restore points

  I have a Dell XPS 430 quad-processor. Receipt of the August 26 as update automatic updates. Since the computer was restarted after autoupdates, I have problems. Biggest problem is when I switch to another port my 4 ports KVM Trendnet TK - 407K and back on my Dell computer - the computer is blocked and the video is all garbled. My only recourse is to start the computer cold. After the first time it happened, I knew immediately updates, so I went in my restore points to restore back before the update. When I did restore bluescreened, but I was unable to capture data as computer restarted itself and get into the routine of starting fix. Difficulty of startup said it could not solve my problem.

  When I returned to restore to try to restore once again, I found that all my restore points have been removed. I found a utility called the shadow on the web Explorer and installed. He seems to find all my data restore point on the recovery D: drive, but Windows is not seeing them.  I should also mention, usb-wise, given that these updates have been applied, my Canon digital camera is not recognized when I hang it in one of the USB ports.

  Don't know what to do at this point. If I stay on the port on my computer using the KVM switch, my PC at home works well. Unfortunately, it is not realistic that I need to do my job in two laptops that are also connected to the switch.

  I'm tempted to just delete all the updates that have been installed on 8/26 to see if that helps - esp KB973879 I read on this patch causing a lot of problems with other computers.  Another thing that I have not tried is to use the restore from a command prompt application.

  Any suggestions would be greatly appreciated!

  Thank you!

  Hi brab61,

  Welcome to Microsoft Vista answers Forum!
   
  It is good to know that you're not faced problems with your computer.
   
  However, I suggest you go ahead and turn on Windows automatic updates to fix security vulnerabilities and it is beneficial for you to have these updates installed.
   
  Learn more about Windows Update, you can use the following link: -.
  http://www.Microsoft.com/Windows/downloads/windowsupdate/default.mspx
   
   
  You can run the System File Checker tool before you activate the automatic updates.
   
  To run the System File Checker tool, follow these steps:
  1. Click Start and type cmd in the box start the search.
  2 right click "cmd" in the list programs, and then click Run as administrator.
  3. you are asked to enter an administrator password or a confirmation, type your password or click on continue
  4. at the command prompt, type "sfc/scannow", and press ENTER.
   
  Note:- After that, you can now install an update both manually and check the update is causing the problem and let us know to help you and solve the problem.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope this information is useful.
   
  Let me know if it worked.
  All the best!
   
  Thank you, and in what concerns:
  Divya R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is tcauto.exe have encured a problem and needs to close the average? It happned so I was trying to install the tax program h@r Block

  isn't tcauto.exe incurred has a problem and needs to close to average. It happened while I was trying to install the H@r Block tax software

  1. Insert the software CD into the CD drive.
  2. Right click on the desktop icon and select Explorer.
  3. Click the CD-ROM drive.
  4. Choose the file HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe (where XX is the year of the product), and then choose copy.
     The name of the file should State + or + E-file in the name.
  5. Close Windows Explorer.
  6. Right click on the desktop and then click Paste.
  7. Double-click the HRBlock_Premium_20XX_CD.exe or TaxCut_Premium_20XX_CD.exe file (where XX is the year of the product) file.
  8. Follow the instructions in configuration of installation

  http://www.TaxCut.com/customer_support/supportarticle.jsp?type=article&FAQ=0&acid=158&PFID=1&TID=4&STid=10&CID=40&aid=4474§ion=before

• Question related to the activation of remote desktop

  Hello...

  I have a slight problem. In order to enable remote desktop in Windows 7, I have to system properties and then chose the remote adjustment.

  From here on, I will need to select Allow Remote Desktop connection and select users, if I want to.

  However, I am not able to have the option; Take a look at the screenshot below and I hope you understand what I mean.

  

  Hello

  It is possible that you do not see the options in the properties system due to the fact that Windows Remote Desktop has been turned off.

  Please press the Windows key + R, type services.msc and press ENTER. Navigate to the following below, double-click on them and make sure that the startup type is Manual:

  Remote Desktop Services UserMode Port Redirector

  Remote Desktop services

  Configuration of remote desktop

  Thank you

  Legaede

• Question related to the upgrade to Windows 8.1

  I currently have a HP laptop with 4 GB of Ram and 64-bit Windows 7 SR1 running. I'll give this computer to my wife, that his old bridge is going Tango-uniform (UT). I bought a new Lenovo SmartCheck S535 with 6 GB Ram 1 TB of storage. It came with Windows 7 SR1 already on board and he also included disks for Windows 8.1. First of all, I did a set of boot rescue disks and start them on the side.

  But now, I have a question, do I have to transfer my files from HP to Lenovo so that both use Windows 7 SR1? Or. should I go ahead and upgrade the OS and transfer the files.

  I'm sure that happens with a lot of people, there will be a lot of programs that I keep less re - install on the new computer. They are trash who are picked up along the way for those of us who use or service of computers as often we brush our teeth. Oops... maybe it's not such a great comparison, but you get what I mean!

  So, I would be very interested to hear your advice, your success, Yes and even a failure or two, all for the purpose of education.

  Thank you and I look forward to hearing from some of you.

  SteveG

  Original title: which came first - the chicken or the egg? (So to speak!)

  As a system dual boot, the only place where the 2 operating systems interact is the bootstrapper. Windows 8 will take the priority, is somewhat different, as far as it goes, and if you select then Windows 7 system reboots so it can do a little slower. Of course, there will be a loss of disk space but you are then also 2 installs of Office and everything else.

  If you were to go down the possibility to buy a kit Windows 8.1 you avoid the need to do a complete reinstall, because it will improve instead. You also avoid the need to run the upgrade of the store from 8 to 8.1. You must decide if the cost is justified, but in your situation, I would seriously consider that option as well.

  Even if I'm not a big fan of Windows 8 I made the full switch and are accustomed to him, I'm sure you will as well.