Memory RAM replacement hp compaq 6200 pro sff

Similar Questions

• Invalid electronic serial number after swapping out motherboard, HP Compaq 6200 Pro SFF

  Hello

  I have just replaced a motherboard under warranty and I try to find the utility to change S/N in the BIOS, have obtained a location for the equivalent laptop but can't find the PC version using a USB.

  I have CSN access, but cannot find the utility appropriate to effect the change.

  PC is:

  HP Compaq 6200 Pro SFF

  Any help would be appreciated.

  Thank you

  Darren

  [Personal information]

  Hello:

  Here's what you need to do... This model has no need to inventory number or serial number change utility...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• HP compaq 6200 pro sff: drivers missing

  good day to all,

  help with the following missing drivers.

  controller Ethernet (hardware id);

  PCI\VEN_8086 & Dev_1502 & SUBSYS_1497 / 03C & REV_04

  Pci\Ven_8086 & Dev_1502 & SUBSYS_1497103C

  Pci\Ven_8086 & Dev_1502 & CC_020000

  Pci\Ven_8086 & Dev_1502 & CC_0200

  In addition,

  PCI simple communication controller

  SM bus controller

  PCI serial port.

  The PC is HP compaq 6200 pro sff

  Windows 7 pro 64-bit.

  Thank you.

  Hello:

  You need these drivers...

  SMBus:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_88640_1 & swEnvOid = 4059

  Simple PCI and PCI Serial Port:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_138955_1 & swEnvOid = 4059

  Ethernet:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037910 & swItemId = vc_108131_1 & swEnvOid = 4059 #tab1

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• HP Compaq 6200 Pro SFF: Latch door stuck on 6200/6300 Pro SFF

  I don't know what my users to my machines, but I received (especially 6200/6300 Pro SFF) computers that I can't open the latch to release for the sidebar being stuck. When I pull the latch, the rear of the frame folds inward and the latch will not release. Someone has any advice on how to unlock these?

  The best answer I got from another forum is to shoot the main part of the case (pliers with tapered beak hanging in the locking ring got me the best results) while lifting simultaneously the release handle on the side panel. Not 100% effective, but he did unlock about 90% of my problem machines.

• 6200 pro sff: hp compaq 6200 pro sff was not able to start, but the fan will operate at excessive speed

  PC shuts off during the night. Haven't turned on this morning, white screen, no boot fan, cpu and power begins to operate at high speed after about 60 seconds. No beeps or flashing power light. Substituted know good power supply, same result. Removed RAM, no beeps from the bios of this.

  Hello

  Try to start without CPU.

  If the problem persists, no beeps, you will need to replace the system board.

  If it beeps (3) without CPU, you will need to replace the motherboard and test the CPU on another unit.

  Computer science is not an exact science , the most obvious is that it's only the system board but if you test the CPU you will be 100% safe.

  Concerning

• HP Compaq 6200 Pro SFF: Opgrade Windows 10 - HP Compaq 6200 Pro Small Form Factor PC

  Hello

  I want opgrade Windows 7 Pro (64 bit) to Windows 10 Pro (64-bit) with a clean install.

  I am aware that I have to choose the UEFI mode in the start menu, but do I

  enable/disable in the BIOS before I boot the installation DVD?

  Concerning

  Knud Erik

  Hello sfinksen ;
  
  Let me welcome you on the HP forums!
  
  I read your post about upgrading your PC to Win10 and wanted to help.
  
  First of all, you do not ask UEFI install Win10 Pro 64-bit.  I installed on a desktop computer using BIOS and MBR and it works very well.  You're not even sure that a Mini-PC offers the possibility of UEFI?

  Then, personally, I recommend the update.  The problem, that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 laptop driver.  HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

  To further complicate things, the GoBack to Win10 function has been proven to be unreliable, so when people are trying to return to an earlier OS when it does not work, cannot leave the machine in a damaged condition, such as only a full factory reset HP recovery support it will get back to a working condition , and not only you have to buy only media, you end up losing all your data, settings, and applications in the process.
  
  However, you can protect yourself from this kind of problems if, BEFORE you do that, you consider using a third-party application Imaging/restoration as Macrium Reflect to image your machine off, so you can easily restore it if something does not work.  And don't count on the Win10 GoBack function back on Win7, it is not reliable and can leave your computer in a damaged state.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  In addition, a clean install of Win10 lights only in the following circumstances:

  1) using build 10240 (RTM), an upgrade in previous place was done and confirmed have activated.

  (2) using the updated 10586 (November), a valid before the OS product key has been entered.

  So, if you have decided to do a clean install, you'd better using the MS Media (MCT) tool: Windows Installer by using the tool of creation of media - 10 Windows help

  With this tool, you have the option of (1) creation of installation of Win10 (USB or DVD) media, (2) download an ISO file, (3) update the PC directly.  If all you want to do is updated on this PC, then choose the option: upgrade this PC now.  This tool automatically selects the generation 10586 - giving you the opportunity to enter a product key to activate it.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Compaq 6200 pro sff: HP Compaq 6200 pro

  Hello

  My hard drive died last week so I tried to install a new Western Digital drive, but when I start the pc it shows the HP logo screen, then I get a blank screen with a corsor in the upper left (solid cursor does not blink). The pc does not go further.

  I'm sure that it is a bios issue but do not know what, any help would be appreciated.

  James

  Hello

  Did you check if all cables are connected firmly in their place and if the RAM is very savvy. It is possible that you dislodged something during the installation of the new HARD drive. Also, what model is the new HARD disk? How exactly does your previous PC is dead? Have you tried swapping SATA cables?

  Hope that helps.

• HP Compaq 6005 Pro SFF PC: RAM-I let crucial scan my system

  Crucial scan says I can use DDR3 PC3-14900 • CL = 13 • unbuffered NON - ECC DDR3-1866 • 1.35v • 512Meg x 64... My computer has DDR3 PC3-10600 (1333 MHz)... I thought I had to say with my ram support due to the mobo and cpu speed... SG972UC #ABA, HP Compaq 6005 Pro SFF PC...  I have the chance to buy faster ram if it will work. Thanks if you can help!

  The B97 is not listed on pg 2 illustrated parts Guide.

• HP Compaq 6000 Pro SFF: Help change the chassis.

  Nice day.

  I have a HP Compaq 6000 Pro SFF PC, I want to upgrade in a mini tower, is it possible with this PC? The reason is because I want to install a new GFX card and a cooling system for best performance, however, @ 240 PSU will be not reduced, especially not when I already 2 SATA drives. Can someone tell me please on what to do? Thanks in advance.

  PS: My PC is already out of warranty 3 months ago. If I can do pretty much anything I want with it without breach of the warranty.

  Specifications of the PC:

  HP Compaq 6000 Pro SFF

  Intel Core 2 Duo E7500 2.93 Ghz

  1 x DDR3 2 G of Ram

  2 x SATA hard drives

  1 x DVD player

  Windows 7 SP1 (32-bit)

  1 x PCI-E slot? (I do not currently know what type of housing is)

  POWER SUPPLY 240

  The motherboard so that the PC is listed as a BTX.  The typical motherboard is ATX.  HERE IS a PAGE that gives information of the two styles differences.  What I see, the BTX is built around designs of air traffic, so be careful.

• HP Compaq 6005 Pro SFF PC: use reference dell 531 parts s in my PC HP Compaq 6005 Pro SFF

  I try and speed up my computer, I have a computer dell 531 s this works (vista). Hard drive crashed. I was hopeing I could use something out of it. This is for my HP Compaq 6005 Pro SFF PC, SG972UC #ABA... Thank you... Mike

  Hello:

  Compare the specifications of the two models, it seems that the only thing you can use the hard drive, what said you was not good, so it does not work.

  The 6005 Pro uses different memory (DDR3) and 531's DDR2, which does not in a DDR3 slot.

  The 6005 uses another set of AMD processors and that of your 531 s will not work in the 6005 Pro.

• HP Compaq 6200 Pro MT PC: Error number SN

  Hello.

  I just replaced a motherboard on an HP PC Compaq 6200 Pro MT.

  The issue is that, once replaced it get an error "invalid electronic serial number".

  I tried the game that in the BIOS, but there is no other choice.

  I am aware that there is a DMI tool for laptop to set these parameters, is there one for the PC?

  Concerning

  Tyzer

  Engineer of the ASP.

  Hi, Tyzer:

  See if it works...

  After entering the Setup by pressing the F10 key, press on Ctrl + A to open additional fields in the security > system menu IDs.

  Enter the serial number of your PC inventory and serial number of chassis number.

  Save the changes then and once when you exit the BIOS.

  Paul

• HP Compaq 6005 Pro SFF PC, a student protected Bios password

  Hi all

  I have a HP Compaq 6005 Pro SFF PC who was in a classroom and a student a BIOS password unfortunately we don't know who or when I need to be able to access the boot order on this machine to reimage the reader for the deployment of windows 7 new...

  The machine is only 3 months old and if I can't get in, it will be placed in a cell from useless in its current state...

  Is there a tool or a technique for the password reset bios. Remove the battery didn't solve it!

  I have 3 computers HP laptop 6730 b former officials went with BIOS password on them I have to be able to reset these that I googled for the resolution and the answer seems to be to replace the motherboard, which is not really an option because of the prohibitive costs.

  Is there a recovery tool or tip or trick to do this?

• HP Compaq 6200 Pro small format: Re-install the network adapter

  Dear assistants & members,

  Yesterday, I tried to download a 64-bit system that has not worked and had trouble.

  I am trying to connect to the internet, but it still says: a network adapter was not found (something like that)

  I have seen a lot of messages so I already do my hardware ID:

  PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C & REV_04

  PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C

  PCI\VEN_8086 & DEV_1502 & CC_020000

  PCI\VEN_8086 & DEV_1502 & CC_0200

  I hope you self-introduction can help out me.

  I'm computer: HP Compaq 6200 Pro Small Form Factor

  Hello:

  Try the driver directly from Intel.  The hardware ID you posted is for an Intel ethernet card.

  The first file listed is for W7 32 bit.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-

  I was going to ask...

  How did you couldn't get W7 x 64 install?

  I have an Elite 8200, which is the same model as yours, except that it's a chipset series 6 Intel a little better than you do.

  I had no problem installing W7 x 64 on it.

• HP Compaq 6200 Pro small-format: How can I tell how old my computer is by serial number

  I would like to know how old my computer with the help of its serial number.

  HP Compaq 6200 Pro Small Form Factor PC

  Serial number: [personal information]

  I hope someone can tell me when my model was in production and sometimes identify the date that your machine was completed.

  Thanks in advance.

  Best,

  Renata

  Rena.

  Your computer was born.

  Week 07

  February 13, 2012

  19 February 2012

  Year 2012 week 07

  REO