Memory slot problem

Similar Questions

• Tecra 8100: memory slot problems

  I have a model tecra 8100 not: PT810L 12 c 42.

  I had problem with slot B mem, so collapsed to use it. Then I upgraded my RAM and inserted a 128 Mb TOSHIBA THLY6416G1FG-80 RAM PC100-222-620 slot A and used for a month. Then he suddenly went dead one day and did not boot at all.

  I took it to the point of service, they found somehow it work by sticking a piece of paper btw Aries and the cover. I used another week with ram cover duck taped it. Same story, then dead in the middle of winXP, switched off and no boot again. It took to the same service point, they tried some other RAM chipsets that it refused to start.

  The interesting thing is; When they inserted a faulty RAM in slot A and non-use slot B we get the message "memory incompatible chipset" on the screen. With the RAM mentioned above in the slot B (problem as always) and the A we get nothing, just a blank screen, DVD slot starts green lit, but nothing.

  WHAT SHOULD I DO, PLS HELP

  What is the RAM causing problems? What must a chipset that is exactly compatible with the model no pls?
  Is it the two locations of memory A or B, their change could solve the problem?

  This is the machine he itself, must it be thrown away?

  ANY SUGGESTIONS PLEASE

  Hello

  I n know where you tried to upgrade the memory but as Lisa suggested this was not a serious technician. I changed and upgraded memory on multiple PCs, and you must use 100% compatible modules! You shouldn't t install the modules with a brute force or use strange things as a communication between the housing and the memory module.
  Possible slots are damage due to use this procedure. But I hope you're a lucky man and everything will work correctly.

  If you n t know which modules are right and taken in charge so you should contact the service partner authorized Toshiba for the right and the upgrade modules.

  Good luck

• Satellite Pro L300 - second defective memory Slot?

  Hi, I'm trying to install 4 GB of memory in a laptop Satellite Pro L300. This kind of thing, I did a thousand times before.

  However, every time I install a module of memory in the second memory slot, the laptop will be a blue screen when windows is loaded. Even running memtest (via bootable cd) will result in a block, so it is not for lack of Windows.

  I have the latest version of the BIOS installed (1.50)

  Each module of memory works perfectly in the main location on its own.

  With the help of a single module of memory in the memory secondary slot (even the original 1 GB module) translates the laptop does not even start.

  Is this a known issue? Or is it just a second faulty slot?

  Thank you very much!

  Maybe it's a non compatible memory module.

  What model of laptop you have exactly (L300-xxx)?
  What extra RAM you bought?
  Have you checked the compatibility?

  To be honest on this forum you will find many forums where people have described the same problem after upgrade. Most of these problems described was linked to the use of markets and not compatible good RAM modules.

• G7-2235dx - memory Slot defective/made not climb in memory Slot

  Recently I bought a package of 4 GB of DDR3 1600 PC3 12800 for my laptop. I received it today and progressed to install after the direcitons given to the user of my laptop manual. But never well switched memory. It seems that the retention clips are not long enough, or there is something blocking the module to go fully into the slot of memory. I found that odd. After finding out that memory does not fit in the slot, I removed the HP factory memory module, it is the crack and tried to put it in the slot of the replacement part or defective. Also, there is no good. Just for clarification, I tested the memory purchased in the slot of the workign and memory works perfectly. I wonder what could be the problem with my memory slot.
  
  I called HP support and they said it would cost me $290 for the slot to be repaired. I find it a lot since I paid $300 for the laptop itself.
  
  Any help is apprechiated.

  A motherboard itself is going to be at least $ 125. There is work. Of course, it does not. I put 4 gigs in it in the a good slot and just use it.

• memory slot does not

  Hello everyone, hope everything goes well. I thought that I would try to help pertaining to my RESUME. I have a DV6 and became the error code 3 blink of my lock I did some autour research and saw that this Signals an error in module memory, so I started working on possible questions. I tried to replace the two modules, and also to buy new modules in total, having still kept the error. I saw someone on here earlier having the same problem and was told to try to launch it with the memory module that one up for test slots and here is, it worked.

  Now my question for everyone is what I can do to try to get the memory slot to work again, or is it possible to replace? Really appreciate all the advice, a good night

  Hello

  You have tried many things and it does not show up, could be physically damage. You cannot replace the RAM slot only, must be a whole mother/system board. Is the machine still under warranty? If this is not the case, my suggestion keep your machine running with 1 slot and save the money to buy the new machine. If you really want to change the mother/system map, please check the following lins:

  http://h20141.www2.HP.com/hpparts/?cc=us&lang=en&JumpID=hpr_r1002_usen
     http://PartSurfer.HP.com/

  You can get the part # of the links above then eBay.

  Good luck.

  PS: 11:15 Friday our time now.

• Memory slot Equium M50-164 sites

  Hello

  I have the Equium M50-164 and I was wondering if the locations are intended to upgrade memory. I found one that at the bottom of the laptop and I can't find the location of the other.

  Anyone knows where the other?
  Thank you.

  Hello

  The laptop support certainly two memory slots and the two slots are extensible.
  From my own experience it possible s the second slot is hidden under the first memory module. If you could see the other location if the first module of memory would be removed.

  I hope that this is the case on the M50 model

  Welcome them

• Satellite L300-171 - defective memory slot

  Hello, Toshiba users!

  I am the proud owner of a laptop Toshiba Satellite L300-171, purchased last year.
  one of my memory locations stoped work 4 weeks ago.

  This model comes with 3 GB of DDR2 667 MHz RAM. Now it shows me only 2 GB.
  I swapped the modules between them (I thought that maybe the 1 GB module not working not) and I have 1 GB of memory. Thus, the two RAM modules work. It's the slot.

  You know any reason why this could happen during the night? (perhaps a CMOS setting or something).

  And is it true that memory slot can access 2 GB of memory?

  To see the specifications of this model to access to this
  http://EU.computers.Toshiba-Europe.com/innovation/product/satellite-L300-171/1056296/model/1056296/serie/150081/family/2326/x/50/y/14/type/2319/action/SHOW_ATTRIBUTES/#0

  I have the same operating system as it came with: Windows Vista Home Premium 32-bit

  Thank you very much for any answer

  > Do you know of any reason why this could happen during the night? (perhaps a CMOS setting or something).
  Each issue goes unexpectedly

  I have an old... my laptop is about 8 years old... The RAM slot died after 5 years of use I think the higher internal temperature might be one of the reasons why this slot could damage

  In my case, the laptop crashed. I removed a faulty slot RAM module and everything worked properly.
  The old RAM modules were 512 MB now I ve got a 1 GB of RAM in a housing and the second is empty

• Satellite 3000 - x 4: this model has how many memory slots?

  Hello

  I have a question on this model of Toshiba Satellite 3000 - x 4 PS301E - 000 K 8 - EN I took the chassis on this model today to do a repair for someone in my family work. When I took the VGA card, I discovered what looked like an another memory location.
  So my question is how many slots memory model there?

  I read online and I checked the profile page and they all point to this model with two memory locations.
  If this is the case then what is this thing that resembled a memory slot under the vga card?
  I had to buy another piece of RAM for this model today make three, but I decided on a little hand to check it out first.

  There are already two sticks of laptop memory already, 512 MB, and 128 MB. This model can take up to 1 GB.
  So, what do you think is there memory locations two or three on this model?

  Thank you

  Hello

  As far as I know, this unit has 2 memory slots and 1 slot for PC card for 2 Type II cards or 1 Type III card.
  Please also see this Toshiba product site:
  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=UK&ACTION=PRIN T_WITH_BACK & PRODUCT_ID = 15932 & DISC_MODEL = 0

• Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 has 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 have a 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

  You can put 2 x 4 GB DIMMS in the empty slots, this will give you a total of 12 GB. iMacs are very sensitive to the RAM, it is best to buy RAM from reliable sources like Crucial (direct purchase) or OWC OWC RAM

• Memory slot secondary satellite P30 145 unrecognized

  After a HARD recent failure disk format, I had to reinstall XP and downloaded the drivers Tosh not having does not have access to my original restore disk as I work abroad.

  The secondary memory slot is grateful now not any DDR, I'm moving to 2 G, any suggestions?

  Kind regards
  Eamonn

  Hello

  The second slot recognized different memory modules?
  You could definitely upgrade the memory on this laptop up to 2 GB!
  If a single location must be able to recognize a 1024MB module.

  I suggest you first check the compatibility with the module because there might be a malfunction of the motherboard (slot), or you try to use the module is not compatible.
  You have to eliminate a!

  To my knowledge, this laptop supports PC2700 DDR - RAM and 1024MB (PA3313U-1M1G) module should work!

• External memory slot

  All the information I read on the external memory slot refers to "microSD" type of memory. The slot is compatible with the type of memory more advanced 'microSDHC', please?

  naptonian

  I use a 16 GB Kingston microSDHC card, and it works correctly.

• HP laptop laptop 15-r132wm: 15-r132wm memory slots available

  Can someone tell me how many memory slots and HARD drive locations there is on the 15-r132wm?  I constantly searched and can't find a definitive answer.  I don't want to go digging inside my laptop, if there is no additional storage/memory space available.

  Thank you very much!

  DJ PlaZma

  Hello

  Yes from the book

  Kind regards.

• Memory Allocation problem when using JNI

  For a project, we need to interface Labwindows CVI / Teststand with an application written in Java. We use JNI. The code uses JNI_CreateJavaVM to start a JAVA virtual machine to run the Java interface code. The code did run for quite awhile, but now (without any obvious changes on the side of the CVI or on the coast of Java) JNI_CreateJavaVM will fail with the error-4 code, this means that of the JAVA virtual machine failed to start due to the failure of allocation memory. First investigation shows that even if the Windows Task Manager shows approximately 600 M free physical memory, you can allocate in ICB only about 250 M as a single block at the point where we call JNI_CreateJavaVM. Maybe it's a little less because we have - Xmx192m to the JAVA virtual machine to run our code. Unfortunately just to increase the physical memory of the machine of 1.5 G to 2G doesn't change anything. Free memory space in the Task Manager showed increases, but the memory total block size does not work. Are the trick to optimize the CVI/Teststand who use cases?  Or maybe the problems with JNI?

  Finally, it was a memory fragmentation problem with TestStand. See details/solution here

• Office Tower Inspiron 530, where is the memory slot?

  where is the memory slot?

  Do you mean the connector for installing more RAM (computer case): http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/parts.htm#wp1580857 depending on what variety of Inspiron 530 you have, you can have 4 connectors (items 3, 4, 5, 6, & in this image) or only 2 (points 3 and 4 in this picture)

  Or a player where you insert devices such as card SD cards? http://support.Dell.com/support/eDOCS/systems/inspd530/en/OM/HTML/settin58.jpg

• Where are the memory slots on the HP Elitebook 8440p?

  Hello, I have a HP EliteBook 8440p, with serial number: {deleted personal information} and the product number: SK119UC #ABA

  I have 2 memory slots. 2x2gb for a total of 4 GB of system memory. I found one of the memory slots on the bottom of the laptop (there was a small picture of a ramstick). I would like to find another, but I don't know where he is, so I ask help on localization. It is the laptop that I have, I believe. http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02030597&prodSeriesId=409587...

  And so the max RAM I can reach is 8GB and I would like to replace the current ramsticks with a 2 x 4 GB for a total of 8GB.

  Please and thank you!

  Hello:

  The other location memory is under the keyboard.

  Please read the service manual for the instructions on how to remove and replace the module from the main memory.

  Chapter 4, starting on page 4-18.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c02745864/c02745864.PDF