Memory Stick does not load

I can't get my memory card to read. When I put it in the computer, the green light turns on but nothing else happens. I tried the fix auto Wizard and it didn't work. My card is from a camera.

Click Start, run, type diskmgmt.msc and press ENTER. The map appears here? If it appears, but no drive letter (or has a double letter) assigned to it, right click on the header, and assign one that is not already in use.

SC Tom
-There is no such thing as TMI if you request technical support.

Tags: Windows

Similar Questions

  • Memory stick does not work when insalled in plugin usb

    I bought a memory stick attached, it keeps raising no malfunction of the driver software

    A memory stick should not require some special drivers run they run on inbox drivers. If the drivers that came with Windows itself lack so none of the memory key usb will work.

    If you have a different memory stick try to plug into this computer and check if it works.

    If you have access to another computer test plug this memory stick to another computer and check if it works.

    On the computer that has a problem try equipped with a utility spell system "sfc file analysis".

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista

    In addition to this, you can try the steps of troubleshooting on this link: http://www.kingston.com/support/usbflashdrives/faq/pcdt_20.asp

  • My PSP Memory Stick does not work!

    After the release of back in my PSP version 6.60 I took out the memory stick, now I put it and it does not read! my PC detects the PSp but not the Memory Stick... Formatting is not an option either, because I can not lose what I have out there! But even if I could, it's not detected...

    Now the formatting isn't an option, other forums say it could be a stick memory corrupt, everything went wrong over time...

    Another said it could be the motherboard or WiFi... Now I fall quite frequently (about 1 to 3 times per month)... I don't know if that would be or could dislodge the contacts or the welds on the boards...
    everything works perfectly fine, but just, it does not detect the card.
    The other thing I did was download monsters in Pixel Junk demo right after I have connected to the internet for the first time...
    I tried to download the demo for LittleBigPlanet, but he went for about 5 minutes for the calculation of the time for the download, there finally went up until going to the 1077 minutes before I canceled it. and when I tried it delayed by about one minute with circular loading lower-right sign. He then returned to the Playstation store. After that, I tried to play the game, but to activate the system in order to. I did and when I returned to play, he could not detect the stick.
    I've tried everything except formatting to the >http://www.dcemu.co.uk/vbulletin/threads/78420-no-memory-stick-inserted! / page2? s = 297f1e58992671fbb65f8657671d50d3< nothing="" really="" works...="" i'm="" thinking="" it="" could="" be="" a="" factory="" error,="" or="" maybe="" my="" error="" singe="" the="" stick="" had="" about="" 80mb="" of="" space="" after="" i="" deleted="" the="" update="" installation="" package.="">
    Someone said I just need a card reader to copy on another stick and I'll be fine with the new stick...
    Or just take a shop because it's a simple solution...
    Please help me... I am sad without him :'()

    Hello

    I suggest you try to insert the new memory card and check if it works.

  • Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

    Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery, if/before you reinstall:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • After the reinstallation of Windows 7, it does not load and restarts continuously

    I recently formatted and reinstalled Windows 7 on my Sony Vaio PCG - 71913L LAPTOP however the operating system does not load and his bicycle at all times. From the time turned the first page initialization comes then it stops and restarts and continues to go through this cycle. Is there a soloution to this question

    Check your BIOS settings. Have you installed the drivers of Sony devices?

    Test your hard drive and memory.

    First run Memtest86 +:
    It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
    sticks are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no error then your RAM is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Hard drive test:
    If you do not know your readers of the brand and model, try "Speccy",.
    It provides information from the computer/system in detail:
    OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
    Note: Option RAM indicates number of slots, DRAM Timing.
    Works your memory speed (frequency). The nominal frequency of your memory.
    http://www.Piriform.com/Speccy

    Test your player - create a Bootable CD:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
    Test your drive with the car manufacture utility.
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
    (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    Sony product support: http://esupport.sony.com/US/perl/contact-land.pl?mdltype_id=1, 72,70,24,66,9,26,5

    Sony device drivers: http://eSupport.Sony.com/en/VAIO

    Enter your model number or leave Sony scan and detect your model.

    If you have Windows 7 drivers then download to a folder on your hard drive and install all of them, starting with the mother/chipset, SATA, Firewire card drivers (1394), LAN, Audio, etc, and so on.

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    For help to install windows 7 on your VAIO, you can contact the support team Vaio 1-888-476-6972 they will be more than happy to try to help.

    J W Stuart: http://www.pagestart.com

  • Google Reader does not load

    Hello

    Since upgrading to Firefox 36.0.1 () and Google Reader does not load correctly. While I can access the page from disk, the color wheel that google appears as apps load just continues to run. I tried on Chrome and it loads fine. I also tried to open Firefox in Mode safe with extensions/add-ons disabled, as well as to empty cache memory. I have not yet tried the Firefox update, but I did not have any settings beyond the Add-ons that should interfere.

    Has anyone encountered this problem? Any suggestions would be very helpful.

    Thank you!

    Thank you! I just tried, and it did not help. However, I decided to do a "refresh" of firefox, and now it works. I'll follow careful of my modules and see if it happens again.

    Thank you!

  • 9.1.1 Safari on OS 10.11.5 - Safari does not load some plugins at least 2 Web sites. a site wordpress - home-slideshow page does not - rapidweaver site - plug-ins glitch - works perfectly on Chrome

    Mac Pro mid 2012 - 3.33 Ghz 6 - core Intel Xeon processor - memory 20 Gb 1333 MHz DDR3 ECC - graph ARI Radeon HD 5870 1024 MB - just upgraded to El Capitan 1 day ago - glitch - had a little Mail quits unexpectedly about 4 times - Finder also has quit unexpectedly.

    Have no problems with Safari 9.1.1 until yesterday.  Checked on 3 computers-, each site has had the same result.

    The two sites are mine.

    Sellsedona.com - wordpress site does not load the home page slideshow.  and the positions of the dashboard section does not load correctly. spinning wheel of death on some of the plugins.

    Sperryr.com is a stub of rapidweaver 5 - Update - site plug-ins work on it either.

    Google Chrome works perfectly, but I am a Safari user.  Help, please.

    Hello

    Safe Mode boot removes the system caches that can help after upgrading to a new OS X.

    Follow these steps to start in safe mode.

    1. Start or restart your Mac.
    2. As soon as you hear the startup tone, hold down the SHIFT key.
    3. Release the SHIFT key when you see the logo Apple appears on the screen.

    After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

    To leave safe mode, restart your computer without pressing any keys during startup.

    Then try Safari. I hope that the Finder cannot quit unexpectedly or the other.

  • The last tab, further to the right, does not load when you restart FireFox.

    Whenever I restart firefox, the last tab that I had opened does not load. The issue of restarting can be any: add new installed firefox, new update, restart the browser manually, or restart my computer for firefox automatically closes. It's always the same problem. The last tab appears, as my page, new tab, which is empty. I have 3 tabs open and the first 2 will load fine, but not the last. This means that if I restart for an add-on or something, I need to return to my story to go back the last tab, which is annoying. And it may not have been my most recent tab. I can open this last tab, go back to the tab previous surfing the web on this subject, my story of the building and then restart firefox for some reason any. In these cases, I need to open the history window and dig for the last tab of the memory.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the start safe mode window or make changes.
  • Oblivion does not load on windows 7 Home premium 64-bit

    My game of the year oblivion edition does not load.  "I get a" problem with oblivion caused oblivion to close ' and 2 small black windows.  I tried to run it in Administrator as suggested by bethseda and compatibility mode.  I have an old three week computer has an Intel i7-860 2.8 GHz, 8 GB memory sdram ddr3 1333 mhz processor, with 1 GB ati radeon hd 4850 graphics card its integrated 7.1 which seems to meet the system requirements to run the game but the game won't load always.   Microsoft says that it is compatible with windows 7 so what causes this problem.

    You must also download the latest DirectX.

  • Why Safary does not load the content of pages?

    Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.

    Sorry if my English is not good, I am a Brazilian who is still learning English

    Your English is very good!

    Redirects are usually due to adware or malware.

    Download the run MalwareBytes.

    It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.

  • Updated my iPhone6 to ios10 and now my battery heats up and does not load

    Updated my iPhone6 to ios10 and now my battery heats up and does not load

    I have never experienced this with another iPhone or iOS version

    Of course, it's a problem because I use my phone all day

    What troubleshooting steps have been taken so far?

    Have you completed a reboot, reset or restore such as recommended by Apple?

    Best,

    GDG

  • My charger Apple Watch emits a ticking sound and does not load?

    The round magnetic disc at the end of my charging cable is a "ticking" or clicking sound which seems to be the rhythm of a clock. He has recently begun and did not charge the watch. I tried to connect the cable to the USB port on the MacBook Pro rather than on the wall, but still, he clicks on and does not load. Is my favorite charger?

    Hello

    I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation in one goal of your Apple Watch and cable magnetic charge verified and, if recommended by Apple, repaired / replaced (whether under warranty, if it qualifies, or via the chargeable repair service):

    To check your warranty status (the serial number is on the back of your watch):

  • Safari for Mac OS does not load certain pages

    After upgrading to Mac OS on my Mac Mini (end of 2011), everything seems to work properly. I rebooted the Mini just to be on the safe side. Everything went well. It was Tuesday night.

    Thursday morning, the first opportunity, I get to mess with it, I opened Safari, try to connect to my router Asus RT-N66U (with the latest firmware), but somehow Safari doesn't seem to like https, nor does it like .asp pages. Here is a screenshot of what's on my Mac Mini Safari:

    I then decided to download Google Chrome. I installed (never had on this Mac Mini), but the page works perfectly and quickly.

    I have reset everything I could on Safari, including clear them cache, clear history, tried the developer mode (no matter WHICH mode in there still gives the same results)... on the cable connections and wireless. Chrome works without a hitch, as Safari before Tuesday. Now, nothing...

    ... However some pages such as Google.com or Apple.com loading properly. I haven't checked if there are applets missing in the back or a dark rendering problem.

    Any ideas how to solve this problem? (I'll use Chrome until it is.)

    Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

    Safari does not load a page or webpage elements are missing

    Safari / other browsers - Web site does not

  • Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

    Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

    You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

    It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

    Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

    If you want to make Apple know how you feel, you can leave your comments via this form

    http://www.Apple.com/feedback/

  • iMovie does not load...

    iMovie 10.1.1 gets stuck and does not load.  I have to force it to quit.  It seems trying to load an old movie I don't want to change.  How can I prevent this from happening so he could load with a clean slate?

    Hold the SHIFT key when you launch the app.

Maybe you are looking for