Memory stick is not recognized bySatellite one


I m quite a novice to the problem I have is that the laptop won t recognize any memory sticks when a scan has been made, he said that there was a lack or outside date driver but I don't know which

If someone has experienced this problem and is at - it an easy way to fix it?

Thanks in advance.

If you want to discuss these problems you must provide some basic information such as the model of laptop and operating system preinstalled.
Can you please tell us what memory card do you use?

Memory card reader installed and listed correctly in the Device Manager?

Tags: Toshiba

Similar Questions

  • Problem: Memory PCI Flash not recognized on Satellite M30X


    Windows XP does not recognize my multicard reader. That he has still put memory PCI Flash not recognized (2 locations)

    I tried - uninstall the driver (and the camera) and reboot: does not work
    -install the cardbus driver: does not work either

    Have any hint?


    PS: Sorry for my bad English, I'm French ;)


    Are you sure that the card is compatible with your laptop?
    As far as I know the card on the left site reader who, only available on some models, allows you to insert and read data from the SD card, smart media (SMM) MemoryStick pro, Multimedia card and XD picture cards.

    The PC card slot supports cards PCMCIA Type II


    Dear Sir

    I use the 64 GB memory card in my samsung II Galaxy note, card memory sunddenly is not recognized by mobile and it was showing audit errors, other card memory running in my laptop. Help, please.

    Hola, BAVAJI

    Dear user
    Como otras memoria tarjetas is ejecutan en su celular, it check that el mismo acepta las nuevas tarjetas of 64 GB SDXC (extended capacity) son. Telefono VEA is if el este logo, o el manual.
    Means Quebec 4 32 GB SDHC (from alta capacidad) son.
    Asumiendo knew movil, if tiene el logo SDXC, entonces all lo siguiente:
    1- Por favor, in primer lugar, clean los pines of the tarjeta con alcohol isopropilico (o comun). Luego, see if works.
    - 2if no es asi, seguimos: apply the SDXC card in a laptop (o mas), directly known puerto, con a good useful (no UN lector tarjetas, ojo).
    3- Hacer copia of seguridad del contenido, y guardarlo in otro lugar.
    4- el icono of the tarjeta, haga click con el boton derecho del raton, y luego / Propiedades / Herramientas / Comprobacion errores.

    Saludos, Alfred.


    Hi, BAVAJI

    Dear user

    As other cards of memory running on your mobile phone, check that the same accept new 64 GB cards, which are the SDXC (Extended Capacity). See if the phone has this logo, or in the manual.
    Don't forget that the 4 GB to 32 GB are SDHC (high capacity).
    Assuming that your cell phone, if the SDXC logo, then we will:

    1- please, first of all, clean the pins on the card with isopropyl alcohol (or common). Then see if it works.

    2- if not, we continue: place SDXC card in a laptop (or more), directly to its port, with a good adapter (NOT a card reader, an eye).

    3- make the backup content, then save it somewhere else.

    4- in the map icon, click on by the right button of the mouse, then use / properties / tools / error checking.


    Sincerely, Alfred.        (Google translation).

  • Memory stick does not work when insalled in plugin usb

    I bought a memory stick attached, it keeps raising no malfunction of the driver software

    A memory stick should not require some special drivers run they run on inbox drivers. If the drivers that came with Windows itself lack so none of the memory key usb will work.

    If you have a different memory stick try to plug into this computer and check if it works.

    If you have access to another computer test plug this memory stick to another computer and check if it works.

    On the computer that has a problem try equipped with a utility spell system "sfc file analysis".

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista

    In addition to this, you can try the steps of troubleshooting on this link:

  • My PSP Memory Stick does not work!

    After the release of back in my PSP version 6.60 I took out the memory stick, now I put it and it does not read! my PC detects the PSp but not the Memory Stick... Formatting is not an option either, because I can not lose what I have out there! But even if I could, it's not detected...

    Now the formatting isn't an option, other forums say it could be a stick memory corrupt, everything went wrong over time...

    Another said it could be the motherboard or WiFi... Now I fall quite frequently (about 1 to 3 times per month)... I don't know if that would be or could dislodge the contacts or the welds on the boards...
    everything works perfectly fine, but just, it does not detect the card.
    The other thing I did was download monsters in Pixel Junk demo right after I have connected to the internet for the first time...
    I tried to download the demo for LittleBigPlanet, but he went for about 5 minutes for the calculation of the time for the download, there finally went up until going to the 1077 minutes before I canceled it. and when I tried it delayed by about one minute with circular loading lower-right sign. He then returned to the Playstation store. After that, I tried to play the game, but to activate the system in order to. I did and when I returned to play, he could not detect the stick.
    I've tried everything except formatting to the >! / page2? s = 297f1e58992671fbb65f8657671d50d3< nothing="" really="" works...="" i'm="" thinking="" it="" could="" be="" a="" factory="" error,="" or="" maybe="" my="" error="" singe="" the="" stick="" had="" about="" 80mb="" of="" space="" after="" i="" deleted="" the="" update="" installation="" package.="">
    Someone said I just need a card reader to copy on another stick and I'll be fine with the new stick...
    Or just take a shop because it's a simple solution...
    Please help me... I am sad without him :'()


    I suggest you try to insert the new memory card and check if it works.

  • Any update yet to USB sticks being not recognized?

    I searched for help and found similar problems have yet to see any real solution.  Seems that many face the same problem with key USB cannot be recognized on Windows 7

    Is there any solution yet?  I'm not computer whizzkid so if there is a REAL difficulty (not something dubious Regedit that sounded like he screwed up computers everybodys!) please let me know how to do - it is so frustrating!

    See you soon


    Have you checked the player on other computers running Windows 7, Vista or XP?

    Be sure to check forums and with Support of the manufacturer of the Drive, their documentation online.

    It is SanDisk however, these methods can help with other brands of USB keys.

    Cruzer not recognized by the PC


    Check with manufacturer's support the system, their drivers and documentation online and ask for their
    Forums (if any) for known issues. Search for updates of BIOS, chipset of low-level drivers and others
    USB drivers on the site of the manufacturer of the system (motherboard for systems custom built manufacturer).

    If a PC remove ALL power and reinstallation of the cards, memory and cables (at both ends where possible)
    -in fact, remove and replace - do not just tight. Remove the dust bunnies and make sure that the ventilation openings
    are clear. For a laptop on everything that can be done is to reinstall the memory and clear the vents.

    If nothing works and it's a PC, you can disable the onboard USB and use a USB add-in card
    is not expensive. Of course for a PC or laptop using a real computer store (one who does in)
    Home service) or system manufacturer support can be requested.


    Other troubleshooting methods:

    1 reboot to be sure nothing blocks the ports.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN


    How to fix the system files of Windows 7 with the System File Checker

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7


    Then lets refresh the USB stack

    Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

    Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
    plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
    for all instances

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer.
    as well as all USB devices that you previously used. Run Options and tick the three 1st choice
    to see if one is there. Try to remove all instances and restart then plug the drive.


    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit

    Hardware devices not detected or not working - Mr. Fixit

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Memory Stick does not load

    I can't get my memory card to read. When I put it in the computer, the green light turns on but nothing else happens. I tried the fix auto Wizard and it didn't work. My card is from a camera.

    Click Start, run, type diskmgmt.msc and press ENTER. The map appears here? If it appears, but no drive letter (or has a double letter) assigned to it, right click on the header, and assign one that is not already in use.

    SC Tom
    -There is no such thing as TMI if you request technical support.

  • SD memory cards are not recognized on satellite A200


    I had a Satellite A200 installed with Vista.
    When I insert the SD card into the laptop, nothing happens. My SD card does not seem to be recognized by the system.
    I tried to different maps, but none of them have been recognized.
    SD host controller is listed correctly in the Device Manager.
    I don't know what happened, but there is no problem with SD cards before you recognize.

    Thanks in advance!

    Hi there, my suggestion would be first uninstall and then reinstall the drivers from your SD controller (available for your laptop model on your regional site of Toshiba drivers). If this does not resolve the problem, then visit the following link to download an update to enable playback of higher capacity SD cards under Windows Vista: if this fails, then make sure that you are upgraded to Service Pack 1 of Windows Vista.

    I hope this helps

  • SD memory card is not recognized in Windows Explorer on Portege

    When I insert my memory card SD into the slot of the card reader, the computer recognizes it is inserted as a material but does it assign a drive in Explorer. So I can't access the files on the card. Any ideas?

    First question: what computer Portégé laptop are you using?
    Second question: have you checked if the size of the SD card is compatible and supported?

  • How to use a memmory stick to get photos from one computer to another

    I have an old computer with a lot of pictures on and I would like to put them on this computer I can do this with a memmory stick If Yes, how I'm new to computers so I need it to be simple

    I have an old computer with a lot of pictures on and I would like to put them on this computer I can do this with a memmory stick If Yes, how I'm new to computers so I need it to be simple

    Yes, you can very easily. Connect the memory stick on the old computer. Now copy the files of the rto to compute the memory stick. You can do this in several ways, but the easiest is to copy - paste and drag-and - drop. (If you don't know how to do those, post back for more information).

    Once the files on the memory stick, remove it from the old computer and plug it into a new one. Do copy-and - paste or drag-and - drop from the memory stick to the new computer.

    Also, note that it is possible that your memory stick is not big enough for all the photos, so you may need to do this in several batches.

  • 4GB SD card not recognized


    I ordered the Intex Cloud FX phone which is only available in India powered Firefox smartphone.
    I inserted a micro SD 8 GB card which works perfectly on other phones, but not on the Intex Cloud FX phone.

    The memory card is not recognized at all. Here are the specs:
    Brand - Intex
    FX Cloud - model
    Made in people's Republic of CHINA

    Memory card:
    Brand - SanDisk
    Capacity - 4GB
    Speed class - 2
    Another - large capacity (GC)

    Please suggest a solution.

    What file system is formatted SD card in?

  • Photos deleted from Memory Stick, can they be recovered?


    I got some pictures on my memory stick and I deleted it now while it was plugged in to the computer.

    The files are not in my trash - does that mean that they are gone or they are on my computer somewhere

    Files deleted from a memory stick are not going to trash. If you have not used the stick since then you have a good shot to recover files by running this tool on the stick.
  • USB device not recognized... Vista laptop

    How can I solve this problem?  This quote keeps popping up on my VISTA laptop... "USB device not recognized.  One of the USB devices attached to this computer has malifunctioned, and windows did not recognize it. « y at - it a fix for this error that is displayed for Vista...» Please help it is so boring... I've tried everything.

    Hi, Cricketm,

    Sorry for the late reply.  You posted on the wrong forum.  I will move you to Windows Vista Forum.

    Try this solution:

    Tips for solving problems of USB devices

    Related topic:

  • Error when the USB ports are empty: "USB device not recognized".

    Original title: get popups for error USB malfunction even if nothing is plugged into one of my USB ports

    I get this error message appear several times on my computer hp laptop with Windows Vista Home Basic: USB device not recognized. One of the USB devices attached to this computer has malfunctioned and Windows does not recognize him

    But I have nothing in my USB ports! They are all empty. I removed everything. Nothing can stop this popping up every 15 seconds. I tried to uninstall all USB drivers in Device Manager, but this thing keeps popping up. Please help me. When I plug in devices to my USB ports, they always seem to work properly. The error message appears totally disconnected the actual functioning of one of my devices.


    I suggest you to follow these steps and check if that helps:

    Method 1:
    Try to perform the clean boot and check if it helps:
    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    Method 2:
    Try running this fixit and see if it helps:

    It will be useful.

  • Device not recognized USB error message - all USB ports.

    Apologies if all this seems a bit simple, but I'm not an expert, so bear with me.

    I have a laptop Fujitsu Siemens Amilo Li 1718.

    My USB ports have stopped working in 2-3 weeks.  I get the message "USB device not recognized.  One of the devices attached to this computer has malfunctioned and Windows does not recognize... »

    I don't seem to get any yellow exclamation point in device, all my drivers in Device Manager and software are up to date and Windows Update is running.

    My mobile phone and ipod always charge when I plug them in and out of this problem, everything works fine.

    In addition to the usual updates of Windows, only two other things have occurred since last, they worked.  One was that I renewed my subscription to Norton Antivirus, the other was that my laptop battery ran right out while he was in mode 'sleep' as I did not know that I had not plugged to the socket properly.

    So far, I went through some process as suggested by various items and/or help & support on  They include:

    * (From multiple locations) system restore has failed.
    * Diagnostic software Ran Fujitsu Siemens, which says that my computer is fine.
    * Run the virus scan who come clean.
    * Tries to connect via a USB hub.
    * Deletied the USB controllers in Device Manager to re - install.
    * Changing the settings of ForceHcResetOnResume 3-to-1
    * Change AdditionalCriticalWorkerThreads from 0 to 2

    (The last two I've changed back again after neither worked).

    My opinion of beginner, it's that looks like it will create new registry details for each device when valid seem to exist already is not thankful.  Although given my lack of technical knowledge, this could well be stating the obvious.

    So, now, I drew a blank.  Anyone got any ideas?  Got 9 months left a 3-year warranty, I don't want to go through the hassle if it can be avoided without too much trouble.

    Thanks in advance!



    Maybe these will help.

    Tips for solving problems of USB devices - and a Mr Fixit

    Hardware devices not detected or does not work - a Mr Fixit

    Have you tried to use an external hub powered by USB power is very limited in a computer and if overloaded
    strange problems will come up.


    Even if you did some of this departure please up and work until low and if necessary check
    with the utility.

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.



    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
    USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
    Try to remove all instances and restart then plug the drive.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for