Memphis B-mother Board's SATA ports

Similar Questions

• Memphis-s SATA ports

  I have a Pavilion of 500 - 205t with Memphis-s motherboard.  It has 4 SATA ports with different colors.  What do the different colours mean?  Is there a documentation available for the PC that describes this?

  Thank you.

  Hello again,
  
  Yes, the paper suggests so.
  But if you have just one hard drive that it doesn't matter at all.
  
  However, if you have several hard drives connected, you must use port 0 for training with the operating system installed on.

• ESXi 3.5 does not start after the failure of the card mother SATA port 0.

  I have a DELL PE1800 with ESXi 3.5 U3 Server installed on HD1. The card mother port SATA 0 failed. I bought a new sata, Rosewill RC-218 controller card. Installed and attached hard drives. Configured the BIOS to disable the integrated and restarted sata controller. Now ESXi 3.5 will not start.

  My old configuration has two hd with ESXi 3.5 U3 on disk 1 and my VM on disc 2. Now no drives are seen by ESXi 3.5. Yet see bios of them.

  Todd L.

  Another thing you could try is to install ESXi on a USB key. http://www.yellow-bricks.com/2008/07/29/ESXi-35-update-2-on-a-USB-memory-key/

  Plug your storage space on good sata port. I have an eye for a sata controller from dell PERC 5 can be had quite cheaply on ebay and others.

• PowerEdge 2900 on board sata ports

  I have a PowerEdge 2900 server and would like to put in a single spare 2 TB SATA for additional storage (non-critical).  The motherboard has two onboard SATA, A & B ports.  When I try to connect the drive onboard SATA ports, the BIOS does not detect anything, and when I change the type 'Auto', save the settings and restart settings are not stored in the BIOS.

  I don't know if the SATA motherboard ports supports hard drives, or if there is other reason things do not work.  I tried different cables and tried the drive in another computer, and everything works fine in another computer.  Plan to put in some additional SAS drives in the drive box, I'm looking for an intermediate solution.

  Any help is appreciated.

  Thank you
  Josh

  I've seen this same problem and fixed it. He must go to "Shipped" in the bios and enable "Onboard Sata".

• SATA ports on MS-7613 motherboard (HP G5370uk desktop PC)

  Hello world

  I have a PC HP G5370uk desktop (but with processor i5, new graphics card, and improved memory).  My next planned upgraded is a SSD and Windows 8.  I know the different shift than the races of motherbard SATA2 3 Gb/s, so I won't get all the benefits of a 6 GB/s SSD, but I'm happy with that for now.

  It's the map page mother HP http://support.hp.com/us-en/document/c02014355

  My question is, when I watch the news (from HWiNFO64) SATA, it is said there are #0 à #5 SATA ports, but I see only 4 ports on the motherboard.  And he also said that they run interface speeds.  Is down to devices that I've connected, or will they run all 3 Gbit/s, no matter what I plug into wise SSDS.  If this isn't the case, that plug in to for best results.

  Thank you very much in advance for any advice you can give

  Sean

  The jury only has 4 ports of 3 Gbit/s SATA2, numbered from 1 to 4 according to the scheme.

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

• 3040 OptiPlex Mini Tower, SATA ports?

  Just wondering if anyone knows how many SATA ports has the mobo in the Optiplex 3040. Support Dell didn't!

  If someone has a link to a photo or a specification for the mobo, it would be useful.

  iwrconsultancy,

  Here is the information you want on the Optiplex 3040 .MT

  1 x 3.5 SATA HDD
  2 x 2. 5 - inch SATA HDD
  "Total of hard/SSD drives: 1 x 3.5" / 2 x 2.5 "/ 1 x 2.5"
  SSHD (hybrid) free disk encryption - hybrid SED 500 GB 2.5 "
  1 optical drive x SATA 2.0

  NOTE:
  SSD m2 module is not supported.

  

  Places, and system board features
  1 x 1 PCIe (SLOT4) extension
  2 PCIe x 1 expansion slot (SLOT3)
  3 PCIe x 16 expansion slot (SLOT2)
  PCIe 4 x 1 expansion slot (SLOT1)
  5 RJ45 + USB2. 0 connectors (RJ45R1)
  USB3.0 6 Connectors (USB3R1)
  PS/2 KB and mouse connector (KMCOM1) 7
  Display 8 Port connector (DP1)
  HDMI connector 9 (HDMI1)
  10 line out connector (AUDIO2)
  11 intrusion switch connector (INTR1)
  The system 12 fan connector (FANS1/FANS2)
  13 CPU Socket (CPU1)
  14 4-pin power supply ATX (ATX2)
  Connector for fan thermal 15 (FANC1/FANC2)
  16 slots for memory Module (DIMM1 ~ 2)
  17 (APS1) CPU power connector
  18 card reader connector (SDCN1)
  19 audio connector (AUDIO1)
  20 USB 2.0 connector (USB2F1)
  21 USB 3.0 connector (USB3F2)
  SATA 22 connector ODD (HDD2)
  Drive HARD SATA 23 (HDD3) connector
  24 speaker connector (INSKR1)
  power ATX (surX1) 25 8 pins
  Power SATA 26 (SATAP1) connector
  Connector of drive HARD SATA 27 (HDD1)
  28 (BT1) CMOS battery
  29 LPC (LPC1) Debug connector

• SATA ports enable Compaq Bios Rev 3.15 Presario1230NX

  This model motherboard has two SATA ports. I am looking for options to enable them. According to the HP download site, I use the latest version of the BIOS. The ports there just for decoration, or are they useful?

  SeattleSam.

  Many sleepless nights is early and extensive reading. You can not have both Sata and IDE controllers active.

  (1) ATTENTION: This Board only supports the Sata150. You must provide a rider and the value of the player Sata150.

  This means that you must purchase a Sata150 and Sata300 drive (with a rider).

  (2) you must use the IDE emulation

  (3) start here:http://forums.techguy.org/all-other-software/483231-sata-drivers.html

  (4) then: http://www.computerhope.com/forum/index.php?topic=94838.15

  How and why you must create XP drivers:

  http://www.ehow.com/how_4829466_install-SATA-hard-drive-XP.html

  http://News.Softpedia.com/news/install-Windows-XP-on-SATA-without-a-floppy-F6-47807.shtml

  http://www.custompcblog.com/troubleshooting/installing-Windows-XP-SATA-hard-drive

  Happy now?

• Format HP G1 280 Microtour: HP 280 G1 SATA Ports

  Can someone tell me how many ports SATA is on the motherboard in HP G1 280 Microtour format?

  I already know that the PC has 1 external 5.25 "Bay and 2-Bay internal 3.5" x.

  @t0m

  According to the documentation I looked there are only three 3 SATA ports.  See the image below.

  

• HP Pavilion a6667c: HP Pavilion a6667c, install the HARD drive to the SATA port

  My question is: is it OK to install a hard drive extra (in this case, my old laptop drive) in one of spare SATA ports on the motherboard? My first two is taken over by my first hard disk and the optical stock.

  You can add the disk as a data disk. This tray will work. Data cable  

  The power supply should have additional Sata power lead.

• e-sata port

  my e-sata port no longer works, it does not recognize the bios, it works fine via usb, I bought a new speaker/interface, it is not that I ordered a new cable which will be here next week, will then check back in. Does anyone have any ideas?

  Thank you

  Thanks for the reply but the problem is solved, I just went to the mailbox and the new e-SATA cable was here, I plugged it and everything worked perfectly, it's hard to believe, but it was the cable.

  Thanks again

  Ross

• Lenovo g550 20023 HDD SATA port type of model?

  Hello

  I want to change my HARD drive, because it is broken and I need more info on my laptop Lenovo SATA port (G550 model 20023). I need to know if it is of type 1 SATA / SATA-150 or so is SATA II / SATA-300.

  Also please tell me if it is possible to upgrade to an SSD? Thank you.

  Kind regards

  Hi again,

  The topic can be closed. I contacted Lenove hotline.

  For all those who need this info: this is a port of type SATA II.

• HP ENVY 750-115no: add extra SATA port

  I would like to expand with one or two SATA ports to connect additional hard disks.

  Tested a PCI controller card, but it has been discovered at startup, or by the operating system. Having checked that the PCI slot is enabled in the BIOS settings.

  Question:

  Which controller card will work? Any suggestions? I could order one of HP?

  If you just need a data reader, use an external USB 3.0 to Sata Drive enclosure.

• m.2 port removes one of the sata ports?

  the Aspire xc - 710 has two standard SATA ports and one port m.2.

  Using the port of m2 for storage of solid state stops ONE of the work's native sata ports?

  i.e. There are THREE ports on the motherboard for three devices... or it's TWO ports that can be shared between THREE devices?

  Thank you

  Hello

  No, you have 3 ports available and 'independent': 2 SATAs x and 1 x 2280 m2. You can connected 3 devices.

• HP Pavilion Elite e9120y PC with mother board M2N78 - LA.

  I have a HP Pavilion Elite e9120y PC with mother board M2N78 - LA.  When it is turned on, it goes to the initial power of HP on screen (ESC, F10, F11 & F9) and stays there. The only time where could I get F10. He showed no boot device.  What is a motherboard completely dead?  Is there a similar replacement that will not affect installed licensed software?

  PhilmoIBM,

  There are several revisions of the Council M2n78 - LA. (like LasVegasWireMan) would testify. What is happening is the NVidia chip controller fails. You said "the only time I could get F10. She showed no boot device. "   That really explains it. Your motherboard is bad.

  I worked to create the list, but it never gets done.

  This series of motherboard has been installed in many different models of HP computers. There are problems.

  http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-t-see/m-p/181716#M13661 if you read through the pages 30 + you find mention of your unit.

  Here are the models reported with the guidance of M2N78LA failed. This is not the complete list.

  a4316f, e9140f, p5210y, p6130y, p6142p, p6157c, p6210y, p6214c, p6310y, p6320y, a6720y, m8530f, m9120y, m9350f, m9517c, m9530f, m9840sc