Menu bar of tasks and Windows Vista boot

Similar Questions

• How doI recover lost Manager menu bar tabs tasks and data use

  Some how I lost the menu bar and tabs and impossible to get processes, CPU use and commit chgs.

  checked to increase the resolution to increase (maximize) visibility without change.

  Anyone got a clue?  Thank you

  If you don't see the tabs in the Task Manager, then that means it works in 'tiny footprint mode' (sometimes referred to as 'Kiosk mode' or 'format') which does not show the legs or the menus above. This mode exists mainly for advanced users who want to put a small CPU counter in the corner of the screen using the performance tab. Sometimes this happens accidentally if you open and use the task manager often. To return to normal mode, open the Task Manager and double-click anywhere in the area of border (open) to reveal the tabs.

  See screenshot here.

• Windows Vista boot and goes directly to the F8 screen

  Windows Vista Boot and goes directly to the F8 screen, when you select an option it the computer goes black and never start. I do not install any program again, I worked with my online banking and the computer freezes I turn it off and restart and from there to show this problem. I test the computer with seetools to test the hard drive but when I hit to accept the test the keyboard won't obey my order; later I test with Hiren and I could make a mini feture call windows xp here I could see the C drive and all files on this too, I was able to open it. What you think about that happening could be the operating system or perhaps another problem?

  Hello

  Please follow the steps mentioned in the link below.

  What to do if Windows does not start successfully http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  Use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go to method 3.

  3. for the network icon.

  (B) to activate the icon network - Enable_Network.reg< click="" to="">

  * Don't forget to restart to complete the procedure. ***

• Last update of firefox has disappeared from my bar of task and the toolbar when on the internet. How should I do?

  After the last update of firefox toolbar at the top of the screen and the taskbar at the bottom of the screen no longer appear. How can I get back them?

  Wingfield said

  After the last update of firefox toolbar at the top of the screen and the taskbar at the bottom of the screen no longer appear. How can I get back them?

  I solved this problem by clicking the 3 horizontal bars (open the Menu) at the top right of the screen, then clicking on "Menu bar" in the options presented. All of a sudden my bar of task and the toolbar appears on the screen and remained.

• Recovery of Windows Vista BOOT MGR is missing

  HP Windows Vista loading SP and began a loop at 3 on 3. Now it says boot mgr is missing. I don't have a disk recovery or start. I use my newer computer with windows 8.1. How to make a floppy disk recovery or the HP windows Vista Starter? any suggestion would be appreciated.

  Discussions were merged.

  Duplicate is not removed as more information provided by OP.

  Hello

  You cannot repair Vista with Windows 8/8.1 except it can be used to download and create
  Disks of Vista.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  This is the troubleshooting methods to try to resolve the problem:

  BOOTMGR is missing Press Ctrl + Alt + Delete to reboot the error message when you start Windows
  http://support.Microsoft.com/kb/2622803

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  This tells you how to access the System Recovery Options and/or use a Vista disc
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try the startup of the Options or Vista recovery disc repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Repair the Windows Vista boot loader
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information.
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 and Windows Vista

  I'm trying to understand the differences in security of Windows 7 and Windows Vista. I am also generally try to understand how Windows 7 is Vista. If anyone has any information they can give me, I would appreicate it.

  At a deep level, Windows 7 is almost identical to Windows Vista, but with minor tuning and adjustments.  You can see how they are in the version numbers:

  Windows Vista is 6.0 internally

  Windows 7 is 6.1 internally (just a tiny 0.1 updated)

  As an example of the update minor: both use UAC, but Windows 7 student autonomous tasks the most initiated by UI so you don't have to confirm as often.

  This forum is for home consumers, to talk further about the security, you can visit our forums for it professionals to http://forums.technet.microsoft.com.

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Avira Antivir is compatible with Windows 7 and Windows Vista?

  Avira Antivir is compatible with Windows 7 and Windows Vista? I have ECS MOTHER card and 1 GB of DDR2 Ram, 160 Gb HDD.

  I have not tried on Windows 7 yet, but yes, it is certainly compatible with Vista. Steve Hebert - MVP Microsoft Internet Explorer

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• I have avg free 2011 and windows vista - do I need a firewall or I have a?

  original title: firewall

  Hello

  I have avg free 2011 and windows vista - do I need a firewall or I have a?

  If I need a free Zone Alarm would be correct?

  Thank you

  Chris

  Windows comes with a cleverly named Windows Firewall Firewall and AVG has its own firewall, I'm pretty sure. If you are fine as is.

• Resource monitor shows Windows 7 and Windows Vista running different programs

  I followed my programs and other at quite a bit lately since my system hangs and is running more slowly.  I'm trying to understand what might be causing this. I only had Windows 7 loaded on this desktop computer, as I bought it.  However, today I noticed that in the resource monitor to the title of the CPU that Windows 7 is the context of the operating system for some programs and Windows Vista is the context of operating system for other programs (including programs based Apple).  Is this a problem? Could it be added to some of my slowness and crashes?

  This indicates the operating system, the program has been designed to target. If the application does not specify this in its manifesto, it is assigned to a context of Vista. This has been added in Windows 7 that allows new applications to benefit from new features, while older applications continue to work on the former.

  http://social.technet.Microsoft.com/forums/Windows/en-us/cc0740eb-B06A-41a6-98e6-088529bf1f10/what-does-operating-system-context-mean?Forum=w8itprogeneral

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd371711.aspx

• Blue Screen Driver IRQL blue screen of death Windows 7 Ultimate edition and Windows Vista

  original title: BSOD Driver IRQL blue screen of death Windows 7 ultimate and Windows Vista

  I get the BSOD, and they are different every time.

  I had originally Windows Vista on my pc (HP m8300f) and it worked fine for 3 years until last month, I started to have these BSOD.

  So I thought a new clean install of Windows 7 Ultimate would solve the problem. Well, I was very happy to get the new operating system installed, but a few hours later that darn BSOD appeared and im now distraught.

  What is my RAM? My drivers? My hard drives?

  Computer IM but I'm certainly some type of technology. I have basic computer knowledge and that's all.

  You can download minidump files and find the information system here in this zip file http://www.sendspace.com/file/mfx420

  This issue is very very irritating and has ruined a lot of my work.

  Well up to now (18 hours) my computer has not had the BSOD and what I did is that I removed 1 GB of ram for my motherboard. Their were two sticks of 512 MB. I took them both. Now, I have 2 GB of ram running in my system and had not had a BSOD or an error after you have done this.

  What is the problem with my ram? I now have 2 sticks of RAM on my motherboard and both are 1 GB each stick. What is the mix n match that causes a problem all of a sudden? My computer came with this stock of installation. I also noticed the ram I got were the brand Samsung and the other on my motherboard are another brand.

  Well idk I hope it was my problem. We'll see.