Merged WebHelp TOC topic even shows 5 times!

Similar Questions

• Missing child Parent in a merge WebHelp TOC TOC (RoboHTML Version 9.0.2.271)

  Years, I have used Mr Grainge excellent document for fusion Help RoboHTML 8 to produce a WebHelp TOC. Recently I discovered that a child was left out of the merged TOC. Following the instructions (merging the child in the parent TOC, by generating the parent and generating the child) the child does not appear in the parent TOC. I get all the other children, but not the new.

  Any suggestions?

  Have you tried to rebuild all to a new location?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Browse sequences at merged WebHelp

  Hi all
  
  I'm working on a merged WebHelp project and I noticed that in the output of the navigation for each child project sequence is treated individually. Otherwise said, there is a full stop at the end of the sequence of navigation for each child project and I have to select the first topic in the next draft of the child within the table of contents for this sequence to browse. Is there a way to integrate them so that sequences of travel are managed consecutively?
  
  Either incidentally, did someone else noticed a delay in loading the table of contents in Firefox when one of the results of the project of the child is missing? This help file contains information for the 3 software separate, but related, users can have between 1 and 3 products (and, as a result, between 1 and 3 of the child of the help files) on their machine. If anyone has any ideas on how to launch Firefox by displaying the table of contents in a more timely fashion, I'd like to hear them!
  
  Thank you
  Melinda

  I noticed that even if the evolution of the refresh rate solve the problem of load, the table of contents are not autosynchronising immediately. It starts to sync after the user has clicked on certain topics, but it is not really satisfactory. I found an alternative method.

  Delete the redirect.

  Paste the following above the tag, text by changing the path to the same thing you had in the redirection.

  Change the body as tag below. Change the time-out if necessary, it is set in milliseconds.

  This gives the same redirection but OCD will sync OK. It also works well OK in Internet Explorer.

  See www.grainge.org for creating tips and RoboHelp

• Why show Audio time units does not work? Maddening problem.

  Gentlemen, I am posting from the iPhone and do not have net access for computer so I will be brief and I can't post screenshots.

  Mounting with Show Audio time units no longer works on my setup. Adobe CS5 Production Premium.

  Can I change only the images of the film (the project is 1080 p 24) and it absolutely does not allow me something else. I checked not checked and rechecked the tab a dozen times. Restarted the program and even my computer a dozen times. I lost my voice screaming.

  WTH is going on here? I put four 12 hours a day in this one and am now completely stuck. Impossible to move forward.

  I would be very happy to help. Display via iPhone is incredibly difficult. I opened an older project, and it was not too be able to change with the audio time units. It's like my first pro is broken, but I'm absolutely unable to uninstall and reinstall now. I need to fix here and now, located in the middle of nowhere with no net access.

  This has happened once before, and nobody had no answer. I was forced to empty the entire project. This is not an option here. Thank you.

  You probably already checked the obvious things like having snapping power off and ensuring that any audio signal which is linked to the video is separated before editing, but I must still mention.

  Try to launch Pr from the shortcut on the Start Menu (or however you launch an application on a Mac that does not involve a double click on a project file) while holding down the keys Shift + Alt (Shift + Opt on Mac).  Maj resets the plugin cache and Alt (Opt) resets preferences.  Hold down modifier keys until you see the Welcome screen in the PR.

  Jeff

• conditions or merged webhelp?

  What is the preferred mode of attack for modular help: terms of use or create merged webhelp?

  The product has a base module that everyone has access to and 2-3 optional modules. This is a very small project, Core has only 35 subjects (so far, but probably not too grow up), and the other modules only require probably about 15 topics of each. Oh, and there is a separate stand-alone application to be included in the main webhelp but also released as a chm in the case, it makes a difference.

  Is it more effective to simply create and apply conditions to the level of the topic and in the table of contents, or go through the process of creating merged webhelp?  For the size of this conditions to the project is probably the way forward, but what about for major projects? Are there other aspects?

  For a project of this size, it's not implemented merged help. Go with CBT.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Problem with merged webhelp

  Dear Sir.
  
  My problem is with the merged Webhelp project. links to external topics are not active in the main project, although these links work fine in the HTML help output.
  
  Thank you.

  Have you tried immediately to the notice to this link?

• Merging WebHelp & amp; Context sensitivity

  Hello. I am extracting a topic I posted in the wrong place. Here's the Exchange that I had with Peter Grainge. In the next post, I'll post my question extra (s):
  
  Peter Grainge wrote:
  For WebHelp, we use the method startpage'htm #path/targettopic.htm and it works well. See my site for more information. Visit www.grainge.org for a range of RoboHelp and creation of related topics
  
  
  hermi14 wrote:
  Thank you. Now that I understand the difference between HTML Help and Webhelp, I see that this sensitivity to context covers only topic merged with * HTML Help * projects (that use the CHM file). What happened is that I searched on this issue in several forums and did not notice that the heading covers "RoboHelp for HTML Help" (the output type) not 'RoboHelp for HTML"(the type of user interface)!
  
  I see now that my project must use the Webhelp format and I'm glad to hear that the context for Webhelp projects merged sensitivity has been developed successfully and documented already as compatible with RH7!
  
  Due to a combination of VPN access problems, the fact that I only have only another writer working on my project and my deep suspicion of applications like RoboSource Control (which was confirmed by a few trials), I decided to use projects merged instead of the control of source code as a collaboration tool.
  
  I'm sure you will hear more from me. You Rock (rap, or otherwise align).
  
  Peter Grainge wrote:
  Check out what you plan to do with your developers. This affects their calls for help.
  
  

  OK, answering my own question. (I hope that this will make up for some of the issues stupid newbie I asked so far and received a response very patiently by the gurus - for the most part, Peter G.)

  I just test the sensitivity of context to a merged webhelp project created in RH7 and use IE 7 and it works! Yahoo!!

  * I used the Javascript of a webpage to test call.
  * I only tested the RHShowHelp() function using the HH_HELP_CONTEXT parameter
  * I put the default theme (which is the first topic in the first merged project - one that is redirected to the parent project).
  * I bring a specific topic with no nav pane based on the ID of the card.

  As mentioned, I followed the instructions of Greg Minter of 2006 published on the website of PG. However, here are a few details/changes to these steps (please, forgive me if everyone already knew such things):

  You have not manually copy and paste the ID of the map ID card (* .h) files of the projects in the map ID of the parent-child project file. Just generate the projects of parent and child as usual and the references are automated.

  [Concommitantly] should not manually set the ID of the map (* .h) file in the output folder (mergedprojects\projectnnn), as he describes it.

  Woo-Hoo.

• Benefits of merged WebHelp?

  I'm working on a major project that ulitimately will be documentation of the whole society for all departments in WebHelp. So far, I have a Ministry completed in about 900 pages. There are an other departments 10 or so to go.
  
  Wouldn't be better to use:
  
  A. a huge file of WebHelp (project)
  B. Webhelp has merged with a project for each Department?
  
  The WebHelp could reach up to 10,000 pages. I think merged WebHelp would be easier to manage.
  
  All opinions welcome!
  
  Thank you.
  Diana
  Pro.TechWriter AT gmail.com

  10 000 links is fine. You must make your coffee so what better than every time you open the project some time. When it comes to generating assistance you can pinch to your sandwiches.

  Yes the project will work but not you.

  I split a project precisely because it is around this size and everything was too long.

• Each inbound and outbound e-mail shows wrong time

  Each inbound and outbound e-mail shows wrong time, but I do not see where them reset the clock of Thunderbird. The portable operating system setting is fine.

  Thunderbird uses the computer's clock.
  The time is maybe OK but what about the time zone setting?

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

• Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello

  You can enable the detection of wrist as well as an access code and unlock it with the iPhone:

  • On your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > wrist Detection - this turns on.
  • On your iPhone, in the application of the watch, go to: Watch My > Passcode > Passcode turn on (choose a Simple 4 digit access code or a longer).
    • Also in the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually or unlock your iPhone. Then, it will remain unlocked until you delete the monitoring of your wrist, when that it locks automatically.

  You can also set your watch to the screen to reactivate automatically when you lift your wrist, even select what is displayed on the screen to wake up:

  • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
    • Active screen Wake on revival of wrist, and;
    • Choose if the watch should resume last activity or see the Face of the watch.

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• Huawei E160 DONGLE... DOING NOTHING NOT WORKIN AT ALL... OH LIGHT DONGLE WORKS ALWAYS... NOT EVEN SHOW IN MY COMPUTER AS CD-ROM... I THINK THAT IS NO SOFTWEAR ON IT... ???

  DONGLE NOT WORKIN ANY, DOING NOTHING... OH LIGHT DONGLE WORKS ALWAYS... NOT EVEN SHOW IN MY COMPUTER AS CD-ROM... I THINK THAT IS NO SOFTWEAR ON IT... ??? Download the updated softwear 4it sum... This does not work... keeps saying CANT FIND PC DATE Cardinal... an other updates--don't do anything... what no gud...

  http://support.Huawei.com/support/ForumCenterIndex.do?colID=ROOTENWEB | CO0000000175

  Contact their support at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon.

  Mick Murphy - Microsoft partner

• I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error.

  I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error. first time using windows 8.1 but restore for windows 8. but problem still. How do reslove this problem.

  Hi Anish,

  If you receive the error 80072efe or 80080008 when you use Windows Store, the cause may be an interruption of the connection between your computer and the Windows Update service.

  Here are a few methods you can try to solve this problem.

  Method 1: Run the Windows Update Troubleshooter.

  Open and run the Windows Update Troubleshooter to fix the problem automatically.

  Method 2: Run the troubleshooter for Internet connections.

  Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), inbound to identify and repairin the search box, and then tapping or identify and repair network problems.

  Method 3: Restart the Windows update service and check.

  a. press or press the Windows key + R, type services.msc and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

  c. find the Background Intelligent Transfer Service and check the status.

  d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

  e. search Windows Update and check the status.

  f. If the status is stopped, click Windows Update, and then click Start menu.

  g. close Services.

  Method 4: T emporarily disable the security software and verify.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also check out the link and check if it makes a difference.

  Solve problems with a soft

  Please an update of the results to help you further.