Merger of converter for workstation or ESX

Similar Questions

• What is the fastest way to convert VMWare workstation VM of ESXi?

  Hello

  Was curious to know what is the quickest way to convert a VMWare workstation VM to a VM compatible ESXi. Is the method of standalone converter VMWare at the following ADDRESS of the faster method:

  http://www.networkinghowtos.com/HOWTO/convert-virtual-machine-VMware-Workstation-ESXi-vSphere/

  Or is the method below faster? The method below mentions converter standalone is required for Workstation 8 VM but did not mention if it is needed for Workstation 8 AND HIGHER VM (ie: 9 and 10 workstation).

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1012258

  My ultimate goal is to export on a USB key and then import on the ESXi instead of convert and copy it to the network server. I'm exporting to my 3 TB USB would be faster than the copy of the virtual machine on the network. Thoughts?

  I think the second is the best option VMware KB: export of VMS in VMware Workstation to ESX/ESXi

  As you can see you can export the VM and after import on the EXS (do not use personalization)

  But uf you have Vmware Workstation 8 or higher, you can connect to the ESX Server and move the machine. If you are in the same local network and do it at a time of low workload, it would be the best option.

• Convert/export Workstation to Vsphere?

  I don't know if this is the proper forum for this.

  I have a v7 Vmware Workstation WITH 1 instant machine I want to export so that I can run in Vsphere 4.1

  There is a vmware KB article:

  Export of VMS in VMware Workstation to ESX

  (I don't have the KB # because it is not print)

  In any case, this means that you can do this WITH snapshots (I blieve this is point 5).

  Now, if I use the instructions, it will fail with 'comments unsupported OS' (SLES 11 64-bit in this case).  For some weird reason.  If I adjust the "OS" type in vmware workstation so that there 'another 64 - bit', then convert it.

  But it does not in the snapshot.

  Unfortunately, I need to bring during the snapshot.

  But I see a completely Ko diff, which indicates that you CAN use the converter with snapshots.

  So what KB's right?

  Import a VM WS with snapshots on ESX (i) AND by keeping the snapshots is not supported by any version of the converter.

  If a KB is claiming that this is possible, it should be fixed.

  However, you might think of ways to do it manually - but the effort would be significant - nothing that could be done with a procedure ' click here / click here.
  I would consider rather to create two or more different VMs

• Run 64-bit VM 7 Workstation in ESX 4 VM

  I've been scratching my head for the past few hours to see if it was possible to run VMware workstation within an ESX 4 VM. Our desktop deployment team wants to create their basic images to deploy outside (as Ghost) within the server that is virtualized. So far, I found the guide to enable vmware workstation in a machine virtual esx - http://communities.vmware.com/docs/DOC-8970

  Are there tricks to allow 64-bit workstation vms in this scenario?

  I also noticed that if you run a CPU checker, it reports that the CPU is not VT enabled inside the virtual machine, but the external host is enabled. ESX removes access VT of the guest OS? I'm sure we can come to a workaround, but I'm just curious of my knowledge... Thank you!

  Lance

  Simply create your golden VM image directly into a virtual ESX (i) machine. You can use vCenter converter 4.2 to convert the VM ESXi virtual Workstation machine, if necessary. The project I support is likely going to go that route... master VM on ESXi, convert VM Workstation, then capture/deploy with SmartDeploy.

• workstation to esx vmdk

  Hello

  How to use a virtual machine, I did with workstation in esx?

  Use vCenter Converter to place this VMS on ESX.

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• A virtual machine created in ESX 4 can be converted to run an ESX 3.5 Server?

  The subject says it all.  Our main office has created a virtual machine on their ESX 4 server running.  They want us to use the same but we are running ESX 3.5.  We have no time to upgrade our server to 4 again.  We get an error when we try to start by saying this is not not compatible because it was created with a version with more features.

  If a virtual machine created in ESX 4 can be converted to run an ESX 3.5 server using converter?

  most important:

  change

  virtualHW.version = '7' to '4 '.

  in the vmx file

  then change

  ddb.virtualHWVersion = '7' to '4 '.

  in the vmdk file

  the other changes are optional - for example, you need to remove the lines that start with pciBridge and all the lines making reference to... .pciSlotNumber

  also take care of not to use more then 6 PCIdevices in 4 virtual material - i.e. the sum interface cards scsi controllers + network + video cannot be greater then 6

  If you have a time that is very simple and much much much faster then converter - post an example if you want

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Do I need a converter for my Macbook when traveling in Ireland or just a form of adaptation?

  Do I need a converter for my Macbook when traveling in Ireland or just a form of adaptation?

  Just a form of adaptation.

• Serial port PCI and PCI Simple Communications controller for workstation Z200 drivers.

  In the Device Manager Windows XP, (in other devices) PCI serial both the simple PCI controller are yellow/exclaimation marks.

  Help, please

  Thanks to all good.

  P.S. this thread was moved from the business PCs - Compaq, Elite, Pro for workstations - z series, series xw and legacy x series w - moderator of the Hp Forum

  Hello:

  Plase see if this driver installs these devices.

  It should install the PCI serial port device.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=4100568&prodNameId=4100644&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=wk-104237-1

  If it does not install the simple comms PCI controller, see if this driver installs only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=VC-87672-1&mode=4&IDX=1&prodTypeId=321957&prodSeriesId=3688868

• Image Data Converter for Mac rotation loop

  I have the latest version of Image Data Converter for Mac.  Normally I use Lightroom, but I wanted to try this software because it is designed for Sony raw files.

  The software works pretty well on my Mac Pro 2013, unless there are too many raw files in the directory in which I work, OR, apparently, in the surrounding directories (that is, a library of raw files. organized in folders named after the date  In this case, although the program opens very well (even if it can run for a while at the beginning, no doubt scanning the photos in the folder), attempts to change a raw file quickly causes the program to enter a loop of rotation.  The progress on the operation bar to progress issue (change of saturation, noise reduction, etc.) all the way to the right, then the program hangs forever.  In one case, I waited an hour to see if it would eventually take himself off, but no luck.

  If, on the other hand, I do a new folder outside the hierarchy of photo library, copy all the raw (40 - odd of them) files in the new folder, and then the Image Data Converter point to the new folder, it works very well.

  This is a really special bug.  This means that the software works for people who are only noodling autour, but if someone wants to do a serious blow to a large library of publishing, he can forget it!  This is really not the kind of behavior of Sony would allow.

  Hi mr_protocol,

  Thank you for that bring to our attention. We will send this for good service for future updates on the software.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_MItch

• USB or HDMI Converter for dual Moniters?

  I searched for an inexpensive way to set up my second screen before investing in a new video card for an office that is not even a year yet. I wanted to first find a USB VGA Converter, but for some reason the converter, I bought seems not to register. I'm doing something wrong with the adapter? Or should I look for in a converter for HDMI port?

  The pilots did install?   Use the diskette supplied with the product.

• Difference between convert it to a smart object and convert for smart filters?

  Hello

  I'm curious to know is there is a difference between the right clicking on a layer and convert it to a smart object vs going to the menu Filter and choose Convert for smart filters?

  I don't think that there is a difference.  When you use a filter on a smart object to a smart filter layer.  The layer must be a dynamic object for a smart filter layer filter it is a catch 22.

  Apply dynamic filters in Photoshop

• Find the good DNG Converter for new cameras... work with CS4... OS Win

  I am running Win XP Pro latest version with SP3.  I have the latest update available for ACR (5.7xx). I need to open the A7R Sony and Nikon D800E RAW files with what I have. Where can I find the good... best DNG Converter for the two test devices... so I can continue to use CS4... for now?

  I know that the simplest solution is to subscribe to CC, but as I'm about to Win 10 in the next few months... I need to unsnarl this mess first.  Meanwhile, I need to work with files D800E and A7R from Sony

  Hi cmatter

  You the best option is to switch to Windows 08/07/10

  In the meantime you can use the 8.3 DNG Converter

  Download link:- Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.3

  Concerning

  Assani

• just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a subventio

  I just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a notification to come as States "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of camera raw.

  I'm entered in Photoshop and loaded the dates above, but have met 3 mistakes when you do this (1) Adobe Bridge CS5 4.0.5 (2) Adobe extension Manager SC5 5.0 update (3) 12.0.4 for Photoshop CS5 Photoshop

  I tried for 2 days now to try to get the operating system for your support/help will be most appreciated.

  My old camar is an EOS20 D and I have no problem with CR2 files it produce

  Hi rodaks, george

  Images II 7 d would be directly supported in Photoshop CS5 as requiring a new camera raw.

  So, you must download the free DNG Converter to convert these images to DNG and then open the DNG converted in Photoshop.

  See this link for download DNG Converter 9.0:

  For Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.0: thanks

  For Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.0: thanks

• Licience for Workstation 9

  When I passed the VCP 5 test I got a licience to workstation 8.  When I turned on my computer today, he invites me to upgrade to Workstation 9.

  Is this my works licience for Workstation 9 or is it 8 specific workstations?

  Thanks for the information and have a good long weekend (day of work on Monday to the United States),

  Anthony.

  License keys only work for a specific version, and I don't think that the free license can be improved. However, you can try to see if the license shows also extensible in your My VMware account.

  André

• Best tolerance\failover of fault for two identical ESX 3.5 hosts

  Hi, I'm wondering what the best way to configure ESX3.5 on two physical hosts making it fault tolerant\mirrored or for the best technique for tipping...

  VM slices are on a data store on another server. I hope that this question is not too vague? Thank you

  If vSphere isn't an option, then (by definition of VMware) fault tolerance is not possible. With ESX 3.5, the only option of failover is HA (make sure that you have the VMware license which includes HA), which requires vcenter Server as well.

  Yes, DRS and HA can be activated at the same time.

  According to what the VMs system will do, I would recommend having at least 4 cards with 2 NICs by vSwitch network. In vSwitch0 I place the Service Console and VMotion VMkernel (VMkernel is required to connect to your NFS data warehouses) - all require unique IP addresses. In vSwitch1, I would create all groups of port VM (i.e. virtual local networks). According to future plans, performance requirements and others, I would personally use 6 cards per server, 2 by vSwitch and Service Console and VMotion in vSwitch0, VMkernel vSwitch1 and port VM groups in vSwitch2.

  If the plan is for 2 guests ESX 4 NETWORK ports in the NFS box should be fine.