Message: "COM Surrogate has stopped working"

Similar Questions

• Error message "Com Surrogate has stopped working"

  Original title: popup Windows Com Surrogate has stopped working? What dose that mean? Also computer very slow suggestions?

  This popup comes in at any time and have noticed the computer has been running for extremelyslow. Also Windows will open programs without asking for confirmation. When I run analysis said updates I'm uptodate and the functioning of the system. Any suggestions?

  Hello

  
  Com Surrogate has stopped working:
  
  Were there any changes (hardware or software) to the computer before the show?
  
  Start the computer in safe mode and see if the problem persists. If the issue is not perist in safe mode, and then put the computer to boot and see if the problem still occurs.
   

  Step 1: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: to help troubleshoot error messages and other issues, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
  
  Computer running extremely slow:
  
  

  Perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

   
  In addition, please see the link below for this error:
  COM surrogate has stopped working, how do I start
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/COM-surrogate-has-stopped-working-how-do-i-start/d4c25d96-e719-4ED3-91e2-2c3a06faac11
  Hope this information helps.

• When you try to view the images get message 'com surrogate has stopped working ".

  Original title: com surrogate has stopped working

  When I try to view my pictures, after a visit some of them, I get an error saying "com surrogate has stopped working". I just bought my phone yesterday and today I tried to show them. I don't have nero or DIVx on my computer. How to solve this problem? I have a windows 7-64 bit

  Hi SualehKH,

  Check out the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-photo-viewer-broken-by-Intel-Corporation/5b762252-56E0-4DD6-8581-83030c4790e3?tab=AllReplies

• "COM Surrogate has stopped working"

  OP: COM Surrogate
  How can I get laughs at the pop up message "COM Surrogate has stopped working '?  What is it???  How should I do?

  Here's the resolution that I found to work for me on Windows 7 Pro 64-bit computer.

  Boot from a live CD and remove dllhost.exe "C:\Windows\Syswow64."

  I did not remove dllhost.exe to the System32 folder.

• import of vio - pov cam divx files hangs: "COM surrogate has stopped working".

  Windows vista 64 4 GB of ram, 2.1 mhz

  First elements 9

  Import divx .avi VIO pov camera file blocks adobe PE9 with message: COM surrogate has stopped working.

  If I uninstall divx then PE9 won't crash, but only audio is present.  VIO said correct codec must be obtained from Adobe.  Is there a fix for this so that my $100 is not lost?

  Unfortunately, DivX and Xvid are not well taken in charge, or not at all. Some have had better luck with pre 9.0.1, but they are few.

  In order to ensure that things are as good as they get, I follow the steps described in this ARTICLE and also make sure you have the latest version of the DivX CODEC installed.

  Of CyberLink PowerDirector seems better to work with images of DivX, than does any program Adobe NLE.

  Good luck

  Hunt

• Equium A300 - error: COM surrogate has stopped working

  I have an error message saying COM suragate has stopped working.
  Any ideas on what it is and how to fix it?

  Hello

  It s the first time someone request for it here in the forum
  I searched the forum but I could not.

  Then, I used google and found this page:
  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  There are various possible solutions.
  Looks like DivX and Nero software might cause this error message.

  Check this page for the right solution.

• COM Surrogate has stopped working problem has caused the program to stop working and windows will close the program

  Impossible to uninstall anything without this message to come. solution is to download the micorsoft updates that are important and I did, and the message always appears

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  Read the info above relating to the resolution of this problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: COM surrogate has stopped working

  Original title: I have a message appeare when I start to open any file that is the message... COM surrogate has stopped working
  the programe COM surrogate has stopped working

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• COM Surrogate has stopped working... Resources Windows Protection finds corrupted files

  System information:

  OS: Windows 7 Professional 64 bit installation factory

  Antivirus: Windows Defender Antivirus (automatic update)

  All the updates of windows installed

  Question:

  After trying to display several images in a row using "Windows Photo Viewer", I get the following error message:

  "COM Surrogate has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  Solution attempt:

  Guest ran from the administrator account (start / all the Programs/Accessories/do right click on command prompt / click on "run as administrator / click on 'continue, yes'") and run the command: SFC/Scannow.

  Result:

  Start scanning system. This process will take time.

  Pghase verification of start of system scan.

  Audit 100% competition.

  Resorce Windows protection found corrupt files but was unable to fix some of them.

  details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log.  For example C:\Windows\Logs\CBS\CBS.log

  -------------------------

  What should I do now?

  Thank you!

  Hi cedric,

  Thanks for posting the query on Microsoft Community.

  I appreciate your efforts and your time.

  I suggest you to try the clean boot and check if it helps.

  This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in Windows. It starts Windows by using a minimal set of drivers and startup programs.
  How to perform a clean boot in Windows: http://support.microsoft.com/kb/929135

  Note: After troubleshooting, consult this "How to reset the computer to start normally after a boot minimum troubleshooting" section in the link above.

  If the problem persists, try the below mentioned steps that can help you in the matter of fixing:

   
  a. click on start.
  b. right-click on computerand select Properties.
  c. click on Advanced system settings, click the Advanced tab.
  d. in the performance section, click on settings.
  e. Select the "data execution Protection" tab and then click on the option "turn on DEP for all programs and services except those I select".
  f. click on the Add button and look for to C:\Windows\System32\dllhost.exe
  g. click Open, click OK in the warning message.
  (h) click apply and OK.

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• COM Surrogate has stopped working suddenly?

  I had my PC Windows 7 Home Premium 64 - bit since March, 2012.

  Tonight, October 17, 2014, I started getting an error "COM Surrogate has stopped working" pop up, all the time, for no apparent reason.

  I can not play with Windows Media Player AVI files without this message and ALSO a message that WMP has ALSO stopped working.

  I can't play AVI files in right click on the video and using 'Play with WMP Basic' without also getting this message as soon as I do a right click.

  I don't know if it's related, but since YESTERDAY I can't load YAHOO! in Internet Explorer. The page will simply not load, so I can't check my email official, formal and work-related.

  Chrome works very well, so I CAN access YAHOO! my general, leisure, pleasure and e-mails related to the game.

  I always allow upgrades of Windows, so I don't understand why it started to happen out of the blue.

  I have a current Antivirus with BitDefender Total Security and perform regular maintenance.

  Any suggestions on a fix for this?

  Thank you very much

  (Moved to programs)

  The first error points to the ffdshow.ax:

  Fault Module name: ffdshow.AX
  Fault Module version: 1.3.0.0
  Module Timestamp error: 53aedcb1

  The second error points to the avformat-lav - 55.dll:

  Fault Module name: avformat-lav - 55.dll
  Fault Module version: 55.43.100.0
  Module Timestamp error: 00029000

  The ffdshow.ax and avformat-lav - 55.dll can be components of a pack of codecs such as the K-Lite Codec Pack.

  Codec packs are / are installed?

  You can uninstall the codec packs and see if the error resolves?

• Com Surrogate "has stopped working" what installation police FTT on C drive under Vista 32 bit?

  Last night, I acquired and scanned [for security issues] 3 font TTF files to install in the C:\Windows\Fonts folder as usual.

  The first two fonts went fine, BUT the third "Berlin Email schéma" police threw up an error Com Surrogate "has stopped working".

  As I said, I scanned the font files before any attempt to copy/install the...

  I also ran a complete check & repair on drive C, last night, with no reported errors / bad sectors.

  Now, I am running a full analysis of McAfee on my computer - which I doubt will lift up to the top of questions, but I try to be thorough.

  Despite Com Surrogate, I have no problem display of media files, or opening files / media such as MP3s and JPEG playback.

  Any suggestions? I don't want to run with a fixable problem unless I have to... and I would rather have back the possibility to install fonts for my graphics work [I have about 10 fonts plus the basic package provided by Microsoft, so far, so I'm not clog the system!]

  Thanks in advance for any help.

  Thanks for the response - in fact, I had tried the 2nd suggestion, after reading the other sons of COM Surrogate. It did not work.

  However, in the pack of fonts that I downloaded, I noticed that it contained files of the Foundation as well as TTF versions... Curiosity got to me and police OTF files installed correctly [and work properly in Word and Photoshop] without these errors.

  I can only imagine files TTF for 'Berlin Email' to Peter Wiegel variations of police [medium, outline etc.] that are widely available on the net must be correctly written. Although his records from OTF to the same fonts are very good [that are police records I have of other 3rd-party designer-programmers, installed on the same day].

  As each disk check, the repair process, scanning and virus check is 100% clean, and all media connectedness files I use work perfectly, I'm 99.9% sure that it was a font error codes file and not any form of operating system error.

  So my DEP settings are left on during all programs without exception, and I don't see any more errors.

• the backup was told that the com surrogate has stopped working I have what to do, I can back up my files on a disc

  I click on start I'm going to the backup and restore, that a window appears which says COM surrogate has stopped working.  It says windows notify me when a solution has been found.  That a window opens for to upgrade me the computer.  The computer is updated.

  Hello

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

• COM Surrogate has stopped working the photo library

  Original title: ken evans
  I have COM surrogate has stopped working in my photo gallery

  Hi kenneth,.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.vistax64.com/tutorials/76905-system-restore-how.html.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work or you do not have a restore point will come back enough, check out the following article on this error and a few solutions: http://www.howtogeek.com/howto/windows-vista/fix-for-com-surrogate-has-stopped-working-error-in-vista/.

  If that doesn't work, first make sure that Vista is up-to-date on all service packs and updates and then try the new Windows Live Photo Gallery Windows Essentials: http://explore.live.com/windows-live-photo-gallery?os=other who can not only solve the problem, but can improve your experience with her because she is improved and strengthened.

  I hope this helps.

  Gooc luck!

• Error when you try to view the image with Microsoft Photo Viewer: COM Surrogate has stopped working

  When I try to post a picture (JPG) with Microsoft Photo Viewer, I get "COM Surrogate has stopped working"

  I don't have Nero or DivX installed, which is what all the forums seem to indicate the cause of the problem.

  Can you suggest anything?

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  The above information on the problem is explained in the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: "COM Surrogate has stopped working" while looking at pictures in Windows Photo Viewer

  Original title: the window picture viewer does not

  Windows Photo Viewer seem hangs (not responding) after some reversal if image file in an image folder. Try to complete the Viewer by using task Manager, error popup saying com surrogate has stopped working. Windows 7 can not even stop after that. I have to do a hard reboot.

  It seems functing fine, until I uninstalled Mcafee Security Center, ran a program of removal of Mcafee, Development and installed kaspersky internet security 2011.

  Have someone faced this problem before?

  Need your advice.

  Try this. It worked for me. So far, the question has not returned.

  In command prompt type each separately and press on enter after each. It is the reinstatement of the .dll

  regsvr32 vbscript.dll
  regsvr32 jscript.dll