Message "computer meets the prerequisites to install this software" when trying to install Microsoft Streets and Trips 2011
Original title: Microsoft Visual C++ 2010
I tried to download Microsoft Streets and Trips 2011.
When I try to download the same I get an error message indicating that the installation has detected that this computer does not meet the obligation to install this software. The following blocking issues must be resolved before you can install Microsoft Visual C++ 2010 Redistributable package Setup software. It also shows "a newer version of Microsoft Visual C++ 2010 has been detected on this computer.
I'm on Windows 8 with the current version of windows.
Any help would be appreciated.
Thank you
Thank you
I tried in vain compatibility mode and tires another answer, I found in the community. I deleted the 2010 x 64 and x 86 version 10.0.40219 of the Microsoft Visual C++ 2010 and then installed Microsoft Streets and Trips without a hitch and it installed it own version of C++ 2010 is version 10.0.30318. I hope that this will affect other programs. Question - can you now install the new version without compromising the Streets and Trips program?
Tags: Windows
Similar Questions
-
HI, I keep trying to install streets and trips 2011 on my Windows 7 computer. The installation files say it is installed correctly but when I try to open, I get an error message that the registry files are not correct. Must re-run Setup. It is a brand new program that I just bought. What is going on?
original title: streets & trips 2011 will not be installed. Incorrect registry problem files. Windows7You're more likely to get a useful response to the Highway, Streets & Trips, MapPoint Forum
Good luck with it,
-
I had problems with my version of Streets and Trips 2008 and decided to upgrade. After installing Microsoft Installer, I get the same error message. "the program has not been copied correctly in the registry. Rerun Setup from the same place. »
Try the procedure suggested Installation problems streets & trips 2010
If that does not solve the problem with your new streets & trips 2010, tell us what problems you have experienced with your earlier version of streets & trips 2008. Only has the old installation refused to start, or other issues?
You can look for answers and advice associated with Microsoft Streets & Trips to the forum: http://www.laptopgpsworld.com/microsoft-streets-trips/
-
I just bought Streets & trips 20011. I uninstalled S & T 2007. When I try to install S & T 2011, I get an error message saying that microsoft visual c++ 2010 redistributable cannot be installed. Same thing if I try to install from the DVD or download. I 10.0.40219 c ++ 2010 is installed. I use win 7 pro and Office 2010 Pro installed. I've read elsewhere that S & T 2011 will not work with the latest patch for microsoft visual c++ 2010 redistributable. If that's true then I would like official confirmation in order to be able to return S & T and get my money back. Otherwise I won't be able to return, because I opened the package.
Thanks in advance for any help you can offer
SOLVED!I called the 1-800-MICROSOFT to support. I have given a file number and transferred to technical support. The answer was so simple I wonder why MS isn't just after it. So here it is:
After trying and failing to install the downloaded version of Microsoft Streets and Trips 2011 trial (failed, because I have the latest version of microsoft visual c++ 2010 redistributable and the program trys to install an earlier version, but then just ends) there will be a subfolder and subfolders installation on your hard drive files.go to the "Microsoft Streets and Trips 2011\ST2011\Streets\MSMap\" folder and run the file called "data .msi.The program will install and everything is good. -
Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs
Installation of the new version of Microsoft Streets and Trips 2011 Win7 on my desktop HP says that it is installed. However, when you try to open it, I get this response: "your registry settings for this application were not copied correctly. To correct these settings, restart the installation of this application from the location that you originally installed it. "It won't let me open the program, even after I tried installing from the Microsoft Download Center and DVD disc several times. He never asked me code product key during installation. What can I do?
Bill
There is a forum dedicated Highway/Trips/Mappoint and streets that would be better to help with your problem.
Click on the URL below a link to post your question.
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsI hope this helps.
Marilyn
-
After installation, I keep getting the message "your base registry settings were not copied. Run the Setup again"I tried several times without success
Hello
Check with streets and trips and support the community and Forum.
Streets & Trips
http://www.Microsoft.com/streets/en-us/default.aspxpStreets & Trips - help and Support
http://www.Microsoft.com/streets/en-us/support-and-training.aspxStreets and travel community
http://www.Microsoft.com/streets/en-us/community-and-news.aspxStreets and travel Forum
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsSupport for MapPoint, streets & trips and Highway
http://support.Microsoft.com/ph/851I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
There was a message to keep the machine to install Microsoft Updates when I tried to shut it down
Original title: many updates
For almost all stop downs recently, there was a message to keep the machine as a download is being installed. Ms?
Hello1. what operating system is installed on your machine?2. were you able to install the updates successfully?
Microsoft updates are essential for the proper functioning of your system and keep your computer up to date. If a message appears during stops or startups, it's quite normal that it installs the updates recommended by Microsoft.Look for updates in the update history.
a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
(b) in the left pane, click view update history.
c. to display more information about an update, double-click it.
For more information, please visit:Install Windows updates in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I'm trying to use the GPS feature in Microsoft streets & trips 2011. I connect my Garmin nüvi 40 to a USB port and it says "device not connected" when I click on Configure GPS. The USB ports on my work computer and I connect the GPS and use it to download/download photos and today I updated maps of garmin.com. It was no problem. However, Microsoft streets & trips 2011 is unable to see the GPS device no matter which USB port I use.
Anyone know anything about this?
Any suggestions would be helpful
Thomas
Hello
I would recommend posting your query in the forums of Microsoft streets & trips.
http://social.Microsoft.com/forums/en-AU/streetsandtrips/threads
See also:
Troubleshooting Garmin, DeLorme or other third-party devices with Streets & Trips, MapPoint, or highway
-
There is this computer that I recently installed Windows NT Workstation 4.0 on and I would like to know how to install sound blaster 16, on this without receiving this error message. If someone wants to say how it is obsolete or install a new operating system, please do not post. Thank you. If anyone has the same issue on an ordinary pc or Virtual PC, you can publish. It is a computer. If you're going to say how microsoft does not support, I need to install a better operating system or the above mentioned inconvenience or something similar to those, please do not post. Any help will be appreciated. The specific sound card is Creative Labs sound blaster Pro 16 of 1.x.
Hello Grant Heckel,
Windows NT Workstation 4.0 is not supported in the Microsoft Answer forum.
You can do a search on the internet and find information about the Sound Blaster Pro 16 and NT 4.0 Workstation.
Such a thread is listed below:
http://www.pcguru.plus.com/VirtualPC.htmlSincerely,
Marilyn
-
Error message for streets & trips Exe.
Missing Mfc100.dll
Hi, Don,
Republish the question on this Forum
Highway, Streets & Trips, MapPoint - Forum
http://social.Microsoft.com/forums/is/streetsandtrips/threads -
I have a problem with the installation of the streets and trips 2009 on the computer.
I buy a liscensed and legitimate copy (disk) of Microsofts streets and trips 2009 staples and have installed more than once on the same computer due to re-formatting and now the disc is damaged and I need to re - install again. How to do this without having to buy an another diskand liscense? Once again. I have a liscense and this copy has beenregistered with Microsoft.
Original title: streets and Trips2009 download?
Hi Craig,.
I wish that you contact Streets and Trips for assistance.
Check out the link-
http://support.Microsoft.com/ph/1058
You can also post your request in the forums of Streets & Trips.
Check out the link-
http://social.Microsoft.com/forums/is/streetsandtrips/threads
Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.
Thank you.
-
Mfc100.dll of error missing at the launch of the application "Streets and Trips".
Original title: missing mfc100.dll
Streets and trips 2011 will not start after the initial installation. The following message appears: "this program cannot start because mfc100.dll is missing on your computer. Try reinstalling the program to fix this problem. ». Many relocations and reboots do not fix the problem.
Any suggestions?
Hi ABQGordon,
· What is the operating system installed on your machine?
Method 1: I suggest you install the redistributable Visual C++ 2010 for Windows form just one of the link below and check if it helps.
For 32-bit operating system
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84
For the 64-bit operating system
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BD512D9E-43C8-4655-81BF-9350143D5867
Method 2: Try to perform the file system checker and see if it helps, here are the steps:
a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
b. click on continue or provide administrator credentials if prompted.
c. in the type in the following command prompt window and press ENTER:
sfc/scannow
Here is an article that will give you information about Scan SFC:
http://support.Microsoft.com/kb/929833
If the method above does not resolve the problem, I suggest you to post your request in the forum of streets & trips for any matter related to it.
http://social.Microsoft.com/forums/en/streetsandtrips/threads
I hope this helps.
-
Original title: OxC0040301
Im trying to install microsoft streets & trips and I keep getting an error of initialization of license and a code of Oxc0040301 and it tells me to contact customer support, can help you, please
Hi wendt1951,
1. what version of Microsoft Streets and Trips?
2. What is the exact error code?We recommend to try the steps in the following article and check the result.
See streets & trips gives an error message on the license when you try to start the programFor additional assistance, visit streets & trips Solution Center
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I'm a traveling salesman. I use the trip planner feature. I want to enter and save the name of the company and address to create slaes itinerary in a State or a specific city. A previous version of streets & trips were only allowed to enter and save the address, city, State or zip... I want to record the name of every company too! Is this possible with the 2011 version of Microsoft Streets and Trips? Thank you.
Hello
The question you have posted is related to Streets and Trips and would be better suited in the forum of Streets & Trips. Please visit the below mentioned link to find a community that will provide the support that you have requested. -
You can change the image of cirlce GPS in the streets and trips 2009?
Is it possible to change the thickness of the GPS circle and you can change its color?
No, the GPS location icon is an image file, and it cannot be modified/edited by users. (You would have to edit the file containing this resource, and it is perhaps against the EULA).
Other sources of information:
Community of users of Streets & Trips
Maybe you are looking for
-
Portege 7200: Brightness and contrast controls in Windows_XP
Please any lawyer how to drive contrast and brightness for laptop Toshiba Portege 7200 with system Windows_XPFirst of all thank you
-
I am wanting to upgrade of RAM on Presario V6503AU GN410PA model. Can I use 2x2gb pc2-6400 to give him something more or should I stay with RAM pc2-5300? Kind regards
-
I have a desktop computer Acer, about 4 years old, running Windows XP SP2. When I started my computer, it does not boot in any mode, and I get this error message: Windows has not start because the following file is missing or damaged:\windows\system3
-
My computer froze including keyboard.
I downloaded software that works for a different language for an (additional) external key board. When it asked me to reboot I did but my computer froze after and none of the buttons respond. I was able to open the computer and the connection but aft
-
After planning for a disk check (select Start - computer - local disk c - Properties - tab tools - error checking button now check - active automatically fix errors file system planning only - check disk) and reset, boot disk checking results can be