Message "Connection not secure" HTTPS when you view the yahoo mail website in firefox

Similar Questions

• Is it possible to display a "Not spam" button when you view the spam folder?

  I am looking for a quick way to mark messages as "not spam"

  There is a 'Not junk' button in the toolbar by selecting a message marked as "undesirable."

• Events shown in the range of navigation when you view the properties of the system for recording of JFR

  Which record the events shown in the range of navigation when you view the Properties tab system for a Java flight recorder? I'm guessing that they mark the time for JFR's writing of the events on the disk.

  I ask because, during the capture of a lot of information with the help of JFR, we see two effects that correlate with these events: (1) CPU usage ramps up a little bit between an event and the back then, level departure after each event, even if the application workload is constant; (2) the clock used to time stamp on all the events THAT JFR capture high-resolution seems to run more slowly in the period following immediately each of these events, perhaps for the period while JFR is written to disk. The slowdown of the clock appears as an increase in the rate of events shown in the range of navigation in other tabs - I also analyzed the events selected out of the original EN file to check their apparent rate.

  I see this on Java EE applications running on JBoss EAP 6.x on Java 7 on machines virtual small vSphere.

  The events shown in the navigotor range in any time must appear at the same time they are created. not when they are written to disk which can be a little later, depending on the settings.

  In the System Properties tab, you generally see a single spike per segment in your record. You should see the same thing if you go to the tabgroup events and enable only the Java Virtual Machine system property / Initial if Types discovered.

  As for the damages of its use and CPU timestamp, it sounds interesting.

  What exact version of Java 7 you use, there would be some bug fixes in later versions.

• Hello, I'm willing to give up my bundle of photography (Photoshop + Lightroom) project. I tried to do if however the plan itself does not appear here, be as creative cloud storage and on that there do not cancel option when you manage the plan. Its defini

  
  Hello, I'm willing to give up my bundle of photography (Photoshop + Lightroom) project. I tried to do if however the plan itself does not appear here, be as creative cloud storage and on that there do not cancel option when you manage the plan. Its really here because I'm still charged monthly for it. Any cancellation help please?

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

  -or directly at this link https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

• Problem regarding content previously highlighted when you view the file in Acrobat DC.

  I have a problem with the content previously highlighted when you view the file in Acrobat DC. There is no problem in earlier versions of Acrobat. I pointed out the portions many documents with a point culminating opacity 50% and now shows the text in black and white and highlighted portions are not readable. This only became an issue when I recently installed Acrobat DC. The system is Windows 7. Y at - it a setting I need to select to make the text readable again?

  To change the color and opacity of the commentary on the matches of the current document, you can use script below.

  Note : this script will replace the opacity settings and the color of all the comments of highlight for PDF files open. Please save documents before store you settings to highlight comments. This script can be used until a fix is available.

  Steps to follow:

  1. open all PDFs in Acrobat DC comments are present in the games.

  2. press Ctrl + j

  3. in the lower part of the text, copy the Script below.

  4. Select all of the text copied in the previous step, and then press Ctrl + Enter

  5 opacity of all comment games goes to 100% and change color to light gray.

  *******************************************************

  var hightlightColor = color.ltGray;

  var highlightOpacity = 1.0;

  DDP = app.activeDocs;

  for (docNum = 0; docNum)< pdd.length;="">

  commentArray = DP [docNum] .getAnnots ();

  for (i = 0; i< commentarray.length;="">

  If (commentArray [i] .Guy == "Highlight": game commentArray [i] == "HighlightNote") {}

  commentArray [i] .opacity = highlightOpacity;

  commentArray [i] .strokeColor = hightlightColor;

  }

  }

  }

  **********************************************************

  You can change the opacity (highlightOpacity in above script ) for any value between 0.0 and 1.0, where 0.0 is transparent and 1.0 is opaque.

  Some possible values for the highlight color (hightlightColor in above script) are: color.blue, color.cyan, color.yellow, color.gray, color.magenta, color.red, color.green.

  Rohit-

• How to get a list of options (excel applications such as the browser, etc.) when you view the simultaneous release of request?

  How to get a list of options (excel applications such as the browser, etc.) when you view the simultaneous release of request? Profile options to define?

  Discovered that in order to get the display options, it must implement the system administrator--> Install--> the Display Options Display Options

• When you view the page in a browser, the sides were white bands, what to do?

  When you view the page in a browser, the sides were white bands, what to do?

  

  The embedded html code seems to create this problem. Try to remove only once and check.

• message comes up saying "message has not been downloaded" when you try to read messages that have been read many times before

  Trying to open the "view all images" of an e-mail he suddenly flashed up "message has not been downloaded. I read the post before but not asked to show images.

  Hi FinYo,

  What mail client do you use? Outlook, Windows Live Mail?
  You can try to take a look at the following articles for Outlook:
  http://support.Microsoft.com/kb/843018
  http://Office.Microsoft.com/en-us/Outlook-help/turn-off-blocking-automatic-picture-downloads-HP007310739.aspx
  For Windows Live questions please visit these links:

  Windows Live Mail

  Windows Live Hotmail

  Hope these helps.

• Automatically connect to the secure area when you submit the registration form?

  Is it possible to automatically open a session someone in a secure area when they finish the web registration form?

  We have created a web form that adds users to a secure area and we have redirected this form to our secure area desired landing page.  However, the landing page is promting the users to enter their login before information it will display the page.  Is it possible to automatically open a session in the secure area when they support the registration form (so that they automatically see the content of the page without having to connect)?

  Thank you

  Jason

  Hi Mario,.

  Thanks for your quick response.  I found the problem.  I am using a subdomain and the registration page as the start page for the subdomain.  For some reason, BC did not like this.  When I went directly to the page, it worked fine.

  -for example, when I went to the trituns.com/testregstration.html page, everything worked well and I could record and see the secured information.  (FYI - these aren't the actual URL - examples)

  -However, if I tried to go to testreg.trituns.com with the testregistrationl.html page to set as the start page for the subdomain, the system would allow me to fill in the electronic registration form and add me to the secure area, but it would not open automatically log me into the secure area.

  - As a work-around, I created a new redirect page that is the start page for testreg.trituns.com that takes people to the page complete trituns.com/testregistration.html.  ... This isn't an ideal solution, but it seems to work for now.

  Thank you

  Jason

• Menu mobile with accordion panel will not open when you view the phone's browser

  I'm designing a sensitive site using breakpoints to 320, 768 and 1200.  I made a menu mobile with a panel of the accordion for breakpoints to 320 and 768.  Everything works fine with the reactive site on the web browser, except when I open the menu mobile on my windows phone, the Panel will not open.  When I press the menu to open it, the menu quickly opens and then closes immediately.  I was not able to understand what it takes to keep the menu open on the Tablet and phone version.  Any help would be really appreciated.

  [Transferred to the specific forum - Mod]

  OK first off I can confirm that the accordion on this page works on Microsoft phones (Nokia) and my iphone 3

  However the site is a mess to navigate and IMO the design must be less congested to operate on a phone... tip, do not use a desktop computer to test your phone designs

  

  with regard to the drawings and models responive. Take a look at these

• Get the error message 'connection of diagnosis problem' when to access the Ebay.ca site

  Original title: I was not able to connect to EBAY.CA for weeks.  It is continually unable to establish the connection.  Why?

  I've never had a problem connecting to this web site.  Just type in ebay.ca and it happens.  No more.  Whenever I try to connect this page comes to diagnose the problems of connection but only to that particular web site.  What is going on?

  Hello

  1 which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  3. What is the exact error message to diagnose connection problems?

  If you have Internet Explorer, perform the steps from the link.

  Can't access some Web sites in Internet Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information helps.

• Message box color settings disabled when you use the dialog "Windows color and appearance".

  When you use the configuration dialog box 'Window color and appearance', why are there color settings invalid?  I want to remove the default 'Pastel Pink' value that I find unacceptable.

  I can switch to "Classic Windows" that uses no pastel pink color, but "Classic Windows" does not support "Aero Peek", and the windows look pretty tired.  You can only take "Classic Windows" for many years.

  Color settings are disabled for: buttons, Message box, title of Palette, scroll bar.

  Help, please!

  Me too I'm frustrated by that.   Found the old windows with very honest XP environment.   I used the advanced settings, but has not found a way to save the changes with a label, so I knew that the changes you made.   It is just Frigging trial and error and very frustrating.

  Why are there no way to return either to the default value (not found a default label) or save the settings changed under a name?    It is a productivity KILLER.

  Hello

  Interface user of Windows 7 is theme based. The colors are defined by the theme.

  You still have many color options that can be used to change the colors.

  Right click on the desktop and select Personalize. Click on the color of the window at the bottom of the window box.

  You can select one of the colors in the boxes colored at the top.

  Adjust the intensity of the color with the cursor.

  Click on the color down mixer and you can a lot of variations on all the different color choices.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• iPhone 6 s is not wake up when you remove the cable from the charger.

  Hi all.

  I noticed that sometimes my iPhone didn't wake not (the lock screen display) when the charging cable is removed. the charger / sync port seem otherwise works normally.

  Is this normal?  I'm guessing that this happens because sometimes when the battery is fully charged, no power goes to the phone and if you pull the cable then, the phone can't tell you have removed the cable, but I have not seen this happen on my previous phones.

  Thank you!

  Yes, this sounds like normal behavior! On my iPhone 6, when it reached 100% of their capacity and is completely loaded, as it stops in charge, which is why when you unplug the iPhone from the charger the screen does not automatically wake up, because the charger stopped output power to the iPhone when it finished filling. I hope that answers your question!

• I get the message "files for the recovery diskette could not be created" when you use the backup utility. Why?

  I was using the Backup Wizard, backup all info on the computer to an external hard drive and insert a diskette in the drive.

  Hello

  · What is the edition of windows that you have installed?

  · What is the service pack installed?

  Try the steps listed in the link below: year Error Message is displayed when you try to use the Automated System Recovery Wizard: http://support.microsoft.com/kb/302700

• HP envy 5532: message key not valid error when you try to download the software

  I can't download my desire 5532 keep getting error message (key not valid for use in specified state).

  This problem is related to Microsoft Update KB2918614

  The solution is to remove this update.

  How to remove an update for Windows Vista

  If the fix works, I recommend that you 'hide' it so that it not be reinstalled automatically.

  Instructions below:

  If you don't want Windows to install an update, you need to hide.

  1. Open Windows Update by clicking on the button start . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click Find updates.

  3. When Windows finds updates for your computer, do one of the following:

     • Click the link that tells you important updates are available if you have some updates to hide.

     • Click the link that tells you optional updates are available if you have optional updates to hide.

  4. Do right click the update you want to install, and then click Hide update. The next time you check the updates, the update will not be automatically selected or installed. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.