message "Could not reconnect all network drives" is an error

Similar Questions

• Could not reconnect all network drives

  My laptop is getting the message "Could not reconnect all network drives", at startup. I'm running Windows XP, service pack 3. I have a 'Z' allocated network drive, which is marked 'memory_card '.

  Must this drive be connected?

  If so, what are the steps.

  When I try to open this network drive, I get the message "an error has occurred during reconnection 'Z' (: to \\HP(serial number) \memory_card'."

  Thank you

  All of this makes sense now.

  Thanks for your help and happy new year!

  C1

• Could not reconnect all network drives in Vista...

  On startup, I get the message, form the notification area: "Could not reconnect all network drives.".  How to connect readers.  I have an Epson printer connected.

  Hello

  (1) what firewall are you using?

  You are connected to a Modem/Router? If so have them turn it off for 30 seconds and turn it back on.

  Let us know if that helps.

• Could not find the network driver: PCI\VEN_14E & DEV_165F & SUBSYS_2133103C & REV_00

  I can't find a driver for a Proliant Server network:

  PCI\VEN_14E & DEV_165F & SUBSYS_2133103C & REV_00

  Hello:

  You are missing a character description of the seller.

  However, my guess is that you need the driver there is the Broadcom NetXtreme Gigabit Ethernet card which has an ID PCI\VEN_14E4 & DEV_165F.

  If HP does not list the driver on the support page for your particular model server, here is the link to the generic drivers of the BCM for this ethernet model.

  The first or the second pilot is probably one you need (32 or 64 bit depending on the case).

  http://www.Broadcom.com/support/Ethernet-NIC-NetXtreme-i-server

  You will need to manually install the driver, because I do not think that these are executable files.

• WINPE GIVES THE MESSAGE 'COULD NOT LOCATE 2 HARD DRIVES. WHY?

  recovery d uring the script or wnpe gives this message. Why?. c is locn. 0 and d is locn 1. pls help.

  also in the bios update. I have done inadvertendly f.13 instead of f.1b. I also did for both uefi. This messed up my bios. the the bios boot updt for any function except memmory test does not work. How to put the origin of the f.1b bac k bios? restore the bios also fails. help pls thx. Kris;  b and windows do not work

  Hi kris999,

  Thank you for your message.

  I understand the bios update failed and the rear roller. You should not able to install an incorrect bios, so I don't know what happened.  You said that the restoration has failed, then I suggest that you call the HP Technical Support.  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.  The HP Technical Support site map

• How to reconnect all network drives?

  the network location and the State of my network disks.
  It shows that wsusoffline.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

  Hope this information is useful.

• My cloud of Adobe is not updates. The message: "could not update the Office of creative cloud (error code: 2)" can you help me?. Thank you.

  Cloud of meu nao esta recebendo atualizacoes Adobe. Appears a mensagem: "da of atualizacao Falha na Creative Cloud Desktop (erro code: 2)" Voces can me help?.»» Obrigado.

  Please try: error code 2 or 50: failure updating Creative Cloud desktop app

• on startup, I get the message, unable to connect to all network drives

  at startup I get message (unable to connect to all network drives) I use windows 7, intel i3, 64-bit and ie9.

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Method 1: Perform the steps from the link below and see if it helps.

  Programs may be unable to access some network locations after you turn on user account control in Windows Vista or in Windows 7

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Method 2: Click on the link below and see if it solves the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Networking/cannot-reconnect-all-network-drives/5c5a4492-1634-4479-91f9-b4d2763b31d2

  Hope this information helps.

• Cannot install Skype - Message: «could not access network %APPDATA%\protector.exe location»

  When I try to install Skype install, I get this message 'could not access the %AppData%\protector.exe network location.

  The instructions in the link below has helped a couple of Skype users. Give it a shot:

  http://www.gracecentered.com/christian_forums/computer-assistance/Skype-install-error-1603/

  http://Forum.Skype.com/index.php?showtopic=769863

  Uninstall and remove all traces of Skype before installing the new version. Remember to remove all temporary files on your computer too.

  Instructions to uninstall:

  https://support.Skype.com/FAQ/FA10634/how-can-I-completely-uninstall-and-then-reinstall-Skype?FromPage=search&q=uninstall+Skype&fromSearchFirstPage=false

• How to return to the line. Try using Firefox this AM. All I get is an error message "could not load the XPCOM.

  PC is several years old running Windows XP, but was working OK yesterday. This morning could not get Firefox at startup, only the error message "cannot load the XPCOM.

  Do a clean reinstall, delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  https://www.Mozilla.org/en-us/Firefox/new/

  Uninstall your current version of Firefox, for cleaning of the Windows registry and the settings in the security software.

     DO NOT  remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
  

     It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
     http://kb.mozillazine.org/Uninstalling_Firefox
  

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

  * Original title: installation of windows 7

  I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

  Try to reinstall.

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• Error 1606: 'could not access location network & AppData%.

  Please help with Error 1606, "could not access location network & APPDATA%\.»  Can someone please provide a fix?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.