Message error "another sellers application is controlling the wireless adapter.

Similar Questions

• ConfigFree: windows pop up message: sellers application is controlling the wireless network adapter

  Hello

  When I draw a line from nearby wireless networks (with or without WEP security) to the laptop in the middle icon,
  a popup message with the text: the provider application is controlling the wireless card.
  Does anyone know what this message or where I can get the answer to this question?

  After clicking on it you may see far (only the 'ok' button is available), the connecting line with the laptop wireless network disconnects after
  a few seconds.

  Thanks a lot for helping me...

  Hello

  In my opinion this message appears because a 3rd WLan utility configures and controls the WiFi connection!
  There are different possibilities:
  The laptop uses the Intel wireless network adapter and the Intel Proset utility configures the WLan
  Or
  The laptop uses the Atheros WLan card and Atheros Client utility configures the WLan
  Or
  The windows have the option has been enabled and do this job.

  In this case ConfigFree application cannot configure and control the WiFi connection!

• Message: Sell another Application is controlling the wireless adapter

  Does anyone know how to move from one devices (using Configfree) to another wireless? A window opens and reads 'request to sell another control the wireless adapter.

  How do I changed the setting so I can connect to the device that is controlled?

  Thanks, Flopyear

  Hey,.

  To be honest I really don t know what you mean. What is wireless?

  What program tells you this information?

• ConfigFree is unable to control the wireless adapter

  Hi I have a problem
  I have two routers in my house
  the connection is interrupted frequently, one router to another
  I tried to disable the device windows wireless, then configfree shows a msg that asked to another provider controlling the wireless card,
  I don't know how to solve the problem
  my laptop model is M70

  hope you help me
  concerning

  Hello

  AFAIK ConfigFree tool is created for the monitoring of LAN and WLAN connections and not command or with the same configuration. To configure your WLAN, you can use the standard Windows WLAN settings or another application, designed by the manufacturer of the WLAN card like Intel Proset Wireless software (probably preinstalled on your device). If you use Intel created a software, you should disable the WLAN Windows option and it is very important.

  Please test a little more exactly and I hope you find the optimal configuration for your WLAN.

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

  I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

  My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

  This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

  Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

  No difference. Always the small icon with Red Cross barred through it.

  I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

  Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

  Thanks for any help I receive.

  > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
  After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

  One last thing:
  > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
  What is the difference between the old and the new installation of Windows?

  In general the WLAN use is fairly simple.
  Wireless network card - must be installed correctly (listed in Device Manager
  WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
  -scan the available WLAN networks area, click on the button of your WLAN and use connect
  -put key WLAN if necessary and after a few seconds WLAN connection will work

  I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

• Unable to connect to the wireless adapter should use LAN

  another computer or a laptop can use the wireless adapter, but one of my knees can't connect to it. I have to use the LAN cable

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye

• HP ENVY x 360-15-u110dx: reset the wireless adapter

  I have a new HP ENVY x 360-15-u110dx and it is not connected to the internet. I have to constantly reset the wireless adapter. What should I do to fix this?

  @pjg31660,

  Hello and thanks for the display on the HP support forums.  Here is a link that should help you solve your problem.

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• When I run the program I get a message "error loading C:\windows\dhax40.dll the specified module is not found.

  I have Windows XP service pack 3.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  A Google search on the name of the file means no "hits" which makes things even more suspicious.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
  .  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Trying to open the email notifications Facebook I get: runtime error! This application has requested the execution to terminate in an unusual way.

  Vista Home Premium

  WLM 2011

  Windows updates as of June 25, 2011

  Pop-up window reads as follows:

  Runtime error!

  Program: C:\Program Files (x86)\WindowsLive\Mail\wlmail.exe

  This application has requested the execution

  terminate in an unusual way.

  Contact the application support team

  For more information.

  After that I closed the window, I can not open Windows Live Mail 2011.  Then, I get the following error:

  Windows Live Mail could not be started. Closure of Windows Live Mail.

  Your calendar contains corrupt data that forcing Windows Live Mail

  to close.

  (0x8000402A)

  Hi paulrivera,

  For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.
  Windows Live Forum - http://windowslivehelp.com/product.aspx?productid=15

• Message error "access to this place or the content is limited.

  Hi, I get this message:

  "Access to this site or the content is limited. If you think that there is an error, contact your administrator or the person who directs you here. »

  when I try to access a link in the e-mail to "community-admin [[email protected]]"

  Subject: [stock items (APC/PLM/PIM) - EBS (MOSC)] - inventory on-site validations [1ky9kt-120u0-7knu1]

  Link: https://community.oracle.com/message/12721321?et=watches.email.thread#12721321

  It worked fine yesterday, but today it does not work. I can always connect on MOS but when I use the search tool it and include the community, I get the same message for the community tab.

  Can someone direct me please the people correct to speak with for that this is resolved.

  Thank you
  Sean

  This problem should have been solved now. We did hit a permissions problem that has now been corrected.

  Mike

• How to activate windows Filter Manager norton (error message3039 65553) how to fix the driver to switch the wireless adapter

  Error message from Norton 3039 65553 filter manager not lit

  Disconnected Error Message wireless adapter

  IMO, this kind of response is yet another reason to remove all Symantec software 'security' of your computer.

  As far as I know, Microsoft Windows Filter Manager is software that is designed to be used by third-party developers (it is in this case Symantec) for simply integrating their software in Windows.  It is not controlled by the user.

  That said, it is possible (no guarantee) If you provide information in Event Viewer that relates to the crib of filter, someone here may be able to help.

  • Open the event viewer (start > run > eventvwr > OK)
  • Look in the Application logs and system warnings and errors
  • Double-click a warning or an error of knowledge (properties)
  • If the Filter Manager produces an error, it will probably be in the system log
  • When (if) you find an entry that relates to the Manager of Windows filters, click on the "copy" icon in the properties of the page (just below the up/down arrows) and paste the information into your answer here "

  But you should consider seriously really get Norton Removal Tool and Norton replacement with something else.

  Microsoft Security Essentials is a good free antivirus solution and eSet NOD32 Antivirus is a good business idea.

• On my iMac running training camp. I get a message saying that my PC cannot find the wireless hub and it is unable to connect to internet Explorer. Help!

  Connection Wi - Fi with internet explorer 8

  I'm under Boot Camp on my iMac with OS 10.6.8. I am connected to the hub of my son-in-law over a wireless connection.  I can access the internet using Safari on the side of the Mac of the partition successfully, but I can't access the internet by using a wireless setup on the side of the PC of the partition by using Internet Explorer 8.  I get a message saying my side PC created by Boot Camp can not find the wireless hub and is unable to connect to internet Explorer.  Help!

  Hello

  ·          What is the version of the operating system running on your computer?

  I suggest you to install the drivers for the network card on the manufacturer's Web site and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Provided the driver for the wireless adapter is unable to install DW1550

  Hello

  I just reinstalled Windows 7 Home Premium 64 - bit on my Alienware X 51 R2, and I made sure to follow the order of installation of driver found here: http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=gen&docid=268873

  However, when I tried to install the driver provided on the Dell Support Site for the wireless Dell 1550 card wireless network, the installation fails systematically. I've included the output of the log below:

  [06/07/14 14:51:28] Update the Package execution started
  [06/07/14 14:51:28] Original command line: ' "E:\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01."» EXE ".
  [06/07/14 14:51:28] DUP Framework EXE Version: 3.0.93.1
  [06/07/14 14:51:28] DUP release: 4R14JX00-00
  [06/07/14 14:51:28] Setting initialization...
  [06/07/14 14:51:28] logo.png
  [06/07/14 14:51:32] The user command: participated in
  [06/07/14 14:51:32] DUP of capacity value: 39845887 (0x25FFFFF)
  [06/07/14 14:51:32] DUP of the vendor software version: 9.2.0.514
  [06/07/14 14:51:32] Local model/system Compatible with this package? Yes
  [06/07/14 14:51:32] Local system OS version: 6.1.1.0
  [06/07/14 14:51:32] OS Compatible with this package? Yes
  [06/07/14 14:51:32] Local system OS language: EN
  [06/07/14 14:51:32] Language is Compatible with this package? Yes
  [06/07/14 14:51:32] Identified behavior: participated in
  [06/07/14 14:51:32] The payload temporary log file name: C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01\DUP815F.tmp
  [06/07/14 14:51:32] "Translated from command line: Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01\DUP815F.tmp.
  [06/07/14 14:51:32] Path: C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01
  [06/07/14 14:51:32] Identified behavior: participated in
  [06/07/14 14:52:13] Add the software provider Log: C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01\DUP815F.tmp
  [06/07/14 14:52:13]
  -Beginning of the software vendor log-

  [06/07/14 14:52:13] ASCII log file load detected.
  [06/07/14 14:52:13] [2014-6-7 14:51:32] Installation start up.
  [2014-6-7 14:51:32] Command-line is:[/LOG"C:\ProgramData\dell\drivers\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01\DUP815F.tmp"]

  [06/07/14 14:52:13]
  -End of the software vendor log-

  [06/07/14 14:52:13] Software provider return Code: 7
  [06/07/14 14:52:13] logo.png
  [06/07/14 14:52:13] Code name of output: ERROR
  [06/07/14 14:52:13] Exit code value: 1 (0x1)
  [06/07/14 14:52:13] Result: FAILURE
  [06/07/14 14:52:18] Open file: C:\ProgramData\Dell\UpdatePackage\Log\X51-R2_Network_Driver_4R14J_WN_9.2.0.514_A01.txt

  I also noticed that the Setup application lists the driver as being of "Dell DW1506 WLAN 802.11 b/g/n.

  I thought that the incorrect model number was weird, but maybe it's something the programmer neglected during the compilation of the installer?

  Any help would be appreciated!

  Hello!

  The current driver for this wireless card is version: 6.5.1.4400, A00, so I think that you have downloaded the wrong driver. Try to install from this link.

  For later use, I recommend that you use this article for instructions on how to install the drivers.

  Let me know how it goes!