message error "clc.exe has stopped working".

When I run Photoshop I get a message error "clc.exe has stopped working".  I have the latest version of the drivers for my Acer X23H and HP 2311 LCD monitors so their upgrade is not possible.  Is there another difficulty, that I can try?

For a temporary solution, you can disable opencl.

Preferences > performance > the GPU settings > advanced settings > Opencl - uncheck opencl.

Tags: Photoshop

Similar Questions

  • Development in error "Installer.exe has stopped working" while installing the new modem.

    Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

    Log name: Application

    Source: Application error

    Date: 2010-01-03 02:04:50

    Event ID: 1000

    Task category: (100)

    Level: error

    Keywords: Classic

    User: n/a

    Computer: Monica-PC

    Description:

    Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

    The event XML:

    1000

    2

    100

    0 x 80000000000000

    309

    Application

    Monica-PC

    Installer.exe

    0.0.0.0

    4b 208462

    Installer.exe

    0.0.0.0

    4b 208462

    40000015

    0002efec

    ADC

    01cab8b5797299e1

    Hi Tonio saini,.

    Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

    You can also check the following link, try the suggestions and check if that helps:

    http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error: regedit.exe has stopped working

    I had to reload my OS I had problems, now when I try to load the printer (I tried 2) it comes up with 2 errors - Regedit.exe has stopped working and the communication of the printer does not work.

    If I type regedit in the search menu and then click on the file that displays the error next poster: THE APPLICATION FAILED TO INITIALIZE PROPERLY (0XC000007B). CLICK OK TO CLOSE THE APPLICATION. The software of the printer seems to be there, but nothing will print.  Can you please tell what can I do to fix this?

    If this is the case:

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

    They will help you with your question in Forum Vista programs at the above address.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error message receiver: alidiskviewer.exe has stopped working when you insert a cd with medical images

    Original title: alidiskviewer.exe has stopped working

    I have inserted a cd with medical images on this subject and received this message. What is a windows or another problem. I ran the diagnostic of fix - it, but this did not help.

    Hello

    This can happen if the file is not compatible with Windows Vista.

    Have you tried the steps by Marilyn O, moderator of the Forum in the previous link to use the compatibility mode of the previous link?

    If you are always faced with the question, then you can search the Alidisk Viewer option in programs and features and even uninstall and check.

    For more information, you can read the following article to uninstall the program.

    Uninstall a program

  • Microsoft error message "R003. EXE has stopped working and was closed ".

    Anyone know what this means?   Microsoft Windows 'R003. EXE has stopped working and was closed "it doesn't affect my computers operation at all.

    Discussions were merged.

    Deleted duplicate.

    I just found this while trying to get the answer. I gave him a shot and think that it does the trick.

    http://malwaretips.com/blogs/default-tab-search-bar-removal/

  • How to install a driver for f4500? Error dot4_plugin.exe has stopped working

    I had this printer HP Desk Jet F4500 connected to my computer laptop operating system windows 7 64 bit for months now, the printer has no drivers and I can't get them.  I went on HP website and downloaded the base and the recommended full downloads and still the same error Stops the installation.  dot4_plugin.exe has stopped working the extent of attributes are inconsisitent.

    Help I am more than two hours in this and don't know where yet.

    I did some additional research on this issue, more specifically the error 'extended attributes are inconsisitent' and found that this seems to be a Windows problem. Here are a few things you can try to solve the problem:

    Method 1: Perform a scan of the file system (CFS) checker on your computer

    Steps to use the SFC/SCANNOW command:

    1. click on start-> click on all programs-> click Accessories-> right click on command prompt-> Select run administrator-> click on continue
    2. at the command prompt-> Type "sfc/scannow"-> press enter
    3. follow on-screen messages to start the analysis of the system (this process can take a long time)
    The following will happen:
    Start of the phase of verification of the scanning system of-> % of full audit.
    4. once the analysis is complete, you will see a message with one of the following:
    a. not found any breach of integrity
    b. find corruption but repaired
    c. corruption that he couldn't fix

    Method 2: System Restore will take your PC to a previous state when the PC worked.

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start-> Type "System Restore" in the box start search-> click System Restore listed programs.
    Type your password-> click continue (if you have one)
    2. in the dialog box the system restore-> click on a different restore point-> click Next.
    3. in the list of restore points-> click a restore point created before you started having problems-> click Next-> click Finish.

  • I get the message AIOC. EXE has stopped working how to fix this

    How can I fix my system that aioc.exe has stopped working

    Hi Neil,

    Thanks for the reply.

    I need a little more information of the computer with the problem. Please help me answer the following questions:

    (1) what is the brand and model of the printer?

    (2) which toolbar is installed on your computer?

    (3) you are able to print after receiving the error message?

    (4) you have problems with the normally another impression of the toolbar?

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  • Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

    There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

    Very grateful for any solution for every problem!

    I am running vista.

    * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

    Hello

    1. don't you make changes to the computer before that happened?

    2. Once you get this error message?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

    http://support.Microsoft.com/kb/929833

    Method 2:

     Also try to set up your computer in a clean boot state, and check if the same issue occurs.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Method 3:

    Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Hope this information is useful.

  • Error 'setup.exe has stopped working' when installing Quicken.

    Original title: setup.exe has stopped working

    I have read through the related forums and don't think I've seen a solid answer to this problem.  I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2.  (Long and ugly tells how he got deleted at first - thank you, Intuit).

    When I try to install Quicken, I get the above error message.  I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.

    I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation.  What is a corrupted registry and I have TO run third to fix?  Is it a bug of Vista - is there a fix of bug for her?

    I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments!  Help, please!

    Hey, Keenon,.

    Please, remove all existing components of Quicken from the computer and do a fresh install.

    Step 1: use QcleanUI uninstall Quicken

    Follow the instructions in the article below for more information on how to use this tool.

    The use of QcleanUI to uninstall Quicken


    Step 2: Install Quicken

     

    Refer to this article for installation help.

    Installation of Quicken on Microsoft Windows 7 or Vista

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 error: "5487992.exe has stopped working".

    I have a Windows 7 machine and I started getting the following message: "5487992.exe has stopped working". The computer will function normally after you close the error for about 5 minutes, how the machine gets to the login screen. If I log in as usual I receive the same error message and return to the display of connection in 5 minutes again.

    I searched this error message and don't have wonder no results found. Any help would be greatly appreciated.

    Thank you

    Mike

    Hi Mike,.

    Thanks for posting your query in Microsoft Community Forum.

    1. You did it any significant hardware or change software on the computer before this problem?
    2. It happens when you navigate to a specific application? If so, name the application you initiate.

    The causes of .exe error messages can vary considerably. However, most of the .exe errors result from a corrupted or damaged file ntdll.dll version itself, corrupt hardware drivers, or issues between Windows and other programs.

    I would suggest trying the following methods and check if the problem persists.

    Method 1:

    Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

    If the problem exists, try the next method.

    Method 2:

    I suggest you to perform a file system (CFS) Checker scan to check the alteration of system files.

    1. Go to Start, click all programs and open the Accessories.
    2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
    3. In the command prompt, type the following command and press ENTER:
      sfc/scannow

    For more information, refer to this link:

    Use the System File Checker tool to repair missing or corrupted system files

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

    Bootstrapper.exe has stopped working!

    Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

    I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

    All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

    Thanking you in advance,

    stillcrazyat49

    Hello

    1. have you made changes to the computer recently?
    2. the program is already running while update you?
    3. where did you download this update?
     
     
    Method 1.
    I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
    May be a third party application is causing the conflict.

    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

    Method 2.
    If the problem persists, it is recommended to contact Garmin support and check.
    http://www.Garmin.com/Garmin/CMS/site/us/support/
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I / card reader Omega receives an error 'DitExp.exe has stopped working ".

    After trying to install the driver, without success, for an I / Omega card on every start reader, I get a window saying "DitExp.exe has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is found. »

    Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and download, install and run Autoruns and go to the tab all.  Check the list for an entry including DitExp.exe or your card reader.  Remove the box in front of the entrance, click OK and restart.  The message should appear is no longer.

    If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

    Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

    I hope this helps. Keep me posted.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • After you install torchlight 1, my PC stops several times and gives an error "torchlight exe has stopped working".

    Hello, I recently bought torchlight 1 for my pc, Windows 7/Vista. Ive had my pc stop repeatedly. I contacted technical support of Torchlight, sent files Dxdiag and msinfo, after reviewing, the suggested running in safe mode, but, after having tried 2 times, each time, got a dialog box stating "" torchlight exe has stopped working '. " When I send a tech, their eval was as follows:

    Looks like it's a question of system rather than a question of the torchlight.  I say this because, as the game has been started in SafeMode only the windows system files are loaded into memory.  So, when Torchlight.exe attempts to access these files with torches can not due to a problem with your file system.  At this point, the only options are the following:
     
    (1) create a new user profile and attempt to play the torches of this new profile.
    (2) depending on how long it's been since your last windows installation costs, you can try to repair windows to resolve any system problems of files or reformat your PC
    (3) contact the Support technology Windows to help your application for stay of troubleshooting problems.
     
    Using technicians on site for your comments, is their a problem with my Windows 7?

    As torchlight works perfectly on my Windows 7 x 64 laptop, I suppose that "it is a question of system rather than a question of the torchlight", too. Especially when your system shuts down instead of simply display a message on a program "stopped working", brings us to this conclusion.

    The most common causes for a corrupt Windows are "optimizers" of sorts (registry cleaners, etc.), the over-zealous antivirus programs and incomplete software installations. This can affect your overall performance of the system, not only the proper functioning of a game, so reformatting/reinstall or restore an unchanged system image from backup may be the safest advice.

  • Cannot run Lenovo System Update error tvsu.exe has stopped working

    Original title: tvsu.exe has stopped working

    When I run it on my WIn7 64 bit notebook Lenovo System Update v4, I get the following:

    TVSU Application has stopped working

    A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

    I called Lenovo and they say it's a Windows problem. This message looks like a standard message for a particular type of problem. Ideas for a solution?
    Thank you

    Thanks, Eddie!

    I've been reluctant to use these registry cleaners too but had no choice. They well with basic cleaning after uninstall. It is heartbreaking how reckless SSII is during the cleaning of the registry during the uninstallation of their software. And some of the best cleansers will warn you if a fix is dangerous or not you can not run it. But what sometimes happens is that vacuuming can cause two problems for everyone that it fixes if you aren't careful.

    I'll try to post on the site you posted. I'll post here if it helps.

  • Get error "ggsci.exe has stopped working" after the upgrade of OGG 12.1.2.0.0

    Hi gurus of the Oracle,.

    I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe

    ggsci.exe has stopped working

    If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)

    1. stop all processes Ogg

    2. has taken the old OGG home backup

    3. call the YES program and gave the location of the OGG existing House 11 G

    4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.

    GGSCI_ERROR.JPG

    If someone has solved this problem. Please help me.

    Best regards

    Jamsher Khan

    I strongly suggest to talk to support.

Maybe you are looking for