Message error "Windows cannot create the network map.

Similar Questions

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• message error "windows cannot access the specified device path or file.

  After updating all upgrades of Windows and restarting my computer, I get the error message "windows cannot access the specified device path or file" on all my programs. I tried to go to the 'system restore', but it won't let me access that is. I am running Windows XP on a Dell Vostro 400

  Tried to start the restoration of the system from the Windows Advanced Options menu and he tried to restore from the last successful boot - unfortunately the last successful upward included the problem start

  Restarted in safe mode and not run Chkdsk/r - no found error - problem persists.

  Finally found my Dell operating system disk and went into the Boot Menu at startup screen and set it to Boot from the Dell operating system CD

  After the CD started, I went to reinstall Windows, and he gave me an option for repair

  The relocation process took about 30 minutes to complete, but he reinstalled all missing or damaged files that were the cause of the problem

  Fixed a problem!

  Thanks Mike - You're on the right track!

• Can't install downloaded software, receive the message error "Windows cannot access the specified device, file, or the path"

  Cannot install any software downloaded - says "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.  This happened after I went on a bad site and downloaded something accidentally and I was not able to do anything after that.  I have avast and avast kept popping up saying I've made to a site with malware and that it would interrupt - well these pop - ups have ceased and I was scanning my computer using windows defender (which did not find anything) - but I still have problems on my computer. Should what steps I take?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Message error "Windows cannot find the file.

  I was doing some renaming and reorganizing my music folder, and now when I go to play, say, in front of playlists, I get the error that it cannot find my files. I didn't delete these files and I'm confused. Help?

  Hi Birnbaum,

  ·         What version of Media Player do you use?

  ·         You are able to locate the same file on the hard drive?

  Erase the database of Media Player and look for the question. Follow these steps:

  1) click Start, run, type %userprofile%\Local Settings\Application Data\Microsoft\Media Player , and then click OK.

  (2), select all the files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  (3) restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  (1) Windows Media Player output.

  2) click Start, run, type %userprofile%\Local Settings\Application Data\Microsoftand then click OK.

  (3) select the folder Media Player and then click on Delete on the file menu.

  (4) restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  For reference:

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

• When I perform a net view on, I get the error system error 51 next. Windows cannot find the network path.

  Net 51 with a view system error

  I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.

  However, when I perform a net view on, I get the following error

  51 system error has occurred.

  Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.

  How to make this command work?

  Hello

  ·         Your computer is on a domain network?

  Follow the steps in troubleshooting this article and check if that helps:

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP

  http://support.Microsoft.com/kb/318030

  See also this article that resembles the same error.

  Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."

  http://support.Microsoft.com/kb/259878

• Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

  When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

  Where can I find the required file?  It is available from Microsoft to download?

  Thank you

  It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

  Register various fixes for Windows 7/XP/Vista:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• Vista cannot create a network map

  the two 2 computers running Windows Vista Edition Home Premium.  Network and sharing screens put in place identical.  On my computer (from the network and sharing Center), I can click on view full map and it shows my network card.  On the computer of my wife (of the network and sharing Center) she can click on view full map and it rises "Windows cannot create a network adapter for the selected type of connection networl.  I might add that both computers are 'wired' internet/router.

  Any help?

  Hi Duane_TN,

  Are your computer and your computer wife have chipset or card network NVIDIA perchance? or a Linksys router by chance?  This is a post in the forum of Linksys, you might want to check in to see if it applies to your computers:

  Symptom: Windows Vista computers are not put on the Vista network map. Or well, you get the following message when you try to view the full network map: "Windows cannot create a network adapter for the type of connection chosen network." To check go to: PANEL-> CENTER NETWORK AND SHARING. SEE the FULL map (top-right) and find either: A Windows Vista-based computer is listed down under: "the following peripheral discovered may not be placed in the plan. or You get the message, "Windows cannot create a network adapter for the type of network connection. Possible cause: The offending computer has an NVIDIA nForce Networking Controller whose property "priority and VLAN" to "priority"active & VLAN. Solution: Set the property 'priority & VLAN"to"Priority and VLAN Disabled"as follows: Reach: START-> CONTROL PANEL-> ADMINISTRATION-> COMPUTER MANAGEMENT TOOLS In the resultant "computer management" window select: DEVICE MANAGER (left side). "NICs" (right). Expand "Network adapters" and see if it lists a NVIDIA nForce Networking Controller. Right click on 'NVIDIA nForce Networking Controller' and select 'properties '. In the resultant 'NVIDIA nForce Networking Controller Properties' window, select: "Advanced"(tab) ". Under the list of the 'properties', select 'priority & VLAN. for 'Value' assign ' priority and VLAN disabled. References: ---------- How to get the Vista network map works on nVidia MB http://www.TechIMO.com/Forum/networking-Internet/197756-how-get-Vista-network-map-working-NVIDIA-MB.html Other things to check: Update to the latest version of the driver (65.7.4.0 works for me). Article referenced above indicates a previous driver may be bad.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.»

  Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• Error: "Windows cannot verify the digital signature for the drivers required for this device (Code 52)"

  Original title: Wireless cannot verify the digital signature for the card driver from son - after an automatic update of the software.

  We downloaded an automatic update of our HP Pavilion laptop running Windows 7.  This disabled somehow the wireless network adapter.  Readings of the error; "Windows cannot verify the digital signature for the drivers required for this device.  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that might be malicious from an unknown source. (Code 52) ».  We tried 2 system restore - problem persisted.

  I solved this problem to roll back the driver to that before the driver that is currently installed.  The wireless activated immediately when done.

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

• Error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Original title: Audio recording sound recording microphone

  Hey, if I get this message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  When I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff

  There are several models of m6 ENVY

  ENVY m6 -?

  This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)
  This is a link to the HP support site to download drivers

  And this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problems

  Looks like something to remove the registry entries for the driver

• Often, I get the message error "Firefox cannot find the server.

  Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.

  I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s

  See also:

  • http://KB.mozillazine.org/Error_loading_websites
  • https://support.Mozilla.com/kb/error+loading+Web+sites

  You can try to reset (power off / on) of the router.