Message from windows vista - "Firefox has stopped working", what should I do?

Similar Questions

• Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  Hey shousell

  stoppped working covers a lot

  If you can not start, follow these steps

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  or transfer your question in forum windows update link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Error message "Windows Media Center has stopped working" what Xbox Live is connected.

  Original title: TRY XBOX LIVE WITH WINDOWS MEDIA CENTER UI

  I have some setting wrong my XBOX Live interface with my computer. I get the message "windows media center has stopped working", immediately after the seizure of the 8-digit code provided by X - box in Windows Media Center. I dropped my firewall, I also allow all programs and open all ports to come through my firewall. What else can I try to remedy? Thanks, Cliff.

  Hey, Cliff,

  1. what operating system is installed on your computer?

  2. Windows Media Center works great if you do not connect Xbox Live?

  Follow the step in the article below and check if it helps.

  While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Media Center has stopped working".

  http://support.Microsoft.com/kb/932343/en-US (Applicable to Windows Vista)

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• INSPIRON 1440 - Display Driver Intel Graphics Accelerator for Windows Vista (R) has stopped working

  Sometimes the screen of my computer crashes (turns not blue, everything freezes) and nothing works, not even ctrl + alt + delete.

  Then, after a few minutes pass it says "Display Driver Intel Graphics Accelerator for Windows Vista (R) Stopped working but is distributed.

  Subsequently, the computer works fine. This has happened twice now.

  I've seen on other forums that I may need to uninstall and reinstall my display driver but I'm not sure how or which driver to choose. Any information would be greatly appreciated.

  I have a Dell Inspiron 1440 Windows 7 64-bit OS. Thank you!

  Service tag deleted by the privacy policy.

  First uninstall all applications related to the program for example audio, video, webcam application. Press [Windows] and [e] and click on uninstall or change a program:

  

  This will bring up a list of the installed programs:

  

  Double-click the program associated with the unit to start the uninstallation. In your case, it will say something like the graphics card Intel.

  Get the latest driver from the Intel Download Center. The pilot will be in Vista and Windows 7:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22166

• Message: My windows Movie Maker has stopped working in the last week.

  Message: My windows stopped filmmaker working within the last week, began when the error message "the collections of file is not valid or is damaged. A new empty collections file has been created. When I try and import a file of any image type or otherwise, the file is not imported and the error message ends with "unknown error."
  So far WMM worked without fault, as full support has been removed for XP I am now unable to get all the patches. There is also no file conversion to allow to allow the import of files. Times, error message "class not registered"?
  What I'd really like is a copy of WMM version 5.1 (Build 2600 xpsp_sp3_gdr.101209 - 1647: Service Pack 3) Windows Movie Maker Version 2.1. 4028 0, I would continue with WMM, but am completely reluctant to upgrade to Windows 7. Someone at - he found a solution for the problem that I am facing.

  If you can open Movie Maker... try to go to... Tools / Options /.
  Compatibility on the left tab, click on the "all default settings"
  button / OK.

  Also... Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  How to restore a Windows XP system
  a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  How to start safe mode in Windows XP
  http://bertk.MVPs.org/html/SafeMode.html

  Good luck...

• Error message: Message "Microsoft Windows Search index has stopped working and was closed" and TotalRecipeSearch Installer Plugin stub erros in Kaspersky.

  Original title: TotalRecipeSearch Installer stub Plugin

  Hello world

  I have problems with the startup of Microsoft Windows.  I get the Message below "Microsoft Windows Search Indexer stopped working and was closed"  a problem caused the application to stop functioning properly.  Windows will warn me if a solution is available.

  I also have a "TotalRecipeSearch Installer Plugin stub" and "My Web Search Bar for Internet Explorer, client e-mail and messanger clients". in my Kaspersky Anti Virus.  When I press fix it does not.

  Can someone help me?

  Thank you

  Irene

  Hello Irene,.

  Thanks for posting in the Microsoft Community.

  Since you are facing multiple problems, it would be useful if you can answer this question to help you further.

  1 Windows operating system you are using?

  2. have you done any recent software and hardware changes to the system?

  3. what Fixit try you?

  On the issue of Windows search, try the following steps:

  If you use Windows 7, and then try the troubleshooter, another run the Fixit of Windows search.

  Method 1:

  You try to run the search and indexing of convenience store and check if this solves the problem.

  Open the troubleshooter for search and indexing

  Windows search Fixit: difficulty Windows Desktop Search when it crashes or no results

  For more information, see the article:

  Improve Windows searches using the index: frequently asked questions

  Searching in Windows: frequently asked questions

  Method 2: Rebuild the search Index.

  a. open indexing and the Options to search by clicking the Start button, click Control Panel, click on Indexing Options.

  b. click Advanced Options, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  About the issue with Kaspersky, try the following steps:

  You can try to uninstall and reinstall Kaspersky and check if it helps:

  Uninstall or change a program

  Install a program

  Note: Make sure you have the software of security or disk configuration files to install this later.

  If you need further assistance, please answer and we will be happy to help you.

• "Windows Live Essentials has stopped working" Message - After you install Internet Explorer 9

  Get the message stating "windows live essentials has stopped working" why?  Never had a problem with it until I downloaed Internet Explorer 9.  Is there a link?

  Your post is the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE).  We cannot help you in this forum.

  Try the following link for Windows Live Essentials Support: http://support.microsoft.com/gp/windows-live-essentials#tab0

  You can also try the Forum Internet Explorer: http://answers.microsoft.com/en-us/ie/forum/ie9

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update, error: "Windows Modules Installer has stopped working and was closed".

  Whenever I run windows update, and try to install an update for Vista, I get the error message"

  "Windows Modules Installer has stopped working and was closed"

  . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

  Thank you

  Luke

  Hi guys

  I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

  Thank you

  Luke

• "Windows Movie Maker has stopped working

  Original title: Movie Maker of Window

  I'm doing a library of DVDs of my son's football, but every time I try to use Movie Maker of Window I immediately or after I spent hours working get a message saying "Windows Movie Maker has stopped working" then it says windows contact me if they find a solution. No idea how I can prevent this?

  Hi Liska3,

  What operating system is installed on your computer?

  Windows Movie Maker comes pre-installed with Vista, and according to the guidelines of your error message, I would say that you have Vista.

  The following Microsoft Knowledge Base article addresses this issue. Please go through the suggestions.

  Error message when you try to start Windows Movie Maker in Windows Vista: "Movie Maker has stopped working".
  http://support.Microsoft.com/kb/923122

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MICROSOFT WINDOWS SEARCH INDEXING HAS STOPPED WORKING AND WAS CLOSED

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Links Internet and e-mail freezes, slow, screen turns off and stops.  When I get the system operational, I get the message MICROSOFT WINDOWS SEARCH INDEXER has STOPPED working AND WAS CLOSED.  Can not activate system restore to go back.

  Hello

  • What e-mail client is installed on your computer?
  • Is the system restore feature is disabled or there is no available system restore point?

  For Internet Explorer from freezing, you can optimize Internet Explorer and see if the problem still occurs.

  How to optimize Internet Explorer

  Because of Windows search indexer, it seems that there is a fix available, you can contact Microsoft Customer Service & provide article kb 952053, which contains the fix.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center has stopped working

  I get a message saying windows media center has stopped working, I also have one indicating Manager windows media center has stopped working, I think that there is also a manager of STF Windows as well. It's just so a new computer should have no probs. There is also something strange happens with my internet connection. I have all the bars of signal strength, but keep dropping out. Telstra have been of no help!

  I tried the SCF/scannow but I received a message "windows resource protection cannot perform the requested operation" achieved 63% then stopped.
  It was moved by John of microsoft, but the place where? still no answers.

  Hello Emma Howard.

  Thank you for your message.  Please follow the steps below to see if re-register components of the media centre will help to resolve the problem.
  Click on the 'Start' button > in the search box, type "Command" > right click on command prompt and select "run as Administrator".
  Once the prompt command opened in a high State, type the following shots entered after each line.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  Please let us know if it did or did not help to solve the problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Mouse stopped working, to error '(32 Rudll) windows host process has stopped working ".

  My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?

  Hi Stevan I am,

   

  1. for how long have you been faced with this problem?

  2. did you of recent changes on the computer?
  3 do you mean the computer crashes when you get the error?

   

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

   

  Method 2:

  You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

   

  I hope this helps.

• I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a windows message immediately that "Quicken launcher has stopped working" Windows will attempt to resolve then problem__

  I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a message of immediate windows Windows "Quicken launcher has stopped working" will try to resolve the problem then

  Hello Richard Popp,.

  I'm not an expert on Quicken so I do not know what help I will be.
  You could look at this post on the Quicken Forum and see if this information helps you.
  https://qlc.Intuit.com/post/show_post_full_view/cppSsgKbWr3PYHacfArQA8

  1 Quicken uninstall using the Windows Control Panel

  2. run qcleanui.exe and clean all versions.

  3. restart your PC

  4 Quicken resettlement to a new distinct and NOT in the Program Files folder in the folder where your Quicken data resides and install as administrator (if on Vista).

  5 update Quicken at the last updated R6.

  See if that helps. Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• IM using Windows Vista Aero and when I right click Desktop Properties then personalization and appearance I get and error "windows internet explore has stopped working" Please help.

  Ive had this problem for a while now... imnew for vista because it's a new computer.

  I've sorted it but I'm not sure how and now the problem is back.

  When I right click on my desktop and go to personalization , then thecustomization and appearances I get error "windows internet explore has stopped working" and I get the options"restart this program" and "find a solution for this problem" if I don't find a solution nothing happens and if I restart the program it closes it.

  Im not sure what to do as I installed all the updates, a little bit mast service Pack2, but now I can not install more as if I'm going toStart > all programs > windows update if I try to update I get the same error...

  some can help me please.

  Sally.

  Hello

  Sorry we don't communicate via this forum.

  You need a real antivirus because these are the two antispyware. You have the PCtools antivirus
  on the computer or just their toolbar in Internet Explorer?

  -------------------------------------------------

  If there is no antivirus on the computer here is what I use and recommend (except for one
  program like Prevx, you don't want more than one antivirus on the computer program
  much less running because they interfere with each other and lower security). Each combination
  of her below you will warn of malware without toolbar from PCtools running online.

  Here's what I use and recommend: (these are alll free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.