Message Notification has stopped working on the upgrade of Maverick

Similar Questions

• Get error "ggsci.exe has stopped working" after the upgrade of OGG 12.1.2.0.0

  Hi gurus of the Oracle,.

  I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe

  ggsci.exe has stopped working

  If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)

  1. stop all processes Ogg

  2. has taken the old OGG home backup

  3. call the YES program and gave the location of the OGG existing House 11 G

  4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.

  

  If someone has solved this problem. Please help me.

  Best regards

  Jamsher Khan

  I strongly suggest to talk to support.

• HP Officejet Pro 8000 has stopped working on the upgrade to Snow Leopard (10.6)

  Since the upgrade, despite the HP and Apple claiming that the upgrade would take care of things like new drivers, my 8000 Officejet Pro has stopped working. Of course, this could be a coincidence and something else caused the problem.

  Quite simply, the printer button will Flash. The manuals indicate it means need new paper in the tray, or there is a jam. In addition, the print utility said 'in paper '. Of course, I have no jams, and there are 40 pages of paper in the one and only the plateau.

  I deleted the printer in "Print & Fax", turned it off, unplugged the USB and then added back, twice, everything to nothing doesn't. Nothing changes. Still unable to print.

  It doesn't seem to be anything I can try. This page, "Mac OS x: installation and use of the product in Mac OS X 10.6", simply going to say that I should remove the printer and add it, which of course I did. There are no other suggestions for what I could do.

  So either 10.6 broke my ability to print, or the printer is otherwise defective and must be returned under warranty. Any ideas?

  Thank you.

  Update...

  has gone through a series of emails with HP support, during which, with all due respect, I asked me to do what I had already tried. We got to the point where we were providing for the printer to be returned under warranty. Then yesterday morning, bam, the printer works again. No explanation and no idea.

  Best regards.

• Time travel has stopped working after the upgrade to watch OS 3

  Hi all
  Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

  Thank you
  Ray

  Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.

• HDMI has stopped working after the upgrade to windows 8 Pro

  Hi all

  After upgrading my laptop to Windows 7 Ultimate for Windows 8 Pro (upgrade of the place) my HDMI output not working anymore.
  I use a nvidia Geforce 8200 M G graphics card, went to their website and downloaded the drivers of windows 8, but this did not help.
  Is what is happening when I plug the HDMI cable, the laptop screen goes black and there is no output to the TV I am trying to connect to. However, when you remove the HDMI cable, the laptop screen does not return to normal, but still rather dark. I tried pressing + P, but it does not help, and ultimately, I can't get the laptop screen showing something by a full reboot.
  Someone has a bright idea?
  Thank you!

  SOLVED (for me at least)

  I had the same problem after I upgraded my Acer Aspire 5745PG from Windows 7 to Windows 8. My second monitor via HDMI would not be recognized.
  Here's how I solved it: went to the website of the manufacturer (Acer in my case) and downloaded the NVIDIA for Windows 7 driver and installed it. Installation was a little buggy. I had to restore my computer to an earlier point, twice (make sure that you create a restore point before you start just in case where; google if you don't know how).
  In the end, the installation was successful. I plugged in my HDMI cable and second screen has increased as before I upgraded.

  IMPORTANT: Do NOT download the driver from the website of the manufacturer of the graphics card (NVIDIA, AMD, Intel,...). Go to the Web site (HP, Acer, Dell, etc.) of the manufacturer of your PC and find the. I tried the driver from NVIDIA that I have a NVIDIA Geforce Graphics card and it would not install. If you find that several display drivers for your specific PC model on the manufacturer's website you can try then one by one. I found 3 NVIDIA for my Acer 5745P. The second was the right thing.

  Good luck everybody!

• All Creative Cloud software has stopped working after the upgrade to Windows 10

  So... earlier this week, I upgraded my computer from Windows 8.1 for Windows 10, in which I had installed CC of Photoshop, Illustrator CC and first Pro CC from the creative cloud application, all versions of 2015. They were all working well.

  Then, after the upgrade, none of them work. I tried to delete it, follow these instructions: use of the Adobe Creative Cloud cleaning tool to resolve installation issues , but no progress.

  I have error message seems to be exactly the same as in this post: Adobe Illustrator CC 2015 does not launch on Windows Pro 10

  But their solution was a reinstallation of the system, which I just can't do it right now.

  You may wonder that Windows 10 is the problem, but I did exactly the same thing on my phone 3 weeks ago. And it worked fine! (the only difference is that I had CS6 and after upgrading Windows 10 CC)

  Screenshots:

  

  

  

  This error happens (right) too, but I accidentally ticked the box "don't show me": ins.png https://forums.adobe.com/servlet/JiveServlet/showImage/2-7823824-798279/AI-CC19-Error-Plug

  If it does not work. You can try to uninstall and reinstall Microsoft redistributable packages of 2013 and 2012 versions.

• RealDownloader has stopped working with the upgrade to FireFox 22

  RealDownloader V 1.3.2.28 stopped working with my 'security' was last updated to FireFox. FireFox is now V22

  I have tried to reinstalled realplayer, realdownloader, deactivation / activation addons / plugins

  Can't seem to work - when I smile on a YouTube video for example, the 'Download this video' button of RealDownloader does not appear. Works fine in Internet Explorer

  Hello dmcentee, real is aware of the problem and working on a solution - please refer to https://realnetworks.zendesk.com/entries/23689856-Download-This-Video-option-does-not-appear.

• Evy HP dv7 - 7323cl: camera and a Microphone has stopped working after the upgrade to Windows 10

  Hello

  1. I updated my OS from 8.1 for Windows 10. Since then my camera and microphone work stopped.
  
  2. in addition, my model (HP Envy dv7 - 7323 cl) is a support drivers HP for windows 10? Because when I search for drivers on the Hp website and selecting my laptop model gives only two options to download the drivers for Windows 8 and 8.1.

  I don't know if windows 7 is a good idea?

  Thank you

  Mazhar

  Hello
  
  I found the problem. It wasn't on any Windows 10 or any driver.  I recently replaced my laptop screen and everything by replacing the technician missed a small plug to be inserted into the socket near the area of Webcam. And this is responsible for the functionality of microphone and webcam.
  
  Thank you!

• based on the redirection port has stopped working after the upgrade of Capitan 10.11.3

  I have a web service running on a VM (virtualbox VM), which I can access on my mac via 192.168.99.100:8000. The mac itself is tuned to 192.168.1.2. To port 8000, I set up a redirect on the server (Server version 5.0.15 OSX) Web sites pointing to 192.168.99.100:8000. It works, as long as the conscripts of the Mac (even when called from another virtual machine on this mac).

  However, redirection fails when you try to access from other computers within the 192.168.x.y space, or when it is called from the internet.

  ... I add a few comments on what has been checked so far:

  -port 8000 is open to the router

  -OSX El Capitan (10.11.3) firewall application is disabled in system preferences

  -OSX Firewall adaptive server is disabled (using sudo /Applications/Server.app/Contents/ServerRoot/usr/libexec/afctl - X)

  -by checking port 8000 canyouseeme.org it is recognized as open

  ... still, the request never machine made...

• ArcSoft connect notification has stopped working

  I have problems with what follows when the fault Jetcar pc and after a while, I have to start up again.
  ArcSoft connect notification has stopped working
  and
  the folder of system of procedure entry point arccon-live announcement could not be located.
  can anyone help

  http://www.arcsoft.com/Forum/forum_posts.asp?tid=1445

  Read the above info.

  http://www.arcsoft.com/forum/default.asp

  Ask in the Forums of the 3rd party manufacturer at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you don't know anything about it, you can try out of boot entries:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Read the info at the link above.

  See you soon.

  See you soon. Mick Murphy - Microsoft partner

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.

  
  

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working

  original title: setupexe has stopped working

  I am trying to install a PC game. When the DVD and I click on install I get the message, setupexe has stopped working, windows will find a response and advise. Nothing happens. What should I do to install the soul?

  Hello

  ·         The game you are trying to install?

  ·         You are able to install other programs?

  ·         The specification of the computer meets the requirements for the installation of this game?

  Step 1: Check if the game is compatible with Windows Vista.

  Windows Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx

  Step 2: Try to copy the contents of the DVD on the desktop. Then install the game.

• My Lightroom worked the perfect time, but today when I start the program I get a message "Lightroom has stopped working".

  My Lightroom work all the perfect time, but now when I start the program I get a message "Lightroom has stopped working".

  I use Windows 7 pro SP1and Photoshop and Lightroom CC. I think that it is a more recent version.

  Yes, I use the administrator account

• Error message: iTunes has stopped working

  I am running Vista on my Dell Vostro 1700 laptop and use iTunes, without problem, since about 2 years. Suddenly, when I go to launch iTunes, the program happen for a moment, and then I get the error message "iTunes has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "Of course, any notification and I'm basically dead in the water with my iTunes (and, Yes, I have tried everything - re-intall, etc...) So, in short, Help!

  Hello

  Contact apple because it's their software

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149