Message registry or dll error ref: ocbqpyhm.dll

I inherited a PC with XP; have updated & downloaded takes the power. However, whenever I have starting, a "RUNDLL" window appears with the follwing message... "error loading C:\windows\system32\ocbqpyhm.dll' 'the specified module could not be found'... it gives me the ability to click 'OK', what I do and I works without any problems afterwards (surf, email, word, excel, etc.)." HOWEVER, I 'searched' my drive C, Microsfotsupport.com, etc. and 'no files are. I tried to 'run' file of the 'guest' and always without success. I 'google' ocbqpyhm.dll and even in this case there is no file which can be found. Any help to identify what 'this DLL' is 'supposed' to do, and if I really need it will be appreciated. Finally, if I did NOT need, how I eliminate the error message window from popping up whenever I start?

It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.

These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.

Here are the detailed instructions that protect you and solve your problem in the 'right' way.

If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.

You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.

If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.

Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry

. There is no cancellation or exit without saving the option in regedit.

Here is a link to a popular registry backup tool:

http://www.SnapFiles.com/get/ERUNT.html

You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:

http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

Run Autoruns.exe and wait that he at the end of the filling of the list of entries.

When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.

The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.

Scroll through the list and look for a boot entry associated files in the error message.

If you can't find on the connection tab, look in any tab.

You can also click file, search to search for logon, or any tab for all or part of the name of the element.

Right-click on the offending entry and choose Remove. If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.

Given that your system has or has had an infection, follow up with this:

Perform scans for malware, and then fix any problems:

Download, install, update and do a full scan with these free malware detection programs:

Malwarebytes (MMFA): http://malwarebytes.org/

SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

They can be uninstalled later if you wish.

Restart your computer and solve the outstanding issues.

Tags: Windows

Similar Questions

Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

Original title: Windows Rundll error on startup

My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll. The module specific cound not be found. I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

What is a rundll error?

File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

Why do you Rundll errors?

Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

STEP 1: IDENTIFY

The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

STEP 2: STOP THE PROCESS

Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
1. open your Start menu.
2. click on run
3. in the command screen type:services.msc
4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
5.stop the "dll" service immediately.

NOTE: sometimes the dll process can not be stopped by this method.

STEP 3: CHECK FOR AND REMOVE

You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

This action will help you speed up the considerable load time of your applications. Here's how:

1. click on Start
2. click on run
3. type regedit
4. find this registry key:
HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
6. delete the value and reboot.

SPECIAL REMARKS

Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

======================

More information is a lot to explain and resolve the problem.

Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

Because not only it solves problems, there will be new user settings and the program files needed for the user account.

Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

Here is the link.

Run hitman pro 3.5

http://www.SurfRight.nl/en/downloads

help with this error message (load needed DLLs for kernel)

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas:
- You have problems with programs
- Error message load needed DLLs for kernel in Windows XP
- Recent changes to your computer
- What you have already tried to solve the problem
Hello

· When you get this error message?

Refer to the following articles:

Error: load needed DLLs for kernel. : http://support.microsoft.com/kb/326671

http://support.Microsoft.com/kb/812450

Diana

Microsoft Answers Support Engineer

Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Equium A60 won't start - error message: Load needed DLLs for kernel

The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
Re-install? I made this countless times.

Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

Any suggestions on how to deal with this problem will be greatly appreciated.
Blessings on you.

Hello

Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

Impossible to play games, get the error message, the MSVCP60.dll file is missing

I got the game of mahjong quest and game of mahjong quest 2. Now I can not play
I get an error message MSVCP.60.dll file is missing. Error 126
Is there a solution to this problem

Thanks a lot for your answer
I took my computer to the local repair man
It solved the problem for me.
Concerning
Shirley

I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed.

I am running Windows 7. I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed. Also, I lost the ability to transfer MP3s to iTunes and convert them. All of the suggestions. I had a virus attack and had to wipe my hard drive, and then reinstall the programs. ITunes is since that happened. Before I could copy a file from my Olympus digital recorder and make the transfer. Now, I can not drag and click between the windows.

Thank you

Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
1. after the download is complete, select autoruns & right click on it
2. click on "extract here".
3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
4. what which is complete, Open or run "autoruns".
5. in the opened window, click 'all'.
6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
7 right-click & click delete & ok

Option (2)

Click on this link:http://www.pcerrorfixtip.com/VistaAudioLib.dll-157425.html

He helped?

Updated several CC applications last week now none of the applications update opens. I get a message that MSVCR110.dll is missing. Can I get a U44M1P7 error code.

Updated several CC applications last week now none of the applications update opens. I get a message that MSVCR110.dll is missing. Can I get a U44M1P7 error code. Any ideas?

Missing DLL https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html can help

or full Win10 DURATION https://www.microsoft.com/en-au/download/confirmation.aspx?id=30679

U44... Update error http://forums.adobe.com/thread/1289956 can help

The Windows Firewall, Defender and updates among other things aren't working properly, a message that sqlite.dll is missing

I suspect a virus, but I already checked with, Avira, Avast, Malware Bytes, killer TDSS, Norton and Mc Caffe

Original title: my computer firewall windows defender Center action and the site Web of the Microsoft and Apple do not work as well as Windows update and Windows keeps giving me a message missing sqlite.dll?

Hi, a G account,.

You have recently uninstalled software?

Reinstall and see if the problem persists. If this is not the case, look for a tool to uninstall on the manufacturer site to uninstall again if you do not use.

http://www.SQLite.org/download.html

Start in safe mode and run a full scan to ensure the malware has not invaded your system.

Restart and start typing the F8 key

Select Mode safe mode with networking

Download the following and run a full scan

http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

Causes of sqlite.dll errors:
1. a sqlite.dll is removed when a program has been uninstalled.
2. when a program has been installed, a sqlite.dll was crushed and replaced with an older version or a version that is not compatible with other programs.
3. an installation fails a program.
4 equipment failure issues arise.
5. your computer is infected with the virus that deleted an express sqlite.dll

6. invalid or damaged sqlite.dll entries in the Windows registry.

Cannot print the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL was not loaded"

Original title: "Prop Res DLL not loaded".

Try printing the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL not loaded" How can I load it? Typically get this message when I print review copy. My system is Windows XP.32 bits

Hi Robert,.

I would be grateful if you could answer the following questions:

1. did you of recent changes made to your computer?

2. which antivirus app do you use?

Here are a few troubleshooting steps that you can try to solve this problem.

Method 1: Let's uninstall and reinstall the Lexmark X 1185 printer drivers.

To uninstall the printer software, see the following link.

http://support.Microsoft.com/kb/307895

Restart the computer, visit the following link and install the printer drivers.

http://support.Lexmark.com/index?ProductCode=LEXMARK_X1185&page=product&searchID=1368834464501&locale=en&UserLocale=en_US#1

If the method above does not work, follow the steps in the next method.

Method 2: Error Message When you try to print or save a document in OneNote 2007 or in Word 2007: "Prop Res DLL not loading" or "Cannot load Library DLBAPRP.dll"

http://support.Microsoft.com/kb/918730

Note: suggested above steps are applied to your scenario as well.

If you have additional problems, please reply to this post and we will be happy to help you further.

I continue to receive messages that COREFOUNDATION.dll is missing, how can I fix?

I continue to receive messages that COREFOUNDATION.dll is missing, how can I fix?

Hello

· When exactly do you get this error message?

· You have installed iTunes software on the computer?

This problem may occur if the iTunes files or corrupted on your computer.

Uninstall MobileMe from your computer via the control panel. MobileMe is uninstalled, you will receive is more this message.

Or you can uninstall iTunes and then reinstall. Make sure that you install the latest version of iTunes. Currently, this is version 10.5.

You can watch the following article of the Apple with the error message Corefoundation.dll not found:
http://support.Apple.com/kb/TS2211

If this does not help, you will need to contact Apple support.
http://www.apple.com/support/itunes.

Thank you, and in what concerns:

I get a message that magcore.dll is missing, how can I install it for free?

How to free download magcore.dll

I get a message that magcore.dll is missing, how can I install it for free

The best answer to the question missing MagCore.dll comes directly from the flexible arch Support.

Topic: MagCore.dll question

When I try to run the MATS I get a message that the dll is missing

Original title: you try to run Automated Troubleshooting

When I try to run MATS, I get a message that the dll is missing. How can I fix this?

Hi bjacobs,

1. what Microsoft Fixit you try to run?

2. when the problem started?

For more specialized issues of Fixit assistance, please post your request on the Microsoft Fix it Center

Microsoft Fix it Center

http://social.Microsoft.com/forums/en-us/fixitcenter/threads

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

Hello

Method 1:

I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

b. click on continue or provide administrator credentials if prompted.

c. in the type in the following command prompt window and press ENTER:

d. sfc/scannow

e. you should see the following message on the screen:

§ Begin the analysis of the system. This process will take time.

§ Beginning verification phase of system scan.

f. % verification complete.

g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

For more information, see the article mentioned below.

http://support.Microsoft.com/kb/929833

Method 2:

Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

Create a user account

http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

Method 3:

I suggest you do a system restore and check. See the article mentioned below

System Restore: frequently asked questions.

http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

What is system restore?

http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

Thanks and regards.

Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.

just updated to Windows 10, Photoshop cc 2015 will not open.the message says MSVCP110.dll missing

I have just updated to Windows 10, Photoshop cc 2015 will not open.the message says MSVCP110.dll missing

Just fixed this problem for me:

Open the file/Program files (x 86).

Search: vcredist_x64.exe

3 results popped up for me. I ran all three and it fixed the problem for me. Hope this works for you as well.

Unable to print PDF files from update. Get the message "prop res DLL has not loaded.

Unable to print PDF files from update. Get the message "prop res DLL has not loaded.

This problem has been reported to occur with certain Lexmark and Dell printers. These printers are:
- Lexmark Z700-P700
- Lexmark X 1180
- Lexmark X 1170
- Lexmark X 1150
- Lexmark P706
- Lexmark Z25
- Reference Dell A940 (personal all-in-one)
Microsoft has several possible solutions here

http://support.Microsoft.com/kb/918730

Message registry or dll error ref: ocbqpyhm.dll

Similar Questions

Maybe you are looking for