Message: Sell another Application is controlling the wireless adapter

Similar Questions

• Message error "another sellers application is controlling the wireless adapter.

  Hello
  I have a satellite A100 309 and I am trying to configure wireless (intel pro wireless 3945 ABG) card using the intel standard configuration tool (windows one does not support it). I have the following error message «another sellers application is controlling the wireless adapter» I guess that there is a conflict with the windows WLAN utility but I don't know how to solve this problem.
  I tried to uninstall and reinstall the driver but no way...
  Someone at - it an idea?
  Thank you very much.
  JF

  I put t know how it works on your device, but I assume that your camera it is preinstalled tool Intel PROSet WLAN. Using this application you can configure WLAN connectivity. Windows operating system also has WLAN configuration settings.

  The fact is that the two who cannot be activated at the same time. If you use Windows settings, you must disable the Intel PROSet. Remember in front of Windows settings, the box is removed.

• ConfigFree: windows pop up message: sellers application is controlling the wireless network adapter

  Hello

  When I draw a line from nearby wireless networks (with or without WEP security) to the laptop in the middle icon,
  a popup message with the text: the provider application is controlling the wireless card.
  Does anyone know what this message or where I can get the answer to this question?

  After clicking on it you may see far (only the 'ok' button is available), the connecting line with the laptop wireless network disconnects after
  a few seconds.

  Thanks a lot for helping me...

  Hello

  In my opinion this message appears because a 3rd WLan utility configures and controls the WiFi connection!
  There are different possibilities:
  The laptop uses the Intel wireless network adapter and the Intel Proset utility configures the WLan
  Or
  The laptop uses the Atheros WLan card and Atheros Client utility configures the WLan
  Or
  The windows have the option has been enabled and do this job.

  In this case ConfigFree application cannot configure and control the WiFi connection!

• ConfigFree is unable to control the wireless adapter

  Hi I have a problem
  I have two routers in my house
  the connection is interrupted frequently, one router to another
  I tried to disable the device windows wireless, then configfree shows a msg that asked to another provider controlling the wireless card,
  I don't know how to solve the problem
  my laptop model is M70

  hope you help me
  concerning

  Hello

  AFAIK ConfigFree tool is created for the monitoring of LAN and WLAN connections and not command or with the same configuration. To configure your WLAN, you can use the standard Windows WLAN settings or another application, designed by the manufacturer of the WLAN card like Intel Proset Wireless software (probably preinstalled on your device). If you use Intel created a software, you should disable the WLAN Windows option and it is very important.

  Please test a little more exactly and I hope you find the optimal configuration for your WLAN.

• I use LR on my PC, Windows 8.0.  Recently encountered a problem where I can't access one of my LR catalogs.  The LR error message tells me that another application is using the file.  I have to close the "another version" of LR, then restart.

  I use LR 6 on my PC, Windows 8.0.  Recently encountered a problem where I can't access onof my LR catalogs.  The LR error message says that the book is opened in another application.  Close the "another version" of LR, then again to open the catalog.  I find it a different version of LR running on my PC.  ????

  In the same folder that your catalog file is a file whose name ends with .lock

  Delete this .lock file

  DO NOT REMOVE ANYTHING ELSE

• I can't use windwo Defender, my pc show if you use another application to find the unwanted malicious software, use action center to cheack app status

  "I can't use winddow Defender, my pc show' If you use another application to find the unwanted malicious software, use action center to cheack app status."
  Please help me solve. Thank you

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

  I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

  My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

  This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

  Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

  No difference. Always the small icon with Red Cross barred through it.

  I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

  Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

  Thanks for any help I receive.

  > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
  After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

  One last thing:
  > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
  What is the difference between the old and the new installation of Windows?

  In general the WLAN use is fairly simple.
  Wireless network card - must be installed correctly (listed in Device Manager
  WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
  -scan the available WLAN networks area, click on the button of your WLAN and use connect
  -put key WLAN if necessary and after a few seconds WLAN connection will work

  I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

• Unable to connect to the wireless adapter should use LAN

  another computer or a laptop can use the wireless adapter, but one of my knees can't connect to it. I have to use the LAN cable

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye

• HP ENVY x 360-15-u110dx: reset the wireless adapter

  I have a new HP ENVY x 360-15-u110dx and it is not connected to the internet. I have to constantly reset the wireless adapter. What should I do to fix this?

  @pjg31660,

  Hello and thanks for the display on the HP support forums.  Here is a link that should help you solve your problem.

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• C7280 - cannot scan. Error message indicates another program has control over the device

  I open the HP Device Manager to do a scan. I accepted the parameters and the scanning started. But the part passing through the analysis, I stopped the scan that I realized that I wanted to change the resolution. I leave the Manager device and rebooted but when I did, I got to tell an error message:

  'Cannot perform the function you have requested because another program has control over ice dev'.

  I have nothing else open and so I can't work on what program has control over the printer.

  C7280 Prtinter. Mac OS x 10.7.

  The Device Manager has not been updated for Lion and there is still no specific Lion software for your printer.

  So far, you have the choice of scanning with picture Capture or preview.  I'm sorry.

• How to launch an application in another application without using the framework of the call

  Suppose that if I develop an application, and I need to launch another application (provided I have the single app id) within this application, what is best to do.

  I plan to use threads and run another app in a thread. But how do I run the app (is there a call specific methodto)? What other information do I need, except for the app id?

  A quick search on this topic would have shown you that unless you are a trusted partner of BlackBerry you have not needed access to the api at this...

  http://supportforums.BlackBerry.com/T5/native-development/sys-inject-events/m-p/2575865/highlight/tr...
  http://supportforums.BlackBerry.com/T5/native-development/automatic-input-control-sys-inject-events/...

  Even the sticky above would have helped...

  http://supportforums.BlackBerry.com/T5/native-development/FOSS-automated-testing-for-BB10-Cascades/t...

• When booting I get the Visual C++ runtime library error message. This application has requested the execution in an unusual way. Any ideas how to fix?

  When booting I get the Visual C++ runtime library error message

  Hi ToddLynch,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  It is sufficient to indicate the complete error message you receive.

  Put the computer to boot and then check if the problem persists
  

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• How to activate windows Filter Manager norton (error message3039 65553) how to fix the driver to switch the wireless adapter

  Error message from Norton 3039 65553 filter manager not lit

  Disconnected Error Message wireless adapter

  IMO, this kind of response is yet another reason to remove all Symantec software 'security' of your computer.

  As far as I know, Microsoft Windows Filter Manager is software that is designed to be used by third-party developers (it is in this case Symantec) for simply integrating their software in Windows.  It is not controlled by the user.

  That said, it is possible (no guarantee) If you provide information in Event Viewer that relates to the crib of filter, someone here may be able to help.

  • Open the event viewer (start > run > eventvwr > OK)
  • Look in the Application logs and system warnings and errors
  • Double-click a warning or an error of knowledge (properties)
  • If the Filter Manager produces an error, it will probably be in the system log
  • When (if) you find an entry that relates to the Manager of Windows filters, click on the "copy" icon in the properties of the page (just below the up/down arrows) and paste the information into your answer here "

  But you should consider seriously really get Norton Removal Tool and Norton replacement with something else.

  Microsoft Security Essentials is a good free antivirus solution and eSet NOD32 Antivirus is a good business idea.