Message to "Capture device offline" when you attempt to add additional clips from HDV camcorder, in CS5

"Device capture offline" message when you try to add additional clips to an existing project in first Pro CS5.5.2.

Previous capture has been accomplished, but, then, in trying to add additional clips of the same device, it failed.

Every 40 minutes of excerpts of 185 was initially captured by using Sony Vegas Platinum 11 Moviemaker, without error. Additional clips of mt2 were then imported successfully into Premiere Pro after indexation, which conform clips, and they play perfectly well and high quality CS5.5.2 at 1440 x 1080i.

Why the Capture device would be offline, where no physical alteration has been made to the equipment?

Advertisement

Jeff,

I'm now back at the base. Checked the anamorphic HDV on the server of the Studio and he was a con man, tired cable, the M6600 like me after spending six hours at an airport in China.

Replaced cable and everything is fine.

Thank you to all who tried to help.

Bob

Tags: Premiere

Similar Questions

  • I get a message saying try again later when you try to upload a picture from my pc to icloud.

    I get a message saying "try again later" when you try to upload a picture from my pc to icloud. It starts then stops just before the end. try again then the message.  I was also hard to get the pictures to download sometimes. Someone knows what's the problem? Thank you!

    Hi Redsoxgal5,

    Thank you for using communities Support from Apple! I'm sorry to hear you are having these problems with iCloud. If you are having problems with iCloud Photos on your Windows PC, you can find information and troubleshooting procedures described in the following article useful:

    Get help using iCloud Photos on your Windows PC - Apple Support

    Concerning

  • Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

    Hi there - first post here, so please be nice :-).

    We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

    I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

    Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

    Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

    If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

    Concerning

    EFIN.

    Do you get the same error when you try to add the network adapter by using the command line?

    1. esxcfg-vSwitch - L vmnic1 vSwitch0

    If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  • When you attempt to load an album for listening offline with Apple music sometimes only some of the songs on the album are made available. For example, Weezer White Album. Why?

    When you attempt to load an album for listening offline with Apple music sometimes only some of the songs on the album are made available. For example, Weezer White Album. Why?

    What country do you live? Because I just checked this album and all songs should be available in the Apple music - and thus be downloadable. (I live in the US BTW.)

  • Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and has already managed to success

    Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC.  It is the exact error message and seems to be the case for a number of users.  I am running Windows 7 and was already able to install Adobe Acrobat Reader DC and have Adobe Flash Player 10 ActiveX installed successfully.  It's the exact error message, there is NO error code!   It seems as there is no support number to contact Adobe to, and the only way to receive the 'support' is through the forum.   PLEASE ANSWER!

    Untitled.jpg

    Hi tracyes31040766,

    If it you please run this tool cleaner Download Adobe Reader and Acrobat cleaning - Adobe Labs tool to remove the old Acrobat, retsrat your system plates & then try to install it again using this link Download Adobe Acrobat free trial | Acrobat Pro DC.

    Let me know how it goes.

    Kind regards

    Nicos

  • Camera connected but still showing "Capture Device Offline"

    Hello

    2 weeks ago, that I used the capture feature in Adobe first CC for the last time, with no problems. Yesterday I tried to capture a video cassette again, unfortunately not the capture window to say "Capture Device Offline". I can control my camera (rewind, playback, front, etc.), but just cannot click on the record button.

    I use the latest version of Adobe first Pro CC (automatically updated 19 days ago) and I'm trying to capture with my camera Sony FX1000.

    There are 3 days, my PC downloaded automatically updates Windows 10. This update is perhaps responsible for my problems?

    Thanks in advance,

    Justin

    From the Netherlands

    Naamloos.png

    Hi Justin,

    The first thing, in the first of the Capture settings, make sure that it is set to DV or HDV you like to match the band being captured. The transport controls are the same for either, but the video data are very different between HDV and DV. That's why you can have control, but no video, the format is incorrect.

    The next thing to check - will record your DV or HDV camera. Windows detects DV and HDV cameras as two quite different. This same thing happened to me before - can control the camera, but no image. This is because the PC "thinks" he's talking to a DV camera when it is really a HDV tape you play, or vice versa.

    Look in the menu of the camera - you should see options to set the unit of "DV, HDV or Auto. I think it's under the option 'VTR '. Unit must be in VCR mode to see this option, not fashion ENR. Choose the setting to match the tape you want to capture, DV or HDV. Do it with Firewire disconnected from the PC. This will "force" the camera to DV or HDV output via Firewire. Turning the camera off, 1394 connection, turn on the VCR mode. Windows will beep when the camera connects and don't know what will do 10, but Windows 7 always put a small message at the bottom right of the screen. DV camera would say 'Caméra DV' and 'HDV' Save as "Subunit STROKE".

    If this does not resolve the problem, you may have to resort to using the Legacy 1394 driver in Windows. http://www.studio1productions.com/articles/FireWire-1.htm

    Follow these steps should help you back in business

    Thank you

    Jeff Pulera

    Safe Harbor computers

  • Capture device offline help?

    When I go to try to capture video and audio on my Adobe Premiere Pro CS5.5 on my laptop, but when I'm going to do, it says Capture Device offline, and no matter how much I am looking for I know not what it means. I'm not tech savvy so please help?

    All versions of first (Pro and elements) will capture only from a Ribbon ADHESIVE or VCR camera using a scanning (see below) device that is connected to a Firewire port on the computer

    If you don't have such a device, or a Firewire port, you cannot capture from a camera to tape or VCR

    http://www.grassvalley.com/products/advc110 to digitize analog, as video from a VCR

    Amazon http://www.amazon.com/Grass-Valley-Canopus-77010150100-Converter/dp/B00030ATTO

    If you connect a digital camera via USB, you use your computer, the file manager for Windows (or, I think, Finder for Mac) to copy it to your computer's hard drive

    Metadata is in the http://forums.adobe.com/thread/1015001?tstart=0 folder

    -http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

    -http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html

    CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn

  • There was an error when you attempt to connect to the Windows Live Calendar service.

    I get this message when trying to update my calendar:

    There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

    What can I do to fix this?

    Hello Maurizo Martino,

    As your question deals with Windows Live Calendar, there is a forum for Windows Live products.
    Please post in http://windowslivehelp.com/ under the category of Windows Live Mail.

    They will have experts in the Windows Live products that can better help you.

    Sincerely,

  • How to see pictures when you attempt to download a 3rd party app?

    It is a real noob question, but how do I see my pictures when you attempt to download a 3rd party app?

    When I open the file I see an icon and the file name but not actually as a thumbnail image. How do I change this setting?

    Hello
     

    Here's how you can change this:
    a. Once you are in the Explorer window to select the image, right click on the space empty.
    b. highlight the option to consult.
    c. choose the medium-sized icons.
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • "' Windows live mail error ' there was an error when you attempt to connect to the Windows Live Calendar service.

    Original title: when I start my windows live mail. He asks me if I want to go online? Then, I get this error message? just started doing this yesterday?

    There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

    I'm going to ask you to start your own, new topic in this forum now for Windows Live technicians can help you more-online http://answers.microsoft.com/en-us/windowslive/forum/livemail-calendar

    Tip: Include a link to this topic in your very first post so that Windows Live people know so much about your computer like I do.

    Good luck - I think that you're going to need!

  • When you try to download a book from my library, I get the error message: error: check the activation.  What should I now please?

    When you try to download a book from my library, I get an error message: error, check activation.  What should I now please?

    Hi 7Philip1116,

    Using the Adobe Digital Editions software? If so, I suspect that you meet one of the known activation errors. Often, deactivation and reactivation (cmd-shift-D on Mac) or ctrl-shift-D Windows will solve the problem. Instructions step by step, but also other possible solutions are available here: Errors of Activation

    If it is not a question of Digital Editions or if the advice above do not resolve your problem, please respond with a few more details so that we can better solve the problems. What software Adobe are you use and the type of device/operating system? Can you provide a screenshot of the error? The specified item was not found.

    Best,

    Del

  • Capture device offline (Blackmagic DeckLink Studio 4 K)

    Just getting a new computer with 64-bit Windows 10. I use a Sony Vegas Pro 13.0 try and capture works very well. I close Vegas and load up Adobe Premiere Pro CC test, but the capture does not work. I get "Capture Device Offline".

    I use a Sony Handycam HD with HDMI, go to the map of the world BANK. I have the latest software/drivers for the card of the WB. As I said the Sony product works, but Adobe does not work. How Adobe that I buy a product that does not work.

    I tried to change the camera's 720 p, 1080 p and same 480i HDMI output modes. I tried DV and HDV settings in the software also. Hard, trying to find a page of diagnosis in the settings of the acquisition card, you know, like Skype from your webcam. But the only real parameters are "DV" or "HDV".

    Some help would be appreciated.

    You re - install the decklink drivers after installing the first test?

  • When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.

    When you try to open a PDF from Adobe, I get this message "to the 882 ordinal not found in SHELL32.dll dynamic link library.  Any ideas on how to solve this problem.  Have Windows Vista.  Thank you.

    original title: problem opening Adobe pdf.

    Hi Gary,.

    Are you facing this issue only when you open pdf files?

    Method 1:

    You can try uninstalling and reinstalling Adobe software and check if it helps.

    Uninstall a program

    Method 2:

    You also try to run the system restore.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following links:

    System restore

    System Restore: frequently asked questions

    Hope this information is useful.

  • When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

    Elevation required to route add command

    When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

    You can watch using the PowerShell...

    http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

    http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

    .. .and post questions about Windows PowerShell forum...

    http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

  • I remain unplugged for a long period of receipt message that dns does not when you use windows 7

    I remains disconnected for long delivery message that dns does not when you use windows 7, wired LAN

    Concerning

    NAWAB IKRAMULLAH KHAN

    Hello

    ·          When the issue started?

    Method 1:

    Run the Windows 7 network troubleshooting and check if it can automatically find the fault.

    For more information about how to run the network troubleshooter, check this link:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Get the network store event of Event Viewer logs.

    Check out this link on the event logs of the resolution of network problems.

    http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

    Method 2:

    a. Click Start. Type cmd in the box start the search. Right click on cmd and select run as administrator.

    b. at the command prompt, type the following command and press ENTER:

    ipconfig/flushdns (there is a space between ipconfig and /)

    It will show you the message successfully empty the cache of DNS resolution.

    c. at the command prompt, type the following command and press ENTER:

    ipconfig/registerdns (there is a space between ipconfig and /)

    d. at the command prompt, type the following command and press ENTER:

    ipconfig/all (there is a space between ipconfig and /)

    e. the command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

    f. If your connection to the Local network IP address is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

    g. If this is the case, try this:

    ·          enough ipconfig at the command prompt and press ENTER.

    ·          ipconfig / renew in the command prompt and press ENTER.

    h. test it again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

Maybe you are looking for