Message to Raid-1 is worse in Qosmio F30 - 111

Hello

Sorry for my English.

I have a problem with my laptop when turn on show me a massage "Raid-1 is degrading" and can´t use the recovery CD why show me this massage again. I run windows xp mce.

Help me please.

thankss

Hello

I installed OS using DVD recovery successfully. It has been for a long time and if I remember well, you must change the RAID settings in the BIOS on page 3.

I think it should be 1-RAID-0. Check it please this document http://support.toshiba-tro.de/kb0/TSB6901K60006R01.htm

Good luck!

Tags: Toshiba

Similar Questions

  • For Linux - Qosmio F30-111 RAID drivers

    Hello

    I have a Qosmio F30-111 and I need the drivers for the Controller Raid for Linux. Can someone help me.
    I have RAID-0 and the laptop does not start. It displays the XP logo and restarts. So I need to boot from cd or USB key to access or repair the raid partition.

    Thank you
    Antonio Jose

    See also http://newsletter.toshiba-tro.de/main/

  • Upgrade Vista on Qosmio F30-111

    Hello world

    Thought IA´m, purchase a Qosmio F30-111.
    It comes with XP but I want to upgrade to Vista. Everyone set to upgrade to Vista in this specific model without any problem? I already heard that upgrading to Vista in some Qosmio models is a pain...

    Thank you very much help

    Hello

    The installation is easy, but don't forget to install the RAID driver first!
    Without this driver, you will not be able to install the OS on the HARD drive!
    But all the drivers are available on the Toshiba page.

    The new facility is more appropriate to replace the upgrade from XP to Vista because not all XP utilities are compatible with the new Vista operating system!

    Check it out.

  • Qosmio F30-111: no sound after the update of the 3.40 BIOS & Vista installation

    Hello!

    I have a Qosmio F30-111, originally with Windows MCE and all devices works fine, but I made an update of firmware BIOS to 3.40 (before was a version 1.x).

    Later, I installed Windows Vista Ultimate and all devices has been recognized very well (with Toshiba Vista drivers), but the sound was not working!
    The situation was:
    -The sound device has been recognized;
    -The MIC works (but I can't hear it);
    -The speakers do not work!<- the="" real="">

    Now I installed the recovery CD and I'm new to Windows MCE, but noise have the same problem... is recognized, but the speakers do not work.
    I have no idea what to do... I don't know if it is possible to restore the firmware (I think that was the problem).

    Don't forget: the audio device works, the works of Media Player, but I can't hear the sound (Yes, the volume is high and is not dumb)

    Sorry for my bad English,
    Thank you very much!

    Murilo

    Hello Md2

    You can hear the noise if you plug headphones into the audio?

    If there is his helmet and then the audio device works well.

    If not, then disconnect all devices external usb and start a clean installation of vista (not upgrade, but booting from the vista cd)

    don't forget to put the RAID driver on cd or diskette or usb flash key before doing the clean install of vista.

  • Need systemboard Qosmio F30-111

    Hello

    I need a new systemboard for a Qosmio F30-111? (PQF30E-00Z00QDU). The video card is faulty. I live in the Netherlands and it is impossible to find a new systemboard. Can someone help me find one or more companies that can fix it like they do in the United Kingdom. In the United Kingdom, you have a company that can fix without replacing the motherboard (http://www.laptoprepair1.co.uk/laptop-vga-video-repair.html), but they only repair it for the citizens of the United Kingdom only.

    Thanks in advance,
    Charles

    Hmm, motherboards are designed specifically for the single computer series laptop and if you want to buy a motherboard for your Toshiba laptop you will need to contact the ASP in your country.
    Guys should be able to order it directly from Toshiba.

    However, you can view some websites like Ebay for a flea market.

    Good luck

  • Connection S/PDIF on Qosmio F30-111

    Hello, I need some information on the use of the digital audio output on qosmio.

    It seems to have a 3.5 s/pdif out Jack (shared with headphones).

    There are 2 audio cables type digital: toslink optical and coaxial 75 Ohm RCA.

    Is possible to use a coaxial cable with a 3, 5 mm jack to RCA converter?
    Or the only way is to use a cable with 3.5 jack converter toslink optical?

    It's RCA-> Jack 3, 5mm Converter: http://aka.fotovista.com/dev/3/3/46000533/g_46000533.jpg
    It's cable Toslink, Jack 3, 5mm converter and more: http://aka.fotovista.com/dev/7/5/46000157/g_46000157.jpg

    I'm not an audio specification, but I found some interesting info:

    (1) coaxial RCA is the most popular Digital Audio connection. Cables and connectors have an impedance of 75 Ohm and used to connect DVD players, CD and some DAT recorders to multi-channel surround sound (Dolby Digital, DTS, etc) equipment. RCA is often replaced by BNC connections on certain high end equipment.
    (2) Toslink is a coaxial digital audio connection fiber optical version and is used in the same applications as the coaxial. Most of the newer devices has a connection to toslink cables. In applications where the source or receiver has only coaxial connections the signal can be converted to Toslink using a decoder.

    In my opinion if you want to use the SPDIF digital audio output, so you must use cable Audio optical Toslink/SPDIF.

  • Qosmio F30-111 - graphics card problem

    Hello

    My laptop does not show any other resolution than the usual text resolutions (starting).
    The laptop is almost useless with this problem.

    The problem occurred when playing a computer game in the resolution of 1280 x 800 regular graph (for windows).
    The screen went black, but has no power lost. I had to restart from power button / stop.

    Windows XP (from toshiba) gives a blue screen after the splash screen during startup.
    Also, I have Linux and Xorg reports a fatal error when starting driver NVIDIA, so I cannot use the computer in mode terminal linux, no X mode. But I can still use Linux mode of expression and access to all files.

    When I start the screen also has a strange color mode. In text mode, many letters is brighter than others. This happens in installation mode and Terminal in Linux mode.

    Other strange things things I noticed recently, that is the FAN makes noise more now due to the temperature higher CPU (2 to 3 weeks).
    Sometimes reaching 100aº C (which has never happened before). In recent months, the laptop was still in the Office at home.

    I bought the computer round of June 2007, is still under warranty (2 years in the Portugal), and I registered it on the toshiba site.
    Currently, I live in Poland. Can I retrieve my warranty in Poland and try to solve the problem here? (I'm Portuguese).

    Hello

    Looks like the graphics card began to malfunction.
    Therefore, you must contact the ASP as soon as possible.

    I think that you can contact the ASP in Poland to help him, because all laptops are covered at least 1 year international limited warranty carry-in.
    As the name says it of a international warranty and if the warranty is valid the ASP in Poland should be able to help.

    Check this page for any FSA world wide
    http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

    Good bye

  • Need, updated traditional BIOS for Qosmio F30-111

    I would like to get the update of the traditional BIOS as described in updating BIOS FAQ. I have not installed to update windows. (and I don't want to install it)

    If anyone can provide it? version 3.90.

    Thank you

    Hello

    As far as I know, Toshiba driver European page ONLY provides updates of BIOS based VICTORY.
    The trad-BIOS updates are not available on the page of the driver. I think that the traditional BIOS update can be downloaded only by an ASP, so you the user and the password entry.

    Try to contact the ASP in your country and maybe you could get this BIOS by technicians

    Good luck

  • 64-bit RAID problem with drivers on the Qosmio F30 during installation of Windows XP

    I am trying to install Windows XP 64-bit on my Qosmio F30 - 140, so I used Windows Vista 64 - bit RAID drivers. Installing windows has loaded the drivers with USB - FDD success, but as soon as I clicked on the C: partition to install the windows and started Setup I received the following message "Setup cannot copy the file: KR10N64.sys". ""
    Please notify.

    Download the driver again and try to put it on another clean formatted disk

    put all the files on the root of the floppy

    and try to reply to this post ;)

    Post edited by: Reaver

  • Qosmio F30-141 - how to change the RAID to IDA in the BIOS?

    Hello world! I own computer laptop Qosmio F30-141. The problem is that I don't like vassive RAID. Please, could you tell me step by step how to change the RAID to IDA in the BIOS. Thank you in advance.

    Why do you think that this can be changed?
    Maybe you can disable the RAID and be happy without him.

    Have you checked s manuals? It is described how RAID works on Qosmio F30.

  • RAID is available on a Qosmio G50 - 10V?

    HY

    is it possible to install 2 hard drives in a RAID configuration?
    I have read nothing RAID on a Qosmio G50 - 10V.
    It isn't a portable affordable, so I thought that the mainboard chipset will support SATA RAID.

    Thanks for the help,
    Welcome, Carsten

    > I have don t read something about the RAID on a Qosmio G50 - 10V.
    You could neither find anything on the RAID on the G50 because Qosmio G50 matrices does not support the RAID feature!

    All that s!

  • Need driver for 64-bit Windows XP Home - Qosmio F30 edition RAID

    Hello world...

    I'm looking for the Raid tor for winXp x 64 driver little...
    My laptop is Qosmio F30-140

    Please help me find...

    Thanks for the help...

    Salam

    Hello

    I have RAID driver for Windows Vista x 64

    http://cdgenp01.CSD.Toshiba.com/content/support/downloads/raid011016vista_os2007087a.exe

    Try it on XP 64, I think it will work

    ________________________
    Reaver

  • Messages to update Windows Vista 64-bit driver for Qosmio F30 Vista 32 bit

    Hello

    Today, I noticed that, update Windows Vista displays the bad update for one of the drivers of Qosmio F30.

    I have Windows Vista 32-bit, but Windows Update post a 64 bit version of the driver.

    See the screenshot [here: http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]

    Any idea?

    Hmm... it's strange?  :|

    The ACPI from Toshiba x 64 compatible driver certainly means a 64-bit version!

    I put t know why Vista driver update notification indicates a 64-bit to a 32 bit OS driver, but usually the 64-bit driver should not be compatible with the 32 bit OS.

    However, the deal seems clear don t install if the pilot is not designed for your operating system.

    Concerning
    …

  • Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

    Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
    Last updated October 3, 2006

    Important notes before starting:

    1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

    2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

    3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
    In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

    4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

    5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

    6 - notice of disclaimer
    I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

    Steps to follow:

    1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
    "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

    2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
    To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

    3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
    When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
    The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
    Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

    4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
    A Q896256
    DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
    B Q910437
    DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
    C Q889673
    DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
    D - Q896243 (very Important, this will make SD and MMC cards for work)
    DIFFICULTY "ADD Support high-speed SD card"
    Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

    5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
    (Restart your PC after Installation)
    Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

    6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
    Note: To avoid annoying Messages to drivers during Installation to do the following: -.
    Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
    Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

    7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
    Your Internet may need one of the following drivers (depending on your Modem)
    A if you your Internet through LAN then install the 'network' of the driver Cd driver.
    B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
    C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
    D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

    8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

    9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

    10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
    Atheros Client Utility "no need".
    Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

    Enjoy your PC powerful Qosmio Toshiba laptop.

    Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

    Ciao

  • Qosmio F30-127 is unable to read the Vista upgrade disc

    Hi guys,.

    I have a Toshiba Qosmio F30 (127) with the standard front load Mat * a DVD-RAM (model UJ-846) Player.

    I have for months without any apparent problem burn a variety of CD DVD & (R/RW) and recently received my expected Vista Express Upgrade DVD which I assume adopts the format DVD RAM.

    After the upgrade of the BIOS to v3.4, I successfully installed upgrading startup, but only one of the hard drives (RAID) which has been recognized in my windows session (with the recoil, I would simply have used administrative tools > computer management > disk management) ;-(

    I reinstalled XP using the recovery disks provided original in preparation to retry the Vista upgrade a 2nd time to correct the alleged no recorded 2nd hard drive.

    However, on the startup of XP, the Vista Upgrade DVD doesn't have to be recognized at startup (i) or (ii) in the case of a Windows session, without a visible change in the drive icon to indicate the usual recognition.

    If I try to double click on the drive icon, I get the error message:

    "D:\ is not accessible. The request could not be performed because of an i/o device error.

    I have read a number of threads of support which advises: (i) changing some registry keys, which seem to be unnecessary following a procedure of recovering costs of system; (ii) the transfer mode to DMA to PIO on the primary IDE channel in Manager devices, and (iii) the offending disk and IDE/ATAPI controllers Device Manager uninstall followed by a restart of switching. I tried (ii) & (iii) independently several times resulting in Windows Installer automatically the drivers for the hardware newly found followed by a final reboot, but the Enigma DVD persists.

    I tried to install the latest drivers for the DVD RAM driver, including vF103 firmware update in the Toshiba download pages, but the status quo remains.

    Ideas or current symptoms are swinging more and more towards the likely hardware malfunction?

    Thanks for listening...

    For me, it looks like a hardware problem, maybe the lens of the player is not clean or not can not calibrate correctly in the right position

    But try first to remove the drive from Device Manager and restart the laptop.
    The operating system should recognize what it again automatically. If you want to read from this CD, and then try again.

    If she will not change the situation, then I presume that it s a failure of the equipment.

Maybe you are looking for

  • Satellite 2800-S201: what battery should I use

    Hi, I want to buy a battery for Toshiba Satellite 2800-S201. I came to the store and found two bateries supposed to be suitable for my laptop with different voltages (10.8 v, 14, 8V). Which one should I choose? Thank you... Post edited by: NikolaiShi

  • Calibration system as a solution of nonlinear equations

    Nice day The challenge of the day is to provide a calibration for a release of the accelerometer, expressed as a binary value. I have an accelerometer whose operating range can be set (±2g, ±4g ±8g).  The accelerometer itself then generates a binary

  • Printing without margins and paper size selection

    I just bought the HP Photosmart 7510 (C311a) SN: {removed privacy}, I can't get an impression totally without borders.  I always find myself with a slight edge, and at the time that the photo is cropped.   Also, I had a 3210 that has all kinds of pap

  • OfficeJet Pro 8620: Officejet 8620 Unable to scan, copy or fax error

    I get the error failed to scan copies or faxes with my 8620.  I tried resetting and have tried to connect different points of sale with the same results.  I had a year ago, so I'd say it's probably out of warranty.  I could not find someone working o

  • Noise of all new HP 7510 e c311a

    Out of the box, two hours ago.  Everything works perfectly, efax, eprint, connected to 2 computers, 3 devices IApple... and great photos. Only concern I have, is that looks like it is breaking something whenever it starts to print either on letter or