Message when I try to open Windows Movie Maker 2.6 said: the file wmploc.dll has a version number of 11.0.6001.7010 where 11.0.6001.700 was expected. How can I fix this?

Similar Questions

• I received the error message: the file wmploc.dll has a version number of 11.0.6002.18111 where 11.0.6002.18311 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  When we try to play all the songs or a CD on the PC, we get this error message.  Can you please let me know how to fix this problem.

  When we try to play all the songs or a CD on the PC, we get this error message.  Can you please let me know how to fix this problem.

  Try this...

  Restart your computer.

  Start > Search box, type cmd > u glance, upper-left, right click on cmd.exe > press Run As Administrator > at the flashing pronpt, type unregmp2.exe /UpdateWMPVersion > press the Enter key
  Note: to avoid strike fault and bad spacing, it is best to copy and paste the command line above instead of typing.

  After all, said and done, try to replay your CD.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error message "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  Original title: I need the Windows Media Player for WinXP 32 bit.

  Recently when I tried to play an Audio CD using Media Player, I get the following message: "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled. You want to install the player from the Microsoft website? "When I clicked 'Yes', the window get Window Media Player appeared that lists the different versions of the operating system Windows however, in the category Windows XP, only the 64-bit version has been registered and I need the Windows XP 32-bit version. Anyone know where I can get the 32 bit version?

  Hi donsor,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  After the WMP update you an error of wmploc.dll on version number incorrect

  
  Reference: Windows Media Player is not properly installed and needs to be reinstalled

  Hope the helps of information.
  Please post back and we do know.

• The file wmploc.dll has a version number of 11.0.6002.18065 where 11.0.6001.18111 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  Original title: MP3 Association.

  Hello

  Hello

  I have 64 Ultimate, I had a problem with the version number of WMPLOC. DLL, see the attachment. I run Kaspersky AV completely up to date.
  There is a lot of info on the net and none have worked in this newsgroup on how to fix this error however.

  I tried to change the version of the file with resource hacker and I tried all the dos commands to save the version of the file, but it worked only partially.

  I to WMP do not have access to the list of start/programs, don't y at - it programs in one and the list of features "Turn Windows features on or off", my desktop shortcut has been for version 32 bit and who made the error, as did double click an MP3 file.

  I have 32 and 64 bit versions of WMP on my PC, I created a shortcut on the desktop for the 64 bit version and it works however I can't associate MP3s with the 64-bit version, dialogue 'Open with' reverts to the 32-bit version (and I get the error) even if I chose the wmplayer.exe in 64-bit file , I tried to rename the folder WMP 32 bit for windows does not find the exe file in this folder and it uses just Quicktime for the association.

  Y at - it a fix for this problem of association?

  Thank you

  Daniel

  I guess you need go to the 64-bit version of Internet Explorer as well for this. There should be a shortcut to this version in the Menu start - all programs. Tim Baets
  http://www.BM-productions.TK

• My windows media player has a popup that says: 'the file wmploc.dll has a version number of 11.0.6002.18311 where to 11.0.6002.18111. i cant get it uninstalled and reinstalled. Help, please.

  Well, ithink I've pretty much put my problem in the title box.  any help with this would be much appreciated.  I hope I won't have to spend money to get my laptop fixed by the team of geek or someone else of computer repair.

  Well, ithink I've pretty much put my problem in the title box.  any help with this would be much appreciated.  I hope I won't have to spend money to get my laptop fixed by the team of geek or someone else of computer repair.

  ====================================
  The following MSKB article might be worth a visit:

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• window media plyer: the wmp.dll file has a version number of 11.0.5721.5280 where 11.0.5721.5212 was expected. Windows media player is not installed correctly and must be reinstalled.

  advice of pl me to open WMP 11 thanks

  Hi rajendrankarunakaran,
   
  This problem occurs if the version of wmp.dll is at odds with what is defined in the Windows registry.
   
  Try the steps listed in the following article to resolve this problem:
  After the WMP update you an error of wmploc.dll on version number incorrect

• When I try to open Windows media player, is to show that the file wmploc.dll has version no11.0.6002.18111 where11.0.6002.18311 was expected. Help, please

  When I try to open Windows media player it shows that the wmploc.dii file has version no11.0.6002.18111 where 11.0.6002.18311 was expected.  and he prmpting to download from the msn help site.please.

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  This happens usually when the version of wmp.dll is at odds with what is defined in the Windows registry.

  You can follow the steps in the article mentioned below and check if it works.

   

  After the WMP update you an error of wmploc.dll on version number incorrect

  http://support.Microsoft.com/kb/961047

  Hope this information is useful. If you need further assistance, please answer and we will be happy to help you.

• My hotmail account has been corrupted - it is massive by sending an e-mail to my list of contacts, how can I fix this?

  My hotmail account has been corrupted - it is massive by sending an e-mail to my list of contacts, how can I fix this?

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• 'MY Documents' was invaded, how can I fix this mess?

  As I was trying to organize my files and the library, I found copies of all my documents, windows, messages, games live food all in one file.  I have no idea what happened, but has spread to several files, many duplicates and all that appears in "My Documents".  Can anyone help me, I have no idea where to start?

  Hello

  Thanks for choosing Microsoft Community Forums.

  According to the description of the problem, it seems that you are having problems with the duplicate in the My Documents folder files. I'll be happy to help you with this problem.

  (1) is limited only to a specific folder?

  (2) did you have any software / hardware changes before this problem?

  Method 1: I suggest you to follow the steps from the link and check if it helps.

  Eliminate duplicate files (applies to Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/eliminate-duplicate-files

  Method 2:

  Step 1: I would say as you follow the steps to start the computer in Mode safe and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the issue is not persistent, then follow the article to find the cause of the same thing.

  Step 2: If the problem persists, I suggest you to place the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 3 of the link to clean boot the computer to a normal startup mode.

  Method 3: If the problem persists, I suggest using Microsoft Safety scanner and check.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: As you said it started recently, I suggest you follow the steps to complete the restore of the system and check if the problem persists.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about the Windows operating system. We will be happy to help you.

• WMP does not do error saying file wmploc.dll has a version number11.0.6002.18111 when11.0.6002.18065 waiting for how to fix this please someone

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I tried to reinstall windows media player but it does not work

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello giopaco1998,

  Thanks for posting on the Microsoft answers Forum.

  Click on the number to view the article on the version number of Windows Media Player error.

  ID of the KB Article: 961047 - after update WMP you an error of wmploc.dll on version number incorrect

  This will help you solve your problem with the above error.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Greetings, Im getting an urgent message when I try to open my safari browser. He said a number listed in the contact message. Is it a real Apple alert or a scam?

  Hello, I get an urgent message to communicate a number of phone about my safari browser. Is it a scam? What is the official support of Safari Apple #? Thanks for your help?

  It's a scam.

  Force Quit Safari using the command + Option + ESC shortcut keyboard, then restart Safari while hiding the SHIFT key .

  Then, to your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data of the website can leave then restart Safari.

  That should eliminate the alert/scam.

  message edited by;  CS

• Error message when you try to use Windows media Player: the wmploc.d11 file has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected

  My windows media player all of a sudden started giving the message "the file wmploc.d11 has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected.   It started just today and I used it OK so far.    He says then I would go on the site to download the correct version. I click Yes and then try to download windows media player 11 for vista, but it then tells me that this does not apply to my system.  Any help would be appreciated,

  Thanks in advance.

  My windows media player all of a sudden started giving the message "the file wmploc.d11 has a version number of 11.0.6002.18111 where 11.0.6001.708 was expected.   It started just today and I used it OK so far.    He says then I would go on the site to download the correct version. I click Yes and then try to download windows media player 11 for vista, but it then tells me that this does not apply to my system.  Any help would be appreciated,

  Thanks in advance.

  =====================================
  It might be worth a try to do a system restore
  Safe mode for one hour before the beginning of the question:

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  And/or... Maybe the article would be worth the trip.

  (961047) WMP update after you one
  wmploc.dll on version error
  wrong number
  http://support.Microsoft.com/kb/961047

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot open Windows Movie Maker

  Location of Windows Movie Maker

  When I try to open Windows Movie Maker to continue the work I started yesterday, I receive an error message that says: a version is already in use and to close it first.  I can't find where it is.

  When I try to open Windows Movie Maker to continue the work I started yesterday, I receive an error message that says: a version is already in use and to close it first.  I can't find where it is.

  =================================================
  No guarantee, but may be worth a try...

  Open the Task Manager / processes tab... End task on all instances of moviemk.exe

  I was wondering... is this problem occurs after the computer has been restarted?

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My new Windows 7 live Movie Maker is not recognize my old files to windows movie maker (xp). How can I fix this?

  I had some movies from my child on my old windows xp system and computer scientists transferred all my data from this computer to my new which runs windows 7.  The new live version of movie maker won't recognize my files.  How can I fix this?

  I had some movies from my child on my old windows xp system and computer scientists transferred all my data from this computer to my new which runs windows 7.  The new live version of movie maker won't recognize my files.  How can I fix this?

  ==================================================
  This happens when the former projects include transitions and effects which are
  not included with Windows Live Movie Maker.

  Best bet IMHO... create new projects, or install earlier versions of Movie Maker.

  See the following articles:

  5 versions of Windows Movie Maker in Windows 7
  http://www.brighthub.com/multimedia/video/articles/25282.aspx

  Windows 7 - XP Movie Maker 2.1 edition... but in Windows 7
  http://www.brighthub.com/multimedia/video/articles/28935.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• CS6 with Windows 7. The menu item file-> file Info... not working anymore. Opens a window of the white aircraft, but never any information file appears. How can I fix this?

  One of the options from the menu in CS6 recently stopped working. This is the file-> file information...  I see no more image information. How can I fix this?

  Thank you

  Frnak

  See this thread: Info file gives me just a blank dialog box

  The fix goes like this:

  Create a new text file called XMP.cfg (make sure that the extension is cfg and not txt).

  The only text that should be in this file is as below:

  C:\

  Copy the file C:\Windows\SysWOW64\Macromed\Flash\FlashPlayerTrust (create the directory if not already there).

  Restart the Adobe application and review the file information panel.