Messages.app (and safari.app) freeze during use.

Similar Questions

• Satellite 4080 freezes during use. Event ID 5 - port i/o address not

  I have a Satellite 4080 running windows xp sp2 makes it reasonably well. It is used only for basic word processing and Office Automation. Laptop freezes during use and should be set out & back again. In case the Viewer is an event id number 5 the ACPI BIOS attempts to write an unauthorized i/o port address. This is due to the problem with the freezing of the laptop? Microsoft as useful suggest that never contact the editor of the BIOS on possibly updating the BIOS. Any suggestion would be appreciated.

  Hello, Robert

  The update of the BIOS you can find on http://www.toshiba-tro.de/subpage/bios.html but check it please the MORE INFORMATION on the right side.

  I don't know if this will help solve the problem, but you can try. Please be careful with the BIOS update and read the instructions first.

• iOS 10 phone and Message App freeze or Slow

  Hello

  Updated to iOS 10.0.1 on an iPhone 6 s more. T-Mobile carrier.

  After upgrade, phone app may be slow or unresponsive. Message app too slow or not responding.

  Voice mail in the application page phone also buggy. Do not easily play or delete messages.

  I uninstalled bitmoji and removed predictive type as a guess to fix. It did not help.

  All recommendations (with the exception of the hard reset and reinstall)?

  Thank you!

  I have iPhone 5 s and when I type, especially symbol it gel for always up to what I kill and launch this application of msg. He gets to 50% of the time.

• My computer freezes during use

  My computer hangs running, he comes up with what I am running. How can I fix

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "Virtual memory is low" message appears and the screen freezes on Ebay

  Original title - problems with programs not responding not not with pop up saying: insufficient virtual memory

  Try to buy on ebay when it comes to paying for an item of that screen just hangs and wont let me continue. At the bottom of the screen, it says that my virtual memory is low and if I need assistance go to the help section.

  Hello

  (1) do you have made no changes before this problem?

  (2) is limited to only this Web site or any websites?

  (3) using Internet Explorer as your Internet browser or other browsers to access the Web sites?

  (4) windows operating system you are using?

  (5) is the issue limited to Internet Explorer or occurs with other programs?

  The steps of troubleshooting from the link below:

  Method 1: Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows7/change-the-size-of-virtual-memory

  Method 2: Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For reference:

  To improve the performance of the computer, proceed as described in the following article:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  I hope this helps.

• Sierra Messages App is forcing the use of the discrete GPU

  Since the update of my mid 2015 15 "MacBook Pro to Sierra, Messages.app requires the use of the discrete GPU and kill my battery time.

  All the world fell on this and if so, have you found a solution?

  Here, even with a MacBook Pro in early 2011... problem seems to be based on the new 'features messages"that you can use in iOS 10.

  From messages app, the internal GPU is used until I get a message with one of these new features to messages. Then the GPU will switch to the discrete GPU AMD and continues to work with him until I left messages app.

• Firefox has started to freeze on the opening and hangs / freezes frequently during use.

  Firefox has begun to open very slowly [very]!, as well as to crashing and freezing during use. What's happening on all my three machines, two running Win 7 and the other win 8.
  I tried refreshing and disabling, but to no avail hardware acceleration.
  Now it seems to freeze on opening and takes a minute or two to become sensitive, or not at all.
  When I look into during a freezing Task Manager, I see the Firefox process use 35 to 50% of memory [I have 8GB, 12GB, and 16GB] and up to 50% of the CPU resources.
  Everything was fine until the last two weeks.
  In addition, last month, I noticed an almost permanent error on the status bar message - ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

  
  

• How to change the password for Jabber (XMPP) in Messages.app?

  My understanding of the functioning of the Jabber (XMPP) is that the password take place in the email client. I am aware of how to change my password to Jabber via like Adium instant messaging clients, but I prefer to use the built-in client of Messages.app. What I can't understand, however, is how to change my password for the Jabber using Messages.app.

  → Anyone know: Messages.app can be used to change a password account Jabber? ←

  Thanks in advance!

  Hello

  Yes I know.

  Oh, you asked me to tell you?

  Open messages

  Use the App menu > Preferences > accounts.

  Select the Jabber account.

  Uncheck the "enable this account".

  The account is now disconnected.

  You should be able to type in the password box now.

  Just type on the old highlighting and typing.

  EDIT.

  I just read that another way.

  The messages may not make the change to the password at the server end.

  Because you advice I just gave you instructions on how to change the password in the application rather than using the application to change the password on the server.

  Google (who run a Jabber server) can be done online in the account settings (it also changes it for the mail if you use it in Mail as well.)

  Same thing for Facebook Chat (it's also a Jabber server)

  Most of the other servers will have a web page method to do.

  

  20:07 on Monday. 30 November 2015

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• After the upgrade to Firefox 34.0.5, app opens but there is no indication in the browser window, i.e. no URL opens, and there is no message error, but Safari OSX 10.9.5 misfortune

  After the upgrade to Firefox 34.0.5, app opens but there is no indication in the browser window, i.e. no URL opens, and there is no error message.

  Safari (OSX 10.9.5) works.

  I tried the firewall solution, but it does not work.

  Previous version of Firefox work very well. I tried the version installation 34 twice and the computer restart.

  Yoono is a free software that allows you to connect and share with all your social networks and instant messaging in one place services
  www.Yoono.com

  It was very good work. Play well.
  Please mark your last post as solved so other will know.

• Safari and mail app freeze 9.2.1 ios and ios 9.3

  Safari and mail app freeze on my ipad mini 4 (9.2.1 ios and ios 9.3) in these last two days each time if I touch to create a link in the email or on the web page.

  I tried to turn off the power of java script in safari... always gel

• I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I

  I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I use a Mac

  Hello

  Please see connect and disconnect activate Cloud Creative applications

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Concerning

• I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop I get an error message telling me to download and install App Office creative cloud so I didn't and it launches the application craps out and gives the sa

  I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop, I get an error message telling me to download and install App Office creative cloud so I do and it begins to it out craps and gives the same message over and over.

  Hi Paul,.

  Migration wizard does not work in the case of Adobe applications.

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• Messages.app and Facetime.app do not open after OSx updated 10.11.5 Mountain Lion

  Last night, I've updated my Macbook Pro in early 2011 at the El Capitan 10.11.5 Cougar (Yes, the leap). Open all apps to check out them, and Facetime.app and Messages.app are not open.

  FaceTime.app gives the message "an internal FaceTime error has occurred. There was a problem with Facetime. You must exit and reopen Facetime. "A few times. No change.

  Messages.app: Last night after update, I opened it and gives the message "Messages is updated... The database of Messages is in the process of modernization, please wait until it is finished or Messages Quit and restart it later. "Allowed to do that during the night (about 7 hours). App reopened this morning and nothing went up, no new window, no error message, no light 'walk' on the dock; but, if you click on it showed the "Application does not message." After a few re-openings, it's the message even 'Messages is updated"as above.

  I have not tried anything other than a restart.

  Any ideas on what to try? Thank you in advance!

  create a new administrative account, start to this account and see if open programs.

  otherwise, open the Console.app (from projector to type "console" without the quotation marks)

  clear the console log (clear view)

  Launch the application

  Paste the result to the console in this thread for analysis.

• Transfer messages text and imessages iphone 6s for macbook pro app?

  I want to transfer all my messages imessages and the text of my iphone to my macbook pro app messages 6s. My iphone 6 s currently is running on iOS 9.3.1. My macbook pro is OS X Yosemite, Version 10.10.5. I just like having my messages in two places, if anyone has any other suggestions. I would really like to have all my messages on my messages on my cell phone app.

  Well, you want your previous posts there? Or do you want simply that all new? Unfortunately, I have not yet found a way to old messages on a Mac - only big new incoming/outgoing. To contact all those who use iMessage hollow of your Mac, just sign in with your Apple ID. If you also have SMS, text message a phone number, go to your iPhone's app messages, then click Settings > text message transfer and press the button next to your Mac, then put the numbers you see on the screen of your Mac if you have iMessage opened on Mac.

• Problems using Messages app for you sign in to messenger FB

  Hi all!

  I used to use the messages app on my mac to chat on messenger FB. As you may know, we can do this by creating a jabber account in the messages application. However, for these past months, it has just stopped working and I'm basically impossible to connect to my jabber account (e-mail FB). Whenever I try to connect, he asks me to enter my password then it says that my username/password is incorrect.

  Well, they are not bad I can use the same passage to connect to my FB and I checked my username on FB just to be safe.

  I did everything possible to try to resolve this problem. Called apple care, went to the genius bar etc... None of them know what to do. 90% of them did not even know he xas actually gets set up an account jabber and cat by FB messaging directly from the messages app.

  In any case, I hope that someone who is a greater genius than the geniuses at the apple store can help me to sort.

  I have:

  MacBook Air 11 '' - end of 2014

  OS X El Capitan

  Any help to make it work will be greatly appreciated!

  Thank you

  Hello

  https://developers.Facebook.com/docs/chat

  While this Doc says April it was July before most people noticed and it seems that some are stayed connected or were able to reconnect since then as well.

  Basically, Facebook has closed their Jabber server (those with @facebook.chat.com IDs)

  They were launched from a separate application for Macs and have a different game in place in login pages in a browser for the cat.

  

  20:33 on Tuesday. March 1, 2016

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad