messages on local network

I want to be able to send messages on my network, the command net send seems to not work with vista. How can I send messages through my local network. I have 3 computers a vista ultimate a basic and a xp pro.

You know, I've been a Microsoft User/Tech hard matrix for many years now, and I'm a loyal user/customer...however, why they keep removing some features of Windows or Office?

In any case...

After that some searching around, I found that Vista now has a new way to do it-the command MSG (I suspect the msg command has been around before that... but this is the first Windows OS where net send has been deleted). Here's the syntax:

MSG {UserName | SessionName | sessionid | @filename | *}
[/ SERVER: servername] [/ TIME: seconds] [/ V] / [W] [message] username identifies the username specified.
name the name of the session.
Session ID of the session ID.
@filename identifies a file containing a list of usernames,
sessionnames, and the SessionID to send your message.
* Send the message to all sessions on specified server.
/ Server: Server server contact (default is current).
/Time:seconds delay of time to wait for the receiver to acknowledge msg.
/V display information about actions underway.
/W wait for response from user, useful with c
message Message to send.  If none is specified, invited to do
or reads from stdin.

If you want to send a single message on the server named "Server 2003" it would look like this:

C:\msg /server:Server2003 console "server will be rebooted bit - Please save your work as soon as possible!"

Now I can restart my servers without giving someone a bad surprise :)

Hope this helps to answer your question / solves your problem - if it doesn't, please Mark my answer as the answer... Thank you!!!

¢     ¢
?
\------/

Tags: Windows

Similar Questions

  • Toshiba 47L6453DB Smart TV connects to the local network

    I recently bought this TV. I plugged in my local network and Smart TV cannot connect. I get a message asking me to check the network settings. I tested the ethernet cable and the plug with a laptop and they both work very well. I use a broadband of BT router.
    I also selected "wired" when asked the type of connection.
    Any ideas?

    Posted by conorking
    I recently bought this TV. I plugged in my local network and Smart TV cannot connect. I get a message asking me to check the network settings. I tested the ethernet cable and the plug with a laptop and they both work very well. I use a broadband of BT router.
    I also selected "wired" when asked the type of connection.
    Any ideas?

    What is the result of the test network connection? He passes or not? If it fails, the SW-version running on the set?

  • HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

    HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

    Work tried fixing it but all attempts fail.

    Firewall disabled.

    Printer recognizes the router's LAN.

    Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

    Printer does not print.

    How can I fix?

    Hi @AnnisMonadjem,

    Welcome to the Forums of HP Support!

    I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    When you say 'LAN', are you referring to the network or you try to share the printer on the network?

    How is the printer connected? (Ethernet/WiFi)

    If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    HP has several Officejet Pro 8600 series.

    What is the name and the product number of your printer? How can I find my model number or product number?

    • Update the firmware of the printer.
    • Don't hide the SSID (network name).
    • What type of encryption are you helping? HP recommends WPA and WPA2.
    • You have a double router broadband? Make sure that the two groups were not the same network name.

    If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

    To assign the static IP address, use the following steps as a guide.

    • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
    • Type the IP address in the browser to bring up the SAP.
    • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
    • Select Manual IP.
    • Enter your IP address manual (192.168.0.232)
    • Enter 255.255.255.0 for the subnet mask, except if it is different.
    • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
    • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
    • Click on apply.
    • Restart the router, the printer and the computer.
    • Test printing and scanning.

    If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

    • Try printing and scanning.

    In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

    Continue on, if the problem persists.

    Important!   Delete the temporary files and folders by using the disk cleanup utility

    1. Open the disk cleanup utility:

  • Satellite Pro A100 has "limited or no connectivity" & no connection to the local network

    Hello!

    I + really + hope someone might be able to help with this - been going slowly crazy.

    Bought my A100 18 months ago in Australia while I lived there and had no trouble to connect to LANs and others with my wireless. Everything was shipped over to me (here in London) last week and everything seems to have gone pear shaped. The House I live in has Wireless Broadband comes with our Sky Cable subscription, working on (I think - there is no real marking on the device) a router wireless Netgear A/G dual band (108 Mbps 802.11 b/g network). My laptop model is: SatellitePro A100 (part No.: PSAACE-007002EN) and it works on the following network hardware (drivers installed in brackets):

    1394 net adapter (5.1.2535.0)
    Intel(r) PRO/1000 PL Network Connection (9.2.24.0)
    Intel (R) PRO/Wireless 3945ABG Network Connection (10.1.0.13)

    I used the Sky Broadband installation disc to set up the network, but every time I try to connect it tells me that I have "Limited or no connectivity" and will not let me online. I've been on the phone for Technical Support of sky for hours, trying to get this sort, but when I plug in the Ethernet cable to the laptop it will not even get to communicate directly with the router (i.e. put the IP address of the router in explore and view the settings of the router). My 'Connectivity Doctor' shows there is a problem with my wireless connection (which the network has not assigned a network address of the computer), but no problem with my ethernet connection and yet neither will allow me to get online and every time that I try to repair the wireless connection I get an error message saying that Windows could not renew the IP address.

    I have disabled the Bluetooth, reset the router I don't know how many times and made sure that all cards have been activated and crosses without bad red and yellow exclaimation in Device Manager. All network devices seem to be "working properly" (according to the properties of the device).

    After days of weeding through the proverbial haystack of resources online while at work, I think that the problem is either something very simple (i.e. a setting random advanced configuration). I read somewhere as you will need to 'install' the router on the system, and that is not "plug and play" as Sky Broadband seems to have deduced by phone... but I would have thought the installation CD has done this, as when I discovered my connections (when the Ethernet cable is plugged in), it recognizes the connection (it won't only ++ anything). If there is no specific process I need to follow in order to properly install the Netgear router (for which I am currently trying to see if there are appropriate drivers, I need to download), I'd appreciate a lot of the age of enlightenment! It could also be a question that I need to reset the network key in the security settings of the router, as there are already three computers in the House connected to the network... but of course I can not do without first sorting on why my laptop can still communicate with the router via the Ethernet connection.

    Points to note:
    -My laptop runs on Windows XP Professional Version 2002 Service Pack 2
    -The disc to install Sky Broadband installed Internet Explorer 7. the last time I was online, I think that I was still using 6.

    If anyone could be of any use to solve this puzzle, you have earned yourself my eternal gratitude!

    -Danielle

    Hello

    I think that the solution should be simple;
    I presume that you TCP/IP settings are false. I mean that the settings should be set to automatically assign the IP address.

    Please check this box. Simply go to the network connections-> local network connections TCP/IP properties properties

    He put everything on automatic

  • cannot connect to the local network using windows 7

    Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.

    Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:

    Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel connection to the Local network adapter * 9:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. :

    State media: media disconnected

    The connection-specific DNS suffix. :

    TEREDO TUNNELING Pseudo-Interface tunnel adapter:

    State media: media disconnected

    The connection-specific DNS suffix. :

    Tunnel adapter isatap. our field: *

    State media: media disconnected

    The connection-specific DNS suffix. :

    I tried to turn off the firewall and connect without success

    My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date

    Any help would be appreciated

    Thank you

    Well Yes! So it was an older version of the bonjour service... thank you Adobe.

    You can find the latest version here:

    http://support.Apple.com/kb/DL999

  • Cannot turn off the Local network

    Message icon and get XP Pro SP3 right click LAN "it is not possible to disable the connection at this time. The connection may be using one or more protocols that do not support plug-and-play, or it may have been initiated by another user or the system account.

    I am the only user and administrator.

    When I di ipconfig/all, I get this:

    Microsoft Windows XP [Version 5.1.2600]
    Copyright (C) 1985-2001 Microsoft Corp.

    C:\Documents and Settings\Administrateur > ipconfig/all

    Windows IP configuration

    Name of the host...: laptop
    Primary Dns suffix...:
    Node... type: hybrid
    Active... IP routing: No.
    Active... proxy WINS: No.
    ... DNS suffix search list: domain_not_set.invalid
    domain_not_set. Invalid

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. : domain_not_set.invalid
    ... Description: Intel(r) PRO/100 VE Network Connection
    Physical address.... : 00-0F-1F-A1-0C-53
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    ... The IP address: 192.168.1.67
    ... Subnet mask: 255.255.255.0.
    ... Default gateway. : 192.168.1.1.
    DHCP server...: 192.168.1.1.
    DNS servers...: 192.168.1.1.
    184.16.4.22
    Lease obtained...: Tuesday, October 12, 2010 10:18
    End of the lease...: Wednesday, October 13, 2010 10:18

    Ethernet wireless network connection card:

    The connection-specific DNS suffix. : domain_not_set.invalid
    ... Description: Dell Wireless 1350 WLAN Mini-PCI Card
    Physical address.... : 00-90-96-A7-2C-08
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    ... The IP address: 192.168.1.68
    ... Subnet mask: 255.255.255.0.
    ... Default gateway. : 192.168.1.1.
    DHCP server...: 192.168.1.1.
    DNS servers...: 192.168.1.1.
    184.16.4.22
    Lease obtained...: Tuesday, October 12, 2010 10:18:29
    End of the lease...: Wednesday, October 13, 2010 10:18:29

    Hi cciaffone,

    If you can't turn off your connection to the local network by going to the network connections

    Please try to disable it via Device Manager

    go to RUN and type the following command in the RUN: DEVMGMT. MSC

    under network card try turning off your ethernet card.

    hope that helps

  • My local network works, but why I can't ping? LAN works but not internet. A simple quest to the Jedi.

    Hi all!

    I have weird problem and I hope some of you can enlighten us if necessary.

    The background:

    My OS is Windows Vista Home Premium SP 2.   One day, I installed an application proxy - ProxyCap - as a free trial for 30 days.  The application installed a few dll Winsock provider.  After the 30 day trial, I uninstalled the app.  Then the problems started.  Even if the application proxy has been disabled, regular internet links have been completely normal and not affected.  It was only after uninstalling the app that I have problems.

    The problem:

    • The computer is unable to connect one more to any website using the browser.
    • My local network seems to be fully functional, which involves a problem of setting the software.  I say that my LAN is functional if I am going to sign--> Network and Sharing Center--> view status and look under the "Activity" section, I see the link send and receive packets without problem.
    • If I go into control panel of--> Network and Sharing Center--> view status of--> diagnosis, I get the message: "cannot communicate with DNS Server (xxx.xx.xxx.xxx) Network Diagnostics ping to the remote host, but has not received a response."
    • Indeed, if go to start--> cmd and ping my DNS server, I get a general failure for all 4 packets sent.
    • However, I am able to ping my localhost to 127.0.0.1

    My settings:

    • My ipconfig/all output: http://pastebin.com/Ksn2k2ja
    • DHCP is enabled.
    • For the properties of connection LAN--> Internet Protocol Version 4 (TCP/IPv4)--> properties, I 'IP automatically get an address' and "Obtain DNS server address automatically" selected.
    • The same goes for--> Internet Protocol Version 6 (TCP/IPv6)--> properties.
    • The Sysinternal autoruns--> tab providers Winsock application, tells me that I have the "Hello Namespace Provider' active as a WinSock2 registry entry. It is mdnsNSP.dll and published by Apple Inc..  Who was present before installation of the proxy, and this is for iTunes.  Screenshot: http://i1300.photobucket.com/albums/ag86/applemeetworm/winsock_zpsb41ca872.jpg

    What I tried:

    • I tried to reset Winsock for Vista by clicking Start--> cmd and type netsh winsock reset , and restart the computer.
    • I tried to reset the TCP/IP stack by clicking Start--> cmd and type netsh int ip reset c:\resetlog.txt and restart the computer.
    • Restart my router.
    • Deactivation and activation then my connection to the local network.

    Thank you all for helping me with my problem.  I would be happy to provide more information as needed.  Thanks for the research and thanks offering solutions.

    See you soon!

    Hi all!

    I contacted ProxyCap and support staff has been able to solve the problem.

    Apparently, one of my entries in registry Winsock2 (Winsock2, Namespace Catalog5, 5 catalog entries) has been disabled somehow, uninstalling or in my first attempts to address issues after uninstall.

    Thanks to ProxyCap and for other people who have tried to help.

    ~ Congratulations ~.

  • unidentified local network only linksys

    I have a vista ser pk 2, no problem connecting to the wireless network from the purchase in 2005, on a computer dell laptop. A few weeks ago the message appeared after having taken a booster dose, linksys, computer laptop, which provided excellent service to the pole (all bars), but when I went to connect, the error message is "unidentified network local only.»  is there a fix please?  Thank you very much, karen

    Hi KVeRost,

    Check to see if the following is useful.

    Method 1: Reset the modem and check if it helps. You can try to check for the firewall of the router and see if there are parameters that are the cause of the problem.

    Method 2: Log on to the router's Web site and update drivers.

    See also:

    The problems of Internet connection

    In Windows network connection issues

  • Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

    We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

    Hello

    A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

    Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

    If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.

    ----------------------------

    The wireless card drivers much also install utility wireless of the seller.

    Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

    ----------------

    Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    party like Hello and NetMagic 3rd network managers can block local traffic too.

    ---------------------------

    Stack TCP/IP (network IP number) of work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • Cannot view or access my local network of 'my network places '.

    Since the evolution of my router to router ZyWEL I can't diplay or access other computers on my local network. The entire network is invisible from all computers.

    Mallorcan salvation,

    Are a. When you facing this problem?

    B. you get errors?

    C. do you have a cable or a wireless network connection?

    D. the router is not compatible with vista?

    Have e. you checked if a firewall blocks the router?

    First check to see if a firewall is blocking the router then try the procedure below.

    Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.

    Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).

    If you try to connect to another computer, make sure that this computer is turned on and that you have enabled file and printer sharing on your network. For more information, see networking of computers running different Windows versions.

    If your computer has a wireless network adapter, Windows automatically detects wireless networks that are located nearby. To see a list of wireless networks that Windows has detected, click the Start button and then click on connection to. If Windows does not detect a network that you think is in range of your computer, open help and Support and search for "Solving problems finding wireless networks."

    Try not the articles below.

    The problems of finding computers on a home network
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-computers-on-a-home-network

    Solve problems with computers not appearing is not in the network map
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

    Network connection problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    I hope this helps.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • AnyConnect client can not access local network

    Hello

    I have a problem with the Cisco anyconnect. Once clients are connected they cannot access anything whatsoever, including their default gateway.

    Pool of the VPN client is on the same subnet as the LAN (139.16.1.x/24). Local network clients can access DMZ, VPN clients can ping computers on the local network, but they cannot access the DMZ.

    I guess that any rule providing that traffic is absent but I m new with Cisco ASA and I m totally lost. I read as much as I could on this topic, but I do not understand which rule is necessary.

    Thank you very much in advance for your support.

    ASA release 9.4 (1)
    !
    ciscoasa hostname
    activate the encrypted password of WmlxhdtfAnw9XbcA
    TA.qizy4R//ChqQH encrypted passwd
    names of
    mask 139.16.1.50 - 139.16.1.80 255.255.255.0 IP local pool Pool_139
    !
    interface GigabitEthernet1/1
    nameif outside
    security-level 0
    192.168.1.100 IP address 255.255.255.0
    !
    interface GigabitEthernet1/2
    nameif inside
    security-level 100
    IP 139.16.1.1 255.255.255.0
    !
    interface GigabitEthernet1/3
    nameif DMZ
    security-level 50
    IP 172.16.1.1 255.255.255.0
    !
    interface GigabitEthernet1/4
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet1/5
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet1/6
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet1/7
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface GigabitEthernet1/8
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    Management1/1 interface
    management only
    nameif management
    security-level 100
    11.11.11.11 IP address 255.255.255.0
    !
    passive FTP mode
    network obj_any object
    subnet 0.0.0.0 0.0.0.0
    internal subnet object-
    139.16.1.0 subnet 255.255.255.0
    network dmz subnet object
    subnet 172.16.1.0 255.255.255.0
    wialon Server external ip network object
    Home 192.168.1.132
    wialon-Server network objects
    Home 172.16.1.69
    Wialon-service-TCP object service
    destination tcp source between 1 65535 21999 20100 service range
    Wialon-service-UDP object service
    destination service udp source between 0 65535 21999 20100 range
    network of the NETWORK_OBJ_139.16.1.0_25 object
    subnet 139.16.1.0 255.255.255.128
    outside_acl list extended access permit tcp any object wialon-Server eq www
    outside_acl list extended access allowed object Wialon-service-TCP any wialon-server object
    outside_acl list extended access allowed object Wialon-service-UDP any wialon-server object
    pager lines 24
    asdm of logging of information
    Outside 1500 MTU
    Within 1500 MTU
    MTU 1500 DMZ
    management of MTU 1500
    ICMP unreachable rate-limit 1 burst-size 1
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    NAT (inside, outside) static source any any static destination NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 non-proxy-arp-search to itinerary
    !
    network obj_any object
    dynamic NAT (all, outside) interface
    internal subnet object-
    NAT dynamic interface (indoor, outdoor)
    wialon-Server network objects
    NAT (DMZ, external) service wialon Server external ip static tcp www www
    Access-group outside_acl in interface outside
    Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    identity of the user by default-domain LOCAL
    Enable http server
    http 11.11.11.0 255.255.255.0 management
    http 139.16.1.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    service sw-reset button
    Crypto ipsec ikev2 AES256 ipsec-proposal
    Protocol esp encryption aes-256
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES192
    Protocol esp encryption aes-192
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal AES
    Esp aes encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 proposal ipsec 3DES
    Esp 3des encryption protocol
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec ikev2 ipsec-proposal OF
    encryption protocol esp
    Esp integrity sha - 1, md5 Protocol
    Crypto ipsec pmtu aging infinite - the security association
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
    outside_map interface card crypto outside
    Crypto ca trustpoint ASDM_TrustPoint0
    registration auto
    domain name full ciscoasa.srdongato.null
    E-mail [email protected] / * /
    name of the object CN = srdongato
    Serial number
    Proxy-loc-transmitter
    Configure CRL
    Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
    registration auto
    full domain name no
    name of the object CN = 139.16.1.1, CN = ciscoasa
    ASDM_LAUNCHER key pair
    Configure CRL
    trustpool crypto ca policy
    string encryption ca ASDM_TrustPoint0 certificates
    certificate 09836256
    30820381 30820269 a0030201 02020409 83625630 0d06092a 864886f7 0d 010105
    05003050 31123010 06035504 03130973 72646f6e 6761746f 313 has 3012 06035504
    05130b4a a 41443139 32323033 34343024 06092, 86 01090216 17636973 4886f70d
    636f6173 612e7372 646f6e67 61746f2e 6e756c6c 31353132 30353036 301e170d
    5a170d32 33333535 35313230 32303633 3335355a 30503112 30100603 55040313
    09737264 6f6e6761 30120603 55040513 31393232 30333434 0b4a4144 746f313a
    2a 864886 30240609 f70d0109 6973636f 02161763 6173612e 7372646f 6e676174
    6f2e6e75 6c6c3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d
    010a 0282 010100d 2 295e679c 153e8b6a d3f6131d 8ea646e3 aa0a5fa9 20e49259
    ca895563 7e818047 033a4e8f 57f619e9 fa93bfd5 6c44141f b0abf2c0 8b86334e
    bac63f41 99e6d676 c689dcf7 080f2715 038a8e1b 694a00de 7124565e a1948f09
    8dbeffab c7c8a028 741c5b10 d0ede5e9 599f38fe 5b88f678 4decdc4b b 353, 6708
    cfa2fbce f58be06e 18feba56 4b2b04a1 77773ec6 5c58d2ed d7ca4f17 980f0353
    138bfe65 1b1165e6 7b6f94bb ab4d4286 e900178c 147a6dba 2427f38e e225030f
    0a66d1eb 5075c57e 6d77e5bb 247f5bc3 8d3530f0 49dedf2d 21a24b5f daa08d98
    690183cf e82a6b8d 5e489956 c5eecdbc 7fc2365c b629a52b 126b51e2 18590ed5
    c9da8503 a639f102 03010001 a3633061 300f0603 551d 1301 01ff0405 30030101
    ff300e06 03551d0f 0101ff04 86301f06 04030201 23 04183016 80143468 03551d
    dec79103 0a91b530 1ada7e47 7e27b16d 4186301d 0603551d 0e041604 143468de
    c791030a 91b5301a da7e477e 27b16d41 86300d 86f70d01 01050500 06 092 a 8648
    003cdb04 03820101 8ef5ed31 c05c684b ad2b0062 96bfd39a ecb0a3fe 547aebe5
    14b753e7 89f55827 3d4e0aa8 b8674e45 80d4c023 8e99a7b4 0907d 347 060a2fe4
    fa6e0c2f 3b9cd708 a539c09f 7022d2ee fb6e2cf6 82b0e861 a2839a71 1512b3ec
    e28664e9 732270c 9 d1c679d9 1eaf2ad5 31c3ff97 09aae869 88677a3d b 007, 5699
    ecb3032e 2dd0f74f 81f9a8fb 79f30809 723bbdbf dfef4154 5ad6b012 a8f37093
    481fa678 b44b0290 23390036 042828f3 5eefdc43 ebe52d26 78934455 9b4234a9
    4146 166e5adc b431f12f 8d0fbf16 46306228 731c bfeebc43 34 76984 d2e6ebbc
    88ca120a 96838694 d4f32884 963e7385 987ec6b0 dfa28d49 05ba5fa8 641bcfc7
    ff92ac3c 52
    quit smoking
    string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
    Certificate 0 is 836256
    308202cc a0030201 0202040a 0d06092a 83625630 864886f7 0d 010105 308201b 4
    05003028 06035504 03130863 61736131 13301106 03550403 6973636f 3111300f
    130a 3133 392e3136 2e312e31 31353132 30353036 35363236 5a170d32 301e170d
    35313230 32303635 3632365a 30283111 55040313 08636973 636f6173 300f0603
    61311330 11060355 0403130 3133392e 31362e31 2e313082 0122300d 06092 has 86
    4886f70d 01010105 00038201 0f003082 010 has 0282 010100e7 a5c16e86 16c15a10
    e018b868 bac7271a 30f1a3f8 ecb9c6b8 3ed4b1ad c9468f5e 287f2a7a 644f1496
    c43a061e da927d09 a755b53e ed7c6a66 f2f1fb1e f944345c 86e08ce0 891c99b3
    13101ab3 04963fad f91f987f 99f22a89 cd1e8c5a 5e4c026d 2cadd7b7 6620bbd1
    b4a5135b 24ec886f fa061a06 dd536e96 1e483730 756c 4101 23f83a8d 944a7fbe
    93c51d56 32ac0d17 ceb75f63 0ae24f07 f2c54e83 5b84ff00 16b0b899 c925c737
    1765b 066 23 b 54645 bc419684 d09dd130 c1479949 68b0a779 df39b078 6fb0deb9
    758b14c3 f0801faf f0ad60e1 a018ffba d769f867 3fe8e5fc 88ccc5b2 2319f5d4
    617a78c4 74e7a64b 5c68276c 06ea57c1 d0ffce4b 358c4d02 03010001 300 d 0609
    2a 864886 05050003 82010100 dff97c9f 4256fd47 8eb661fd d22ecea4 f70d0101
    589eff09 958e01f1 a435a20e 5ed1cf19 af42e54d d61fc0ab cb2ee7ac 7fcb4513
    1a44cc86 1e020d72 3a3f78d2 4 d 225177 857093d 9 f5fcf3c7 6e656d2b 54a0c522
    f636b8cf 33c5ae34 ea340f32 85dff4c1 50165e7a e94de10b ced15752 0b3a76c1
    2a50777b 20291106 a1a8a214 a 8 003716 680c15d4 ac3f7cc7 378f8f5f 38e3403f
    f958c095 e549c8ed 4baf8cc5 bdcd230e 260754ea 953c3a4c eb01fef5 62b97e01
    9f82ce6b f479dbdd 000c45af 8758b35f b4a958ee 32c4db3f 2ddc7385 dc05b0e3
    78b609ba a9280841 2433ae87 5dd7a7c2 d5691068 1dc0eddc c23f99c5 3df8b1a5
    aadbd82a 423f4ba8 563142bf 742771c 3
    quit smoking
    IKEv2 crypto policy 1
    aes-256 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 10
    aes-192 encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 20
    aes encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 30
    3des encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    IKEv2 crypto policy 40
    the Encryption
    integrity sha
    Group 2 of 5
    FRP sha
    second life 86400
    Crypto ikev2 activate out of service the customer port 443
    Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
    Telnet 139.16.1.0 255.255.255.0 inside
    Telnet 11.11.11.0 255.255.255.0 management
    Telnet timeout 5
    without ssh stricthostkeycheck
    SSH timeout 5
    SSH group dh-Group1-sha1 key exchange
    Console timeout 0
    dhcpd outside auto_config
    !
    dhcpd address 172.16.1.69 - DMZ 172.16.1.69
    dhcpd dns 87.216.1.65 87.216.1.66 DMZ interface
    dhcpd option 3 ip 172.16.1.1 DMZ interface
    dhcpd enable DMZ
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    SSL-trust outside ASDM_TrustPoint0 point
    SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
    Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
    WebVPN
    allow outside
    AnyConnect image disk0:/anyconnect-win-3.1.12020-k9.pkg 1
    AnyConnect profiles Wialon_client_profile disk0: / Wialon_client_profile.xml
    AnyConnect enable
    tunnel-group-list activate
    Disable error recovery
    internal GroupPolicy_Wialon group strategy
    attributes of Group Policy GroupPolicy_Wialon
    WINS server no
    value of 192.168.1.1 DNS server
    client ssl-VPN-tunnel-Protocol ikev2
    by default no
    WebVPN
    AnyConnect value Wialon_client_profile type user profiles
    dynamic-access-policy-registration DfltAccessPolicy
    wialon_1 Wy2aFpAQTXQavfJD username encrypted password
    wialon_2 4STJ9bvyWxOTxIyH encrypted password username
    remote access to Wialon tunnel-group type
    attributes global-tunnel-group Wialon
    address pool Pool_139
    Group Policy - by default-GroupPolicy_Wialon
    tunnel-group Wialon webvpn-attributes
    enable Wialon group-alias
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    !
    global service-policy global_policy
    context of prompt hostname
    no remote anonymous reporting call
    Cryptochecksum:447ec315ae30818a98f705fb1bf3fd75

    Hello

    You don't have NAT exemption the DMZ network to the pool of VPN traffic.

    Please try to add the following statement to run:

    nat (DMZ,outside) 1  source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
    Also please delete the existing instruction manual nat "non-proxy-arp" statement, because it can cause problems like you the ip subnet address pool is identical to that of the Interior of the network.
    no nat (inside,outside) source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 no-proxy-arp route-lookup
    
    nat (inside,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
    
    
    Cordially Véronique
  • My local network is not sending data but receiving. I am not able to connect to internet

    My local network is not sending data but receiving. I am not able to connect to the internet. No problem on my side of the seller.

    conduct a search on the internet, nothing works

    Hi Kaushal,

    1. What is the accurate and complete error message you get?
    2. don't you make changes to the computer before the show?
    3. which antivirus is installed on the computer?

    I suggest you try the steps from the following link:

    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

    Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  • remote VPN and vpn site to site vpn remote users unable to access the local network

    As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

    The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

    ASA Version 8.2 (2)
    !
    host name
    domain kunchevrolet
    activate r8xwsBuKsSP7kABz encrypted password
    r8xwsBuKsSP7kABz encrypted passwd
    names of
    !
    interface Ethernet0/0
    nameif outside
    security-level 0
    PPPoE client vpdn group dataone
    IP address pppoe
    !
    interface Ethernet0/1
    nameif inside
    security-level 50
    IP 192.168.215.2 255.255.255.0
    !
    interface Ethernet0/2
    nameif Internet
    security-level 0
    IP address dhcp setroute
    !
    interface Ethernet0/3
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Management0/0
    Shutdown
    No nameif
    no level of security
    no ip address
    management only
    !
    passive FTP mode
    clock timezone IST 5 30
    DNS server-group DefaultDNS
    domain kunchevrolet
    permit same-security-traffic intra-interface
    object-group network GM-DC-VPN-Gateway
    object-group, net-LAN
    access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
    192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
    tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
    pager lines 24
    Enable logging
    asdm of logging of information
    Outside 1500 MTU
    Within 1500 MTU
    MTU 1500 Internet
    IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
    ICMP unreachable rate-limit 1 burst-size 1
    enable ASDM history
    ARP timeout 14400
    NAT-control
    Global 1 interface (outside)
    NAT (inside) 1 0.0.0.0 0.0.0.0
    Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    the ssh LOCAL console AAA authentication
    AAA authentication LOCAL telnet console
    AAA authentication http LOCAL console
    AAA authentication enable LOCAL console
    LOCAL AAA authentication serial console
    Enable http server
    x.x.x.x 255.255.255.252 out http
    http 192.168.215.0 255.255.255.252 inside
    http 192.168.215.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Crypto-map dynamic dynmap 65500 transform-set RIGHT
    card crypto 10 VPN ipsec-isakmp dynamic dynmap
    card crypto VPN outside interface
    card crypto 10 ASA-01 set peer 221.135.138.130
    card crypto 10 ASA - 01 the transform-set RIGHT value
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP policy 65535
    preshared authentication
    the Encryption
    sha hash
    Group 2
    lifetime 28800
    Telnet 192.168.215.0 255.255.255.0 inside
    Telnet timeout 5
    SSH 0.0.0.0 0.0.0.0 outdoors
    SSH timeout 5
    Console timeout 0
    management-access inside
    VPDN group dataone request dialout pppoe
    VPDN group dataone localname bb4027654187_scdrid
    VPDN group dataone ppp authentication chap
    VPDN username bb4027654187_scdrid password * local store
    interface for identifying DHCP-client Internet customer
    dhcpd dns 218.248.255.141 218.248.245.1
    !
    dhcpd address 192.168.215.11 - 192.168.215.254 inside
    dhcpd allow inside
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    Des-sha1 encryption SSL
    WebVPN
    allow outside
    tunnel-group-list activate
    internal kun group policy
    kun group policy attributes
    VPN - connections 8
    Protocol-tunnel-VPN IPSec
    Split-tunnel-policy tunnelspecified
    Split-tunnel-network-list value split tunnel
    kunchevrolet value by default-field
    test P4ttSyrm33SV8TYp encrypted password username
    username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
    username kunauto attributes
    Strategy Group-VPN-kun
    Protocol-tunnel-VPN IPSec
    tunnel-group vpngroup type remote access
    tunnel-group vpngroup General attributes
    address pool VPN_Users
    Group Policy - by default-kun
    tunnel-group vpngroup webvpn-attributes
    the vpngroup group alias activation
    vpngroup group tunnel ipsec-attributes
    pre-shared key *.
    type tunnel-group test remote access
    tunnel-group x.x.x.x type ipsec-l2l
    tunnel-group ipsec-attributes x.x.x.x
    pre-shared key *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    Review the ip options
    inspect the netbios
    inspect the rsh
    inspect the rtsp
    inspect the skinny
    inspect esmtp
    inspect sqlnet
    inspect sunrpc
    inspect the tftp
    inspect the sip
    inspect xdmcp
    inspect the icmp
    !
    global service-policy global_policy
    context of prompt hostname
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
    : end
    kunauto #.

    Hello

    Looking at the configuration, there is an access list this nat exemption: -.

    192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

    But it is not applied in the States of nat.

    Send the following command to the nat exemption to apply: -.

    NAT (inside) 0 access-list sheep

    Kind regards

    Dinesh Moudgil

    P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

  • Client remote access VPN gets connected without access to the local network

    : Saved

    :

    ASA 1.0000 Version 2

    !

    hostname COL-ASA-01

    domain dr.test.net

    turn on i/RAo1iZPOnp/BK7 encrypted password

    i/RAo1iZPOnp/BK7 encrypted passwd

    names of

    !

    interface GigabitEthernet0/0

    nameif outside

    security-level 0

    IP 172.32.0.11 255.255.255.0

    !

    interface GigabitEthernet0/1

    nameif inside

    security-level 100

    IP 192.9.200.126 255.255.255.0

    !

    interface GigabitEthernet0/2

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/3

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/4

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/5

    nameif failover

    security-level 0

    192.168.168.1 IP address 255.255.255.0 watch 192.168.168.2

    !

    interface Management0/0

    nameif management

    security-level 0

    192.168.2.11 IP address 255.255.255.0

    !

    passive FTP mode

    DNS server-group DefaultDNS

    domain dr.test.net

    network of the RAVPN object

    192.168.0.0 subnet 255.255.255.0

    network of the NETWORK_OBJ_192.168.200.0_24 object

    192.168.200.0 subnet 255.255.255.0

    network of the NETWORK_OBJ_192.9.200.0_24 object

    192.9.200.0 subnet 255.255.255.0

    the inside_network object-group network

    object-network 192.9.200.0 255.255.255.0

    external network object-group

    host of the object-Network 172.32.0.25

    Standard access list RAVPN_splitTunnelAcl allow 192.9.200.0 255.255.255.0

    access-list extended test123 permit ip host 192.168.200.1 192.9.200.190

    access-list extended test123 permit ip host 192.9.200.190 192.168.200.1

    access-list extended test123 allowed ip object NETWORK_OBJ_192.168.200.0_24 192.9.200.0 255.255.255.0

    192.9.200.0 IP Access-list extended test123 255.255.255.0 allow object NETWORK_OBJ_192.9.200.0_24

    pager lines 24

    management of MTU 1500

    Outside 1500 MTU

    Within 1500 MTU

    failover of MTU 1500

    local pool RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 IP mask

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    ASDM image disk0: / asdm - 66114.bin

    don't allow no asdm history

    ARP timeout 14400

    NAT (inside, outside) source Dynamics one interface

    NAT (it is, inside) static static source NETWORK_OBJ_192.9.200.0_24 destination NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.9.200.0_24

    Route outside 0.0.0.0 0.0.0.0 172.32.0.2 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    identity of the user by default-domain LOCAL

    the ssh LOCAL console AAA authentication

    Enable http server

    http 0.0.0.0 0.0.0.0 outdoors

    http 0.0.0.0 0.0.0.0 inside

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    Crypto ca trustpoint ASDM_TrustPoint0

    Terminal registration

    name of the object CN = KWI-COL-ASA - 01.dr.test .net, C = US, O = KWI

    Configure CRL

    Crypto ikev1 allow outside

    IKEv1 crypto policy 10

    authentication crack

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 20

    authentication rsa - sig

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 30

    preshared authentication

    aes-256 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 40

    authentication crack

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 50

    authentication rsa - sig

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 60

    preshared authentication

    aes-192 encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 70

    authentication crack

    aes encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 80

    authentication rsa - sig

    aes encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 90

    preshared authentication

    aes encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 100

    authentication crack

    3des encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 110

    authentication rsa - sig

    3des encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 120

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 130

    authentication crack

    the Encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 140

    authentication rsa - sig

    the Encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 150

    preshared authentication

    the Encryption

    sha hash

    Group 2

    life 86400

    IKEv1 crypto policy 65535

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet 192.9.200.0 255.255.255.0 inside

    Telnet timeout 30

    SSH 0.0.0.0 0.0.0.0 management

    SSH 0.0.0.0 0.0.0.0 outdoors

    SSH 66.35.45.128 255.255.255.192 outside

    SSH 0.0.0.0 0.0.0.0 inside

    SSH timeout 30

    SSH version 2

    Console timeout 0

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    allow outside

    AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

    AnyConnect enable

    tunnel-group-list activate

    attributes of Group Policy DfltGrpPolicy

    internal RAVPN group policy

    RAVPN group policy attributes

    value of server WINS 192.9.200.164

    value of 66.35.46.84 DNS server 66.35.47.12

    VPN-filter value test123

    Ikev1 VPN-tunnel-Protocol

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value test123

    Dr.kligerweiss.NET value by default-field

    username test encrypted password xxxxxxx

    username admin password encrypted aaaaaaaaaaaa privilege 15

    vpntest Delahaye of encrypted password username

    type tunnel-group RAVPN remote access

    attributes global-tunnel-group RAVPN

    address RAVPN pool

    Group Policy - by default-RAVPN

    IPSec-attributes tunnel-group RAVPN

    IKEv1 pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    Review the ip options

    inspect the netbios

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect esmtp

    inspect sqlnet

    inspect sunrpc

    inspect the tftp

    inspect the sip

    inspect xdmcp

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    call-home

    Profile of CiscoTAC-1

    no active account

    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

    email address of destination [email protected] / * /

    destination-mode http transport

    Subscribe to alert-group diagnosis

    Subscribe to alert-group environment

    Subscribe to alert-group monthly periodic inventory 2

    Subscribe to alert-group configuration periodic monthly 2

    daily periodic subscribe to alert-group telemetry

    aes encryption password

    Cryptochecksum:b001e526a239af2c73fa56f3ca7667ea

    : end

    COL-ASA-01 #.

    Here is a shot made inside interface which can help as well, I've tried pointing the front door inside the interface on the target device, but I think it was a switch without ip route available on this subject I think which is always send package back to Cisco within the interface

    Test of Cape COLLAR-ASA-01 # sho | in 192.168.200

    25: 23:45:55.570618 192.168.200.1 > 192.9.200.190: icmp: echo request

    29: 23:45:56.582794 192.168.200.1.137 > 192.9.200.164.137: udp 68

    38: 23:45:58.081050 192.168.200.1.137 > 192.9.200.164.137: udp 68

    56: 23:45:59.583176 192.168.200.1.137 > 192.9.200.164.137: udp 68

    69: 23:46:00.573517 192.168.200.1 > 192.9.200.190: icmp: echo request

    98: 23:46:05.578110 192.168.200.1 > 192.9.200.190: icmp: echo request

    99: 23:46:05.590057 192.168.200.1.137 > 192.9.200.164.137: udp 68

    108: 23:46:07.092310 192.168.200.1.137 > 192.9.200.164.137: udp 68

    115: 23:46:08.592468 192.168.200.1.137 > 192.9.200.164.137: udp 68

    116: 23:46:10.580795 192.168.200.1 > 192.9.200.190: icmp: echo request

    COL-ASA-01 #.

    Any help or pointers greatly appreciated, I have do this config after a long interval on Cisco of the last time I was working it was all PIX so just need to expert eyes to let me know if I'm missing something.

    And yes I don't have a domestic network host to test against, all I have is a switch that cannot route and bridge default ip helps too...

    Hello

    The first thing you should do to avoid problems is to change the pool VPN to something else than the current LAN they are not really directly connected in the same network segment.

    You can try the following changes

    attributes global-tunnel-group RAVPN

    No address RAVPN pool

    no mask RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 ip local pool

    local pool RAVPN 192.168.201.1 - 192.168.201.254 255.255.255.0 IP mask

    attributes global-tunnel-group RAVPN

    address RAVPN pool

    no nat (it is, inside) static source NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 static destination NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24

    In the above you first delete the VPN "tunnel-group" Pool and then delete and re-create the VPN pool with another network and then insert the same "tunnel-group". NEX will remove the current configuration of the NAT.

    the object of the LAN network

    192.168.200.0 subnet 255.255.255.0

    network of the VPN-POOL object

    192.168.201.0 subnet 255.255.255.0

    NAT (inside, outside) 1 static source LAN LAN to static destination VPN-VPN-POOL

    NAT configurations above adds the correct NAT0 configuration for the VPN Pool has changed. It also inserts the NAT rule to the Summit before the dynamic PAT rule you currently have. He is also one of the problems with the configurations that it replaces your current NAT configurations.

    You have your dynamic PAT rule at the top of your NAT rules currently that is not a good idea. If you want to change to something else will not replace other NAT configurations in the future, you can make the following change.

    No source (indoor, outdoor) nat Dynamics one interface

    NAT source auto after (indoor, outdoor) dynamic one interface

    NOTICE! PAT dynamic configuration change above temporarily interrupt all connections for users on the local network as you reconfigure the dynamic State PAT. So if you make this change, make sure you that its ok to still cause little reduced in the current internal users connections

    Hope this helps

    Let me know if it works for you

    -Jouni

  • ASA 5505 VPN remote cannot access with my local network

    Hello guys, I have a problem with my asa 5505 remote VPN access to the local network, the VPn connection works well and connected, but the problem is that I can't reach my inside connection network of 192.168.30.x, here's my setup, please can you help me

    ASA Version 8.2 (1)

    !

    !

    interface Vlan1

    nameif inside

    security-level 100

    192.168.30.1 IP address 255.255.255.0

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP 155.155.155.10 255.255.255.0

    !

    interface Vlan5

    No nameif

    no level of security

    no ip address

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    passive FTP mode

    inside_nat0_outbound list of allowed ip extended access any 192.168.100.0 255.255.255.240

    pager lines 24

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    IP local pool vpn-pool 192.168.100.1 - 192.168.100.10 mask 255.255.255.0

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-registration DfltAccessPolicy

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    dhcpd outside auto_config

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    Mull strategy of Group internal

    attributes of the Group mull strategy

    Protocol-tunnel-VPN IPSec

    username privilege 0 encrypted password eKJj9owsQwAIk6Cw xxx

    VPN-group-policy Mull

    type mull tunnel-group remote access

    tunnel-group mull General attributes

    address vpn-pool pool

    Group Policy - by default-mull

    Mull group tunnel ipsec-attributes

    pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    !

    global service-policy global_policy

    context of prompt hostname

    Yes, you will need to either configure split tunnel so that internet traffic goes out through your local Internet service provider, GOLD / directed by configuration current you are tunneling all traffic (internet traffic Inc.) to the ASA, then you will need to create NAT for internet traffic.

    To set up a tunnel from split:

    split-acl access-list allowed 192.168.30.0 255.255.255.0

    attributes of the Group mull strategy

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value split-acl

    I hope this helps.

Maybe you are looking for

  • New Windows 8 connect to a homegroup based on a Windows 7 computer.

    I have a new computer running Windows 8 and a residential group based on a Windows 7 computer, two flags of HP 64-bit.  My problem is that, after not having not used for several hours, the machine of Windows 8 does not connect to the homegroup.  The

  • Code 10 on my graphics card

    I recently tried to upgrade xp to sp3 directly from a file I downloaded. the punt re pc and then installing failed.when I restarted my pc, I noticed that my games (NFS Carbon and GTA SA) not load.i checked the Manager device and found that my display

  • Iconia B1 does not display pages in landscape in the browser

    Hello, I have a new 7 inch B1 Iconia tablet. I can't look at anything in the landscape from the browser. I have integrated the browser chrome and firefox, it remains in portrait mode. When I use Google star map it switches from portrait to landscpe a

  • Pavilion dv7: Press esc at the startup problem

    I get the Press esc for boot menu message and it crashes it whenever I try to start. I can make it work if I remove the battery and hold down the button to start for 10 seconds or more. I know that it is supposed to discharge the static electricity w

  • Error 5: Access is denied.

    Services: 1. cannot open the Peer Name Resolution Protocol service for playback on the Local computer. 2 cannot open the Peer Networking service for playback on the Local computer. 3. unable to open service Peer Networking Group of authentication for