Messages will not let me connect my Apple ID

Similar Questions

• Satellite L300 will not let me connect

  My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen

  Help!

  Who knows what's the problem here?
  Maybe you should install new OS. You can enter boot options using F8 at startup?

  Repair my computer option is available?

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• Creative cloud says "disconnected" but will not let me connect. Tried all solutions on the login page errors creative cloud 3.

  Creative cloud tells me I am disconnected and will not let me connect. I tried quiting and restarting the program. I tried to configure the automatic detection of the local network settings. I also tried to delete the opm.db. Still does not work.

  Hello

  You can refer to the Thread -: error "You have been disconnected" whenever I try to connect to the creative desktop application cloud

  Also try:- cloud creative connection errors

  Hope this helps!

• Windows Home page will not let me connect you / administrator

  on the windows for users login. Kathy/administrator won't let me connect. I have to use other users. so I can't get my computer to work properly. He will accept my password.

  Hello

  1 is that other users are standard users?

  2 - is the administrator account accepts the password or not. ?

  You can refer to the suggestion contained in the link and check.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765

  You can also see the link provided to know more about lost or forgotten password.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126/en-us

   

  Provide us more information for you to help.

• WRT54G loses connection and will not let me connect again

  WIFI at home was great for 2 years, then every sudden in the last 2 weeks I lose my signal on my laptop and iPhone. Then, I can not find the signal, or if the device detects the signal it wont let me connect. He hears no even except my wep key, I get a message saying that I can't connect to the network. Usually, if I unplug my router and the modem I can connect and wifi takes about 24 hours or so I lost. Any help?

  Since you have already updated the firmware on your router, you reset your router and re-configured all the settings on your router? If this isn't the case, then press in and hold the reset for 30 seconds button... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  When you re - configure all your router settings, you must change some settings under part wireless router...

  Set the channel on your router 11-2, 462 GHz Wireless and that the broadcast of the SSID should be activate...

  Then click the sub-tab under Wireless 'Advance Wireless Settings' and change the tag to 75 interval... Change the Fragmentation threshold to 2304 change the RTS threshold to 2307... Click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...

• Cannot set up Firefox sync on desktop - no recovery key and will not let me connect to get

  I downloaded Firefox for my new android phone and wanted to sync my office with the mobile app. When I went it said I had an account already set in place, but since I don't remember the information about this I just ended up changing the password so I could identify and then deleted the entire account.

  I have advanced and set up a new sync account, but he never gave me a recovery key. I don't think not that anything like that, but then the failure of the initial synchronization and I got an error message indicating the user name or password is incorrect.

  This happened twice and every time I went back and was over by resetting the password or deleting the whole account. But whenever I have go through the steps of creating another account never gave me a recovery key.

  I looked around and I tried following the steps to get a recovery key, but I don't have the ability to manage my account (perhaps because it was never entirely created and never went through an initial synchronization?) and I get an error message indicating the user name and password is incorrect, whenever I try to go through the steps to reset the recovery key. This is despite the fact that I can connect with the same credentials on the page of Firefox sync - for some reason any he just does not accept the normal browser sync tab.

  I am running Windows 7 Home Premium and 13.0.1 Firefox version. No matter what help you can give me would be most appreciated as this has been driving me crazy for the last hours I'm trying to work through this.

  Hello

  Please see this for more details about the recovery key. You can also try to start over again using these steps (three parts): https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync

  If you are able to connect to the synchronization site which means the account still exists. In this case, you can try to delete the account, wait a few minutes and then try to configure the synchronization as described in the previous link.

  To check potential temporary disruptions of synchronization: https://services.mozilla.com/status/

• Windows will not let me connect on Skype

  Hey guys,.

  I bought a new computer from Windows 8 nice a few months ago and also installed Skype.

  I had a Skype account for a long time and I have used many.

  Until a few weeks ago, I couldn't get into Skype anymore.

  If I click on Skype icon on my screen, it will open, but then immediately he asks for my password and asks me to connect with my microsoft account.

  But I just want to connect with my Skype account, because I am not fond of linking all your accounts to another, but also why there are different programs.

  So there is a button that says: log each application separately.

  But that does no good because I can not yet connect here with my Skype account.

  Can someone tell me how I can connect with my SKYPE account.

  I'm a little frustrated here and could use help

  Thank you

  Nike

  In order to be able to connect with your Skype account, you must first install the desktop version of Skype. This is the same version that will launch on all previous Windows systems (XP, Vista, 7).

  The currently most recent Skype 6.14.0.104 desktop version can be installed using the msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• will not let me connect

  Hello

  Have frustrating problem that the NASrn104 won't let me sign in using my user name and password.

  I keep having to do OS restart and sign in using the "admin/password" it allows me to connect

  I then goto setting new password, what do I do

  I closed then everything down, including the SIN

  Restart all and get the same problem of not having SIN accept the new password.

  RAIDar version 6

  and just downloaded the latest firmware NAS

  any help apreciated

  The best was to come

  to use admin as username and my password

• have a laptop that will not let me connect to internet, that its windows saying unable to connect to the notifaction of system event

  can you please help

  can you please help

  No connected system event Notification service

  See if this will help you to start the recent Notification System...

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll down to find the event notification system... > until it clicks >
  topic status, it should be... Has begun
  under Startup Type, it should be... Automatic
  If it is not defined, right-click the event notification system > properties >
  in the start of type position, click on the pointer, and then select Auto
  as a Service status, click Start
  Click OK when finished

  Make the same adjustment of...
  Remote procedure... that represents the remote procedure call (RPC)
  DCOM Server Pro... which represents a DCOM Server process Launcher

• BlackBerry smartphones will not let me connect my phone then freezes!

  I downloaded the calculator pro points weight watchers on my curve 8520 yesterday that my friend recommended and it freezes as soon as u click on connect! When I finally my phone back, he said that it was not meet and terminated can help more to get this to work

  Hello

  Start by doing a battery pull. Then the device is turned on, remove the battery for 15-30 seconds, and then wait for it to restart. Who help me?

  If not, then try to remove the app and reinstall it. If this does not help, I would say to contact the developer of helper. There should be support of addresses registered under the list in the App World of products. They may be able to easily resolve things, or they may be able to use your information to understand what is causing the problem and then issues an upgrade (if necessary).

  Good luck!

• Computer laptop Windows 8 will not let me connect, and the code to reset are not sent

  I just got a new laptop lenovo yesterday, I've set up and it was perfectly fine, I've been in and out of her signature today without any problem, until that earlier. I stopped him an hour ago and now I can not connect, it is said that the pasaword is incorrect when I know it's because I can connect anywhere else for what is right. I tried to reset my password several times but I do not get a code.

  The cat has worked.  Turned on emails telling me that a reset code would be sent received in my Inbox, but the emails with the codes have been sent to my spam folder.

  Thanks for your help!

• Tumblr will not let me connect to my blog

  I have always used the internet Explorer, but he was blocking some options for some sites like tumblr. So I downloaded firefox, mainly to use tumblr. At first it was great, I didn't have a connection problem with my tumblr account the first time I went to the site, and I never disconnected after that. Everything was excellent and it worked well, until this morning when I had to unplug because I wanted to communicate with another account. When I tried to connect my account, he started the connection, but she returned to the login page. I tried several times more with my real account and I still had the same problem, it brings me back to the login page before the end of the connection with my blog. I tried with internet explore (just to be safe, I got the right password and the good e-mail and all), and I am able to connect and disconnect as I want, as before, but I do like tumblr of the Explorer, I would really like to be able to again use the tumblr with firefox.

  Can someone help me please?

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".