Metadata Windows 7 I tend to take a lot of pictures and I want to be able to add metadata to photos that I know what talking about photography,
original title: metadata Windows 7
I tend to take a lot of pictures and I want to be able to add metadata to photos that I know what talking about the picture, where it was taken, the people of marking on the photo, etc. I used the Windows 7 Explorer to add metadata to photos (the pane at the bottom of the Explorer or by doing a right click and using the properties--> details recording here). Everything's all right. But the addition of data to hundreds of photos is a very demanding task. Therefore, I wanted some advice on the following questions before that I seriously undertake this work on thousands of photos:
- If I add metadata to photos using the Windows 7 Explorer, and then copy the photos to another computer with Windows XP, I keep all the metadata information that I added in Windows 7 and be able to read in the Explorer of Windows XP? Or will I lose all the metadata as we can add in a specific Windows 7 format, unreadable by Windows XP? Or even that I lost a part of metadata (fields newly added in Windows 7, in case some [which?])?
- These metadata will be compatible in the future versions of Windows? If I upgrade to a later version of Windows (whenever it comes out), my metadata laboriously added will be present and readable as well as all the pictures?
- Is metadata embedded in the file or is it stored in another table inside the Windows OS? I know this because, to wire different versions of Windows, I have totally lose the metadata when I copy the photos or that it will be present in the Interior photos but will only be unreadable?
If I lose any of my metadata on different versions of Windows, then this method of recording information of the photo seems unnecessary. If this is the case, can someone advise me the best method to save the details of the photos inside photos so that they are available (and readable), everywhere where the photo is taken or copied.
Hi mnae,.
If you add metadata to photos and then to copy the photos to another computer it keeps all the metadata information that you added.
If you upgrade to a version more recent Windows information will be preserved. Metadata are embedded in the file only.
I suggest that you first test with some files and check.
Tags: Windows
Similar Questions
-
The \windows\installer folder takes a lot of space and I want to move it to another drive if possible. Ashwin
No, I don't think. Just about anything in the Windows directory cannot be moved. You will need to find another way to clear disk space. Try to compress your drive hard (if you don't know how, ask).
-
Installation... Using Windows 7 64 bit - Install takes a LOT of time... is this normal? It's been over an hour...
then you have probably lost connectivity. If you are using a wireless connection, try a wired.
If necessary, you can use a download with direct download manager,
Downloads available:
- Suites and programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- Premiere Elements: 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 12 | 11, 10 | 9,8,7
- Lightroom: 5 | 4 | 3
- Captivate: 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
I think I have a virus or spyware. It seems that it is running dllhst3g exe and take a lot of CPU and memory. Anyone know if this is a virus?
Malware or a virus infection
http://www.bleepingcomputer.com/tutorials/how-to-remove-a-Trojan-virus-worm-or-malware/
-
Application Builder takes a lot of time and the Popup messages during construction
Hi all
My request is slightly larger with over 300 of VI. Between the build process that I receive pop-up messages requesting files from the library GMath etc... are changes u want to save the files... ? When you click on OK button it starts to save these files of the library and when he saves nearly half the number of files in the grave application builder fails and causes LabVIEW close. As the build process takes more than 2 hours and the final result is always a unsuccessful construction due to the accident of application builder I am wasting my time.
Kind regards
Pavan
Here's what I'd do:
- Open the main VI
- Press Ctrl + Shift + Run to recompile all the screws in memory
- Wait until the end
- Save all the
If there is, repeat for each dynamic called screw
-
Netsvc takes a lot of memory and cpu
The netsvc take 50% CPU and 989084K memory. Anyone has any ideas. Screenshot is attached.
Hello
Once you are sure you are clean and that you have completed the above cleaning use the clean boot
method if necessary:How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlAutoruns - free - see what programs are configured so that it starts automatically when your
system boots and you log in. Autoruns is also the full list of registry and files
locations where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
I hope this helps.Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Windows Defender is annoying me and I want to remove it. How do I do that?
original title: defense systemSystem Windows defender is trying to make me buy and continuous interupting everything what I do, it is not enabled, so I can't remove it, it says I have threats, but I know that I don't have that I am covered by microsoft security databases, can someone help me remove this problem
Hello
Follow the steps to remove below:
http://www.bleepingcomputer.com/virus-removal/remove-Windows-system-Defender
-
I'm very frustrated by the lack of ability to rearrange the photos manually in the arrangement sorted I want in Windows 7. In Windows XP, it was easy. If it's not broken, why Bumble and limit its option to disable the automatic editing feature?
Tim
I'm very frustrated by the lack of ability to rearrange the photos manually in the arrangement sorted I want in Windows 7. In Windows XP, it was easy. If it's not broken, why Bumble and limit its option to disable the automatic editing feature?
Tim
Hello
See the tutorial below for the solution.
How to disable Auto organize into folders in Windows 7? -The Winhelponline Blog:
http://www.Winhelponline.com/blog/disable-auto-arrange-folders-Windows-7/Concerning
-
When you try to download any application in the Windows store I get the error message "your purchase could not be completed: something happened and your purchase could not be completed. I am connected to the internet and signed on my Microsoft account. It's a common mistake others are experiancing?
Hi, Simeon,.
Are you by chance using the built-in administrator account?
Have you tried to clear the cache to store (if you are facing the same question that Gaara was)?
From the Office:
Press the Windows key + R
Type WSReset.exe and press enter
ResetYou can also try the following:
The process below will put you in a "clean boot" that allows only Microsoft services to run at startup. This will prevent only 3rd-party programs and services from loading at startup.
From the desktop:
Press Windows key + R
In the run box, type msconfig and press enter
On the Services tab, select hide all Microsoft services and click on disable all the
On the Startup tab, click to open the Task Manager
On the Startup tab, right-click and disable each startup item and then close the Task Manager
Click apply/OK on the System Configuration screen, then restartOnce you have completed the test, remember to set your computer to a normal startup.
@Gaara, do you remember what test you ran exactly?
Thank you!
-
Toolbar is oversized, takes a lot of space and the icons are not displayed right - Firefox 29
Just upgraded and now the URL bar/tools bar becomes huge and distorted on some Internet sites, others it's fine.
Any ideas on how to fix?
I can post a picture, but I don't see a place to do it here.
She strives to find now, so I think it's a plugin that has since been updated.
Thank you guys
-
When you try to debug, it takes a lot of time and JDE hang.
Dear Sir/Madam,
I use the Blackberry JDE 4.1, 4.2, 4.3, 4.5 and 4.6. As a first step, I can debug with device and Simulator. Now, even I try to debug the application samples integrated, the shot of the Simulator and indicate you debugging attachment... and it's never light up.
So I close the Simulator and try to fill the JDE. The JDE never answer after trying to debug. I don't click something and can not close the JDE. I can only close the JDE for the Task Manager. It occurs in all of the JDE.
I tried to uninstall the JDE and installed again. But after the relocation, the problem is still intervene.
Please kindly tell me any possible solution! or, please tell me why it's happening like this!
Thank you,
With respect,
Sweet Sweet
Hi thanks for your response!
I did not go to the autorun to any project.
But now, I used the JDE erase method. I erased the file system, memory non-volatile and memory removalble.
So, it works fine now.
Thank you,
With respect,
-
Not able to install the installer. It is stuck forever.
Just follow the instructions on the link of Sarah, and the downloaded installer completely in less than 10 seconds.
You have a good Internet connection? What browser do you use? Try a different browser, maybe?
-
Is it possible for me to use the email Adobe sent me 4 years ago as evidence and retrieve my serial number for installation? Help!
Quickly find your serial number
Mylenium
-
I have a beautiful hi-res jpg photo of my children, I would like to make the wallpaper on my pre, unfortunately he fills all the screen. Does anyone know what size/screen resolution must be converted in order to complete fill the bottom of pre...
Screen resolution is 320 x 480. Instructions for saving the photos as wallpaper can be found on page 110, User Guide.
WyreNut
Maybe you are looking for
-
TCP/UDP endpoint Viewer has encountered a problem and needs to close. We are sorry for the inconvenience. It appears each time I try to open the tcp view to monitor connections to my computer. Why is it that happens when I open other downloads very
-
How can I fix a problem with WHD20-W16?
Running a diagnostic scan the targeted reading Test has failed. What is and how to fix it, please and thank you!
-
HP Pavilion 6 series: o/s 10 printer software failure
Upgraded from Win 7 to win 10 two months ago. HP Photosmart C4180 printer worked fine. After that various clean ups and equipment installs and uninstalls, my printer stoopped working. Windows Update kept reminding me to downlaod more complete soft
-
Behind closed doors when the fan comes on (HP Pavilion G6)
I have just bought a HP Pavilion G6 2295sa yesterday and spent the day installing my usual software on it (Office, Visual Studio, etc.). Tonight the fan started to come strong enough (his rattling not or anything like that, just go fast I think). The
-
Question VMFS / corruption?
HelloI'm having a problem with a file in my VMFS data store:/ vmfs/volumes/51d6fc9e - 9 to 548661-4054-00301bbd0b99/OpenERP7 # ls-l-rwxrwxrwx 1 root root 2751508480 6 Jul 12:28 OpenERP7-000002 - delta.vmdk/ vmfs/volumes/51d6fc9e - 9 to 548661-4054-00