MFC71. DLL file not found

Similar Questions

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I have error msikhd32.dll file not found on startup, how to solve this problem?

  msikhd32.dll

  There was a problem starting msikdh32.dll

  The specified could not be found.

  Hi Vipul,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand that you receive error msikhd32.dll file not found when starting.

  To better understand the issue, answer the following questions.

  You did changes to the computer before the show?

  You can perform the methods suggested below and check if they will help you solve the problem.

  Method 1: Perform the clean boot, check if you receive the message.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: perform the complete analysis of a computer by using the Microsoft Safety Scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the problem persists, or if you want more help respond us. We are happy to help you.

• WOW64.dll, Wow64cpu.dll, Wow64win.dll files not found

  Hi all

  I'm on Windows 8 pro on a self-build.

  I was looking through the tabs of Autoruns and KnownDLLS tab is showing that loading of the 3 DLL through the registry are not in the files required - details are:
  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\KnownDlls
  _Wow64 file not found: C:\Windows\syswow64\Wow64.dll
  _Wow64cpu file not found: C:\Windows\syswow64\Wow64cpu.dll
  _Wow64win file not found: C:\Windows\syswow64\Wow64win.dll

  These DLLS can be found in C:\windows\system32.

  Anyone know why the registry entries pointing to the right folder?
  Can I copy the DLL Wow62 in C:\Windows\syswow64\, or edit registry entries?

  THX.

  Don't be concerned if autoruns reports these files as not found.   Just ignore it.  These three files are critical to (and invisible to) 32-bit processes running on a 64-bit processor.

  For a little fun, you can see this by launching the Aboriginal and x 86 versions of Windows PowerShell, type the following command in both.   Surprisingly, you will get different results:

  CD $env: windir\system32

  dir. wow

• groovetutill.dll file not found. Although installed form a site in the file system

  whenever a click on the desktop, Explorer etc. for first time internet always a message drop-down "Grooveutill.dll not found".

  Hi X MEN,

  You did it of any material changes or software on the computer before this problem?

  groovetutill.dll is a Microsoft Office application file.

  I suggest you Microsoft Office application to fix and check if the problem persists.

  Diagnose and repair Office programs by using Office Diagnostics crash

  Hope the helps of information.

  Please post back and we do know.

• Apple synchronization notifier works do not base foundation dll file not found.

  just recently downloaded itune 9 and since then when turning on computer (using vista professional) comes up with apple sync Notifier and core foundation dll not found. where can I get this file free and what I do next to fix the problem?

  Hello sheard229,

  Uninstall MobileMe from your computer via the control panel. MobileMe is uninstalled, you will receive is more this message.
  Or you can uninstall iTunes and then reinstall. Make sure that you install the latest version of iTunes. Currently, this is version 9.1.

  You can watch the following article of the Apple with the error message Corefoundation.dll not found:
  http://support.Apple.com/kb/TS2211

  If this does not help, then as Mick Murphey said, contact Apple support.
  http://www.apple.com/support/itunes.

  If please reply back and let us know if this helps solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• In Vista is "mantWGE2.dll file not found" message

  How can I fix this module.  My computer says that it can not be found.

  Hello

  http://www.google.com./search?hl=en&source=HP&BIW=1248&BiH=840&q=mantWGE2.dll&btnG=Google+Search&aq=f&aqi=&AQL=&OQ=

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Photosmart C309a "hpqcutil.dll file not found."

  The printer worked fine until this day, when I got the error message.

  Windows 7 SP1

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-66918-4&cc=us&DLC=en&LC=en&OS=4063&product=3737195&sw_lang=

  This is for the 64-bit operating system, which I am assuming you are using. This is the full functionality driver and software. Reinstall it

• stop Java download with bin\awt.dll problem, file not found

  bin\awt.dll: old file not found however a file of the same name were found no update because the contents of the file do not match.
  Java update fails to apply the changes to your system.
  Java, set up the error # 1722.
  These are the messages I get when I try to update java.

  If all else fails then I uninstall Java and download it from scratch

  Try to uninstall Java versions installed via the "Control Panel > Add and Remove Programs".

  Install the latest version of Java .

  • http://Java.Sun.com/javase/downloads/index.jsp (Java platform: download JRE)

  See also http://raproducts.org/javara.html RaProducts - JavaRa documentation

• File not found when you try to call a dll on LabVIEW Real Time machine

  I have a dll called "DLLRTTEST" that I wrote, and claim successfully on my host.  Now, I try to call this dll from a vi that is on my computer in real time.  Currently, I get a message 'error 7 occurred at the crux of library DLLRTTEST.vi. call function' when running

  In the attached screenshot, I try to ensure that the vi that I am running is indeed on the system in real time.  I then use a 'check if file or folder Exists.vi' to confirm that the dll that I'm about to call exists on the system in real time as well.  However, I always get an error "error 7 file not found" from the node call library feature.

  Any help is appreciated.

  Thanks again for all the responses.  As I said earlier, I had already met and solved the problem identified in the link provided by Nathand.  I had to go down to Visual Studio 2008 to go beyond this particular error, after which the app of auditor of the dll in real-time reported my dll needs to run successfully.

  I just got the phone with Jack in charge NEITHER well, and it turns out that I simply had to compile my dll in release mode.  Decommissioning of VS 2008 I got the correct version of dll (msvcr90.dll), but since I am compiling in debug mode, I found myself using msvcr90d.dll (d for debug) who doesn't have my computer in real time.

• File CoreFoundation.dll was not found

  From the start of my PC, I get a warning that says file CoreFoundation.dll was not found. How can I reinstall this file in my PC. My system is Windows XP.

  From the start of my PC, I get a warning that says file CoreFoundation.dll was not found. How can I reinstall this file in my PC. My system is Windows XP.

  Hey Engineer747

  the apple information below support can help you "CoreFoundation.dll file is missing.

  http://support.Apple.com/kb/TS2211

  1. If iTunes is still installed, Uninstall iTunes.
  2. Download and install the latest version of iTunes.

  

  Still need help? Take the Express Lane to contact technical support

  Use Express Lane to contact an expert on Apple support for custom and practical support.
  Get started

  and vista forums, you are

  Here is a link to the forum programs xp if necessary

  http://social.answers.Microsoft.com/forums/en-us/xpprograms/threads?filter=AllTypes

  Walter, the time zone traveller

• Run-time error '48': file not found t2win - 32.dll

  Since I've updated my Astrocalc program I can't program to open on my desktop. I get the message: run-time error '48': file not found t2win - 32.dll.

  You have any ideas how I can fix this problem please?  I have been trawling the web for months on and outside, but had nowhere :-(

  Gill

  The file t2win - 32.dll is a Visual Basic Runtime file that should be installed by the AstroCalc program.

  Suggest you contact them and get the latest AstroCalc version that supports Windows 7.

• L10 start problem - "SHDOCVW.dll is not found.

  When I start my laptop there is a message 'SHDOCVW.dll is not found' instead of icons on the desktop and I can't use my laptop more. Please help me cause I'm new user only. Thank you to.

  Hello

  Check it please this page http://www.pcfixtool.com/dll-errors/2339/2/required-shdocvw-not-found.html

  I hope this will help you understand what is happening. You can try to start the machine in safe mode by pressing F6, while the unit will start and try to install a new copy of the file manually. Check out this page http://www.ascentive.com/support/new/support_dll.phtml?dllname=shdocvw.dll

  You will find a brief explanation how to do this.

  Good luck!

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• LoadPanel fails with error-94 file not found code unless I am in debug mode

  I've written a dll that has a number of panels in a .uir file.

  When I have it, debug using "debug SeqEdit.exe", everything works fine.

  But, if I just use "run SeqEdit.exe" (without debugging and using the same sequence file, I get the error message:)

  "Error in the call to LoadPanel.

  Handle of parent of Panel: 0,

  The IUR filename: HiPot.uir.

  Resource Panel ID: 4.

  Error code:-94

  File not found. "

  The IUR file is always in the same place, the only difference is that I do not use the debug option.

  It's probably something simple I've forgotten?

  You should not use LoadPanelEx in this case?