MFELX1 62.5/125um fiber, could go far to how?

I am currently a network of design IP cameras, but they want to use the existing fiber, which is 62.5/125um multimode fiber.

So I chose SG300-28SFP + MFELX1.

But MFELX1 with fibre 62.5/125um, could go to find out how far?

Diameter of the nucleus will affect the transmission distance.

Here is 62.5 microns, the light along the fiber attenuation will be more, I think that 3 dB/km.

If the diameter of the core is about 9 microns, mitigation will be less, 0.25dB / Km.

Tags: Cisco Network

Similar Questions

  • I can't open my pictures folder. Error message says I don't have permission! I ran disk utility and found no errors. How this could have happened and how can I fix this problem? I'm the only user.

    Suddenly, I can longer open my pictures folder. I tried to move a picture to the folder to see what is happening and received an error message saying I was not allowed to display the contents of the folder and if I move the picture here, I won't be able to see. I ran disk utility and found no permissions error.

    How this could have happened and how can I fix this problem? I'm the only user. No one else has ever physical access to my computer. However, I sign up for Skyhub a few weeks ago and copied the contents of my Macbook it. Since then, a "Remote disk" icon on my hard drive. This would be part of the problem?

    Select it, choose get the information on the file menu, open the section sharing and permissions and give you access.

    (141083)

  • I think someone is sneaking my iphone 6 s. they ve probably take my IMEI code... could someone tell me how to stop this please?

    Hello!

    I would like to ask how to stop my iphone sneak? I have an iphone 6 s. I bought it out of my country and I can't send it back. I think someone took my IMEI code and everything now can be seen on my iphone. Please could you help me how to stop this?

    I already did a reset completely, but I don't know if it's useful.

    Thank you!

    The phone is jailbroken?

    You share an Apple ID with anyone?

  • Windows service install could not be consulted how to fix this?

    Windows service install could not be consulted how to fix this?

    Hi raptor05

    What exactly happens when you try to install a program that needs this service?

    Try these steps and see if it helps you:

    Unregister and re-register Windows Installer.

    To do this, follow these steps:
    1. click on start and then click Run.
    2. in the Open box, type msiexec /unreg and then press ENTER.
    3. click on start and then click Run.
    4. in the Open box, type msiexec/regserver, and then press ENTER.

    NOTE: you must log in using the administrator account and try to install it like that. Or you can also try running the program by right clicking and select "run as Administrator". It should work.

    We need to install the latest version of Windows Installer that is 4.5, the link to it is:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    After back and let us know if it helped to solve your problem.

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Hi, could you tell me how to put the app icon

    Hi, could you tell me how to put the app icon. By what your code?

    usually, set you the application icon in the properties of your application.

    You can also use the HomeScreen class to change the icon or set an icon of overview.

  • Our internet service is too slow them download Adobe Creative cloud to another computer and burn a DVD to install in the iMac on the right. Could you tell me how can I download the suite?

    Our internet service is too slow them download Adobe Creative cloud to another computer and burn a DVD to install in the iMac on the right. Could you tell me how can I download the suite?

    Hi daniela34135887,

    I'm sorry but it is not possible to download Adobe CC and burn it to a DVD and then transfer it.

    Only, it downloads a small setup file and on executions of this entire process of download, extraction & installation file begins that requires the internet connection. At the end of the process of the application is installed and ready to use.

    So, you will need to do it on your computer.

    Kind regards

    Nicos

  • I went to Adobe BrowserLab to preview and Internet Explorer was told that the page could not be found, how can I access BrowserLab?

    I went to Adobe BrowserLab to preview and Internet Explorer was told that the page could not be found, how can I access BrowserLab?

    Browser lab is long gone.

  • I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

    I want to create a Web site where people can choose a date and time and click on search, and it will find the photo of my HARD drive and show them on the page, is that poosible? If so could somone tell me how I will pay?

    On your local HARD drive? N ° on your web server? Course

    How do you know php? There are exif function that can read EXIF headers on your images. You can use it in conjunction with the functions of file system scanning of the images on your web server. If you have thousands of images, you want to index the results in a database rather than search the real-time file system.

  • Could someone tell me how to stop the folders and icons rearrange themselves

    Before I updated to El Capitan I could arrange the files on my desktop or in any folder in the finder, in order that, I opened I wanted and they would REMAIN THAT of the WAY. Now, folders and icons in the folders reorganize themselves, usually in alphabetical order, each time that I add, delete, or move something in a folder. This causes a serious pain for me and make my extremely inefficient workflow.

    I managed to stop the folders on my desk of reorganization by going to view > options > sort by selecting: None (thanks Mac forum) and I can do this in a folder if I want to rearrange things myself, but I seem to need to do this individually for every single folder and there is no guarantee that the next time I turn on my computer it will be always in that order. El Capitan before I could move my files manually on my desk and in a folder and if things got a little messy, or I wanted to start, I simply chose sort > by name and everything would be perfectly back to alphabetical, as a grid, on the right side of my screen, or in a grid at the top of a file. AND... If I wanted to manually move a folder or icon after sorting by name, I could still do it, without having to go to tri: No. Now, if I say sort: None, which seems to be the only way to manually sort the icons or folders, all of a sudden my own grid of files are everywhere in my office or mixed into a folder, unlike before where they would simply stay in a grid in alphabetical order, making it much easier to find things when manually reorganize. In my workflow, I need to be able to fix things and make them stay there, then, how do it works as before. Is could someone please tell me if there is a simple way to get things to work like they used to, when the only time where my files or icons arranged themselves was when I SAID to THEM, keeping in mind I'm not that computer, so if it's code, or go beyond the preferences or settings , you've lost me.

    Click on the desktop, command J > sort by none

  • Firefox took my Diigo toolbar. I want to come back. I used it for years. Could you tell me how to get it back?

    I went to use Firefox and I got the message that she had taken my Diigo toolbar because it could not be verified. I've been using Diigo years. There a lot of very important bookmarks in it. I really need back.

    Thank you for your help.
    Kind regards.
    Jerry Horton.

    Addons that are not signed have been disabled in the latest version of Firefox, for security reasons. To reactivate this addon, follow these steps:

    1. Type of about:config in the address bar
    2. Click the I'll be careful
    3. Locate the xpinstall.signatures.required Boolean
    4. Change the value of the preference tofalse

    Note: You may need to restart Firefox so that the changes take effect.

    Warning: Following the steps above may present a threat to security. Please use with caution and at your own risk.

    For more information about the signature of the addon, please refer to this Mozilla support article.

  • Microsoft Silverlight will not - uninstall "patch package could not be opened" how to remove Silverlight?

    I worked the market for several weeks trying to remove my Microsoft Windows XP Edition edition family Version 2002 with Service pack 3 Microsoft Silverlight.  It can be removed with uninstalling the program because I gives me this Message: "this patch could not be opened.  "Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid windows setup hotfix package.
    I searched on the net for solutions and came across one showing an email from Nancy to the * address email is removed from the privacy * that detailed instructions for removal which did not work.  The instructions were:

    Step 1: Run the correction tool = 1.  Download and extract the accessory Fix '.zip' of this mail on the desktop.  I can't find any site highlighted in this e-mail to download the zip fix attached to my office.

    There were 2 steps more sure I can't even if I can't download this fix zip business that does not exist.

    Every night when I turn on my desk, it shows updates that need to be downloaded when I turn if turned off, then after delayed my trip to the bed for an extra 5 or 10 minutes he informs me that there is no silverlight 2 updates that they were unable to use... which of course I know for months.

    I don't know how my office put a hand on one program that can be removed or updated, but all I want to do is get rid of it without having to replace my hard drive.

    I'd appreciate any help that you can provide, keeping in mind that I am NOT a GURU and as such have no idea of what a hotfix or a hotfix Package is and would like to have instructions to remove this Silverlight program so it will stop embarrassing me, but if you could provide the removal steps which are not difficult to follow It would certainly be useful.

    Hi DonaldRandall,
     
    As you have tried various possible steps to solve this problem, I recommend to post your query in the Silverlight Forums for assistance on this issue given that the experts who can handle this problem well in there.
  • Could you tell me how I can get rid of an Office error message ' C.\Users\Murray\LOCALS1\Temp\355effff0000ccal.ex

    Can fix you my computer remotely on this issue? I have an office error that says could not load or run ' C.\Users\Murray\LOCALS'1\Temp\335effff0000ccal.ex?

    Thank you very much.

    I can be reached at 215-206-2399 or * address email is removed from the privacy *

    Thank you very much.

    Murray

    Hello Murray111,

    Did you do a full scan with your antivirus software and ran all the malware removal?  What antivirus software do you currently use?  How much time have you been affected by this problem, and you make changes to your system before that?

    Please let us know status.

    The malware removal:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/malware-called-antivirus-Pro-has-taken-over-my/3cb4a36a-6134-448C-A134-151d03fbd968

  • Windows 10 could not be installed-how remove this message from my first screen update?

    The deadline passed free installation. Everytime I open Windows Update (in Win7) I get no updates to accept or decline. Instead, I see a update initial screen that says "Windows 10 could not be installed."  How can I get rid of this message and feedback Windows Update for its normal operation and display, now that the thrust of Win10's past?

    I had the same problem. Go into the registry and remove the key from 'Dismantling' at the following location fixes the problem.

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade\Rollback

  • Please could someone help me how to activate Hibernate mode

    Hello, please someone could help me how to activate Hibernate mode, I don't remember what I did but am surprised inactive hibernation sleep and research. I would be grateful to get this help. Thank you

    Original title: Hibernation Mode

    Hello

    This should help you:

    «"How to enable or disable the Hibernate in Windows 7 and Windows 8

    http://www.SevenForums.com/tutorials/819-Hibernate-enable-disable.html

    See you soon.

  • Could someone tell me how to get this effect please?

    Hi all

    Use photoshop or illustrator, can someone tell me how I can get this effect of a normal picture please? I really like this effect.

    Thank you

    Sallyimage.jpeg

    It looks like the oil paint filter, with perhaps a slight blur. (Could be the picture too; every photo reacts differently). Oil paint is located under the filter > esthetics > oil painting. (Note that it is the latest version of Photoshop CC).

Maybe you are looking for

  • Download iPhone error Media

    I'm having a problem of downloading of media (photos) from my iPhone to my NAS. I have a ReadyCloud account and I created a folder in my home folder ReadyCloud account, no problem. I then put the iPhone settings to send media on behalf of ReadyCloud

  • Error code 080040609; Source - Messenger

    Cannot update the Windows Live Essentials.

  • Symantec regular virus analysis

    symmantec on-demand and virus scan manual gives report being arrested by user seconds after starting. How can I fix it?

  • White "fringe" through monitor U2715H

    Order number: number retired by the privacy policy of order > Agenda: Dell Ultrasharp Monitor U2715H Serial number: maintain the label removed by privacy policy > (not found online, cannot add to my products)Express Service code: abducted by the Expr

  • Updated standalone Cisco Aironet lightweight mode Access Points

    I'm trying to convert a stand-alone Aironet 1200 in light Mode. I use the tool to upgrade v1.0 proposed by Cisco. But when I put the name of the recovery LWAPP Image (c1200-k9w7 - tar.123 - 7.JA2) in the tool window to update it doesn't work. It is s