MFP m276nw thickness of the stripes on the side the impression, very light, reverse banding.

A printer that I produced a thick band on the printed side and a very weak banding on the reverse. I changed all the toners. Any ideas before I jump...

Sorted. The problem was due to 2 bad cartridges. I was wrong due to replace one by one the toners. It was a double fault or stray cartridges producing the same effect. Solved by replacing all the toners simultaneously then presenting one of the elders put one at a time until the fault has reappeared.

Tags: HP Printers

Similar Questions

  • DeskJet 3915 leaves the impression, flashing light, offline

    I am a newbie to computing > I checked to make sure that the ink from the printer is properly installed, that the paper is not blocked and that it is plugged into the computer and the power outlet... I feel this afternoon and 2 of 6 pages have been blurred, then he refused to print, said that it is in offline mode and the indicator light flashes. It is plugged into a usb port and I am running XP. Any ideas?

    Your welcome... I hope this would fix without having to replace the printer.

  • HP MFP M276nw: y at - it a driver of the HP MFP M276nw sierra

    Printer can be added through add printer process.  Print shops.  Not even a scan option!  Any ideas?  Thank you!

    Hi @LJA53,

    Thank you for joining the HP Forums!

    I noticed your post that you can not scan with your printer HP Laserjet MFP M276nw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

    According to the website Software and Driver Downloads , I see not all the drivers for this printer for Mac OS X 10.12 Sierra. Have you tried using Apple Image Capture for scanning or the HP Easy Scan software?

    If none of these work programmes, all we can do is wait for the software and drivers to be released, or plan to use Mac OS X 10.11 El Capitan until the software drivers come out.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope that this post helps!

  • HP 200 MFP M276nw not seen in the network after changing router

    Printer: LaserJet Pro 200 color MFP M276nw

    LAN: both PC (Windows 7) and the printer connected to the router.  Other devices connect wirelessly.  Internet service is cable.

    I installed this printer when a router Linksys E2500 was in use.  The configuration of the network after the installation of the printer:

    IPv4 address: 192.168.1.120

    Subnet mask: 255.255.255.0

    Default gateway: 192.168.1.1

    Configured by IP: DHCP

    I replaced the router Linksys with a Netgear WNDR4500 router (N900) a month ago.  Everything worked fine for about two weeks.  All of a sudden, jobs sent to the printer began to take a long time to start to print until they stopped printing altogether.  The printer does not appear as a device plugged (cable) in the interface of the router on the Web.  Not even the HP Print or HP Print software and the Scan doctor could find a printer is connected.

    I have unisntalled and reinstall the printer, but did not succeed until I changed the Ethernet cable connecting the printer to the router.  The difference is that the old cable Cat5e and replacement a Cat6?  It's printing and scanning now but the printer is still absent as a wired device, and I fear that it will stop working once more.

    I noticed that the network configuration of the printer after reinstalling is:

    IPv4 address: 169.254.230.140

    Subnet mask: 255.255.0.0

    Default gateway: 169.254.230.140

    Configured by IP: AUTOIP

    Research on the Web, I found an article saying that AUTOIP could be a sign of problems of router or a cable.  My suspicion is that the IP address of the printer is constantly changing and this is the reason for the delay of printing.

    My questions to the experts are: I could assign an IP address to the printer manually so I can add it in the router - it provides to this effect- and how this is done?   In the Toolbox of device HP under the IPv4 Configuration, there is a dropdown menu with different options - DHCP, BOOTP, AUTOIP, and manual, but I don't know if the changes are made here or if it's a more complex undertaking.

    Thank you very much.

    Kind regards

    Miguel remainder

    I solved the problem, the same day I posted the request for help.

    I've closed everything down - including the cable modem and router - but left the printer.  Go to the printer control panel and changed is manual configuration IPv4 of AutoIP toe.  I had already selected an IP starting with 192, since I read that starting with 169 IP addresses are associated parameters AutoIP.  From there on, the printer has presented a valid subnet mask addresses, I took one, and a default gateway address.  Then I stopped the printer.

    I turned on the modem, router, pc and printer.  The router then showed the printer as a device connected with his newly assigned IP address.

    I figured that the cable was not a problem here, so I put the Ethernet Cat5e cable.  What baffles me, is why the printer changed to AutoIP because it was not made by any user.  Check the reports printed during the first installation of the printer, I see that the method of IP in DHCP address.  After putting in the new router, changes were to name SSID and password in wireless devices and found the firmware of the router.

    It was learning by trial as I'm not a computer expert, but so far, we print and scan documents.

    Thanks to all who took the time to read the post and offered help.

  • HP OfficeJet 3830: Printer HP Office Jet 3830 print labels? I can't find any option to change the thickness of the p.

    I need to print labels, sometimes one and sometimes pages of them.  When I put a sheet of labels in the Office Jet 3830 (in Word 16) the stuck sheet and would not go through the printer.  I can't find any way to adjust the thickness of the paper, not something thick like a page of blank labels.  If the printer has this function, how can I activate it?

    @vjdetling

    Printer:

    Range of all-in-one printers, HP OfficeJet 3830

    Full software features:

    File name: OJ3830_72.exe

    The specificationsindicate that the printer software can handle one type of media (paper type), titled "letter of card Index".

    Set your printing preferences / Print Preview to include

    • Media type 'Index Card letter'
    • Paper size: letter

    If includes it the list of media type, you can also try 'Matte of the Brochure' (wording varies)

    Help, suggestions and examples:

    Print Labels_Business-Cards_Cards

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • IPad pro cable loading safely able to charge phone more than 6 s.  I noticed that it is thicker than the iPhone cable

    MY pro iPad charging cable is thicker than the iPhone cable loading.  It will damage phone if I used it to charge the phone

    the thickness of the cable have no impact on the load so not

  • Change the thickness of the main grid

    I use the xy graph and I need to change the thickness of the main grid (thicken)

    How can I change the thickness of the main gridlines?

    You cannot change the thickness.  Change the color to the place if the grid is less noticeable or more noticeable.

  • Jet Pro 100 MFP M175nw, is the Green standby light supposed to flash all the time

    Jet Pro 100 MFP M175nw, is the Green standby light supposed to flash all the time standby

    When the Green led is flashing, the printer is telling is in stand by mode. It should turn solid when a print job is sent to the printer. Your printer works as expected

  • When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

    When I make a rectangle, the left and right edges are a bit fuzzy and thicker, then the bottom and at the top. It seems very strange and I don't know why that is.

    I made a new document (72 dpi, preview mode: by default) and I tried to see if it's the same thing on another screen, and it is.

    I thought that the problem would be with the 'align on the pixel grid' property but by activating / deactivating it doesn't matter. Maybe it's something with anti-aliasing? "Work of anti-aliasing" is checked in my preferences...

    Screen Shot 2016-04-15 at 17.51.29.png

    Here's an example, zoom level 100%.

    The forms do not look sharp at all. No idea what this can be?

    Lieselot,

    Or you can try to switch between the GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

  • How can I change the thickness of the line on the Rectangle tool in Adobe Illustrator 12?

    How can I change the thickness of the line on the Rectangle tool in Adobe Illustrator 12?

    The object selected, use the dash Panel to increase the size of the stroke.

  • When I change the thickness (in points) of text/lines/etc by using the arrow icons the thickness of the line jumps instantly to 1000 pts. Why?

    ILLUSTRATOR - when I change the thickness (outline/stroke) (in points) of text/lines/etc by using the icons of arrow (upwards or downwards), the thickness of the line jumps instantly to 1000 pts. How can I adjust the settings to make this feature work, because I really need in many situations. Thanks in advance!

    1.JPG

    3.png

    koenk,

    The current pastor of the corrupt file bug/preferences units seems to be:

    (1) delete your preferences HERE (close HAVE and press Ctrl + Alt + Shift / Cmd + Option + shift during startup).

    (2) ensure that the parameters English (United States) system locale and the decimal point is. (dot/full stop, no, (comma) when the machine is restarted,)

    (3) launch HAVE again and see if the subject is cured.

    You can see a long discussion here:

    https://forums.Adobe.com/thread/1871389?q=units%20bug

  • Word to the thickness of the underline PDF

    Hi all

    I saw a number of previous discussions on this topic, and most of them still pending.

    When converting a Word 2010 to PDF document by printing to PDF Maker or by using the option "Convert to PDF" integrated, my highlights appear different thicknesses when I made them in word.

    -J' checked and all the features of underscore are set to the same size in Word 2010.
    -When in Adobe Reader, zoom in and out to change the relative size of the fact out in comparison with the text.

    -When you view PDF files in Foxit Reader (a PDF reader part 3) there is no problem and says all is correct, regardless of zoom.

    -As suggested by https://forums.adobe.com/thread/1053837 and https://forums.adobe.com/thread/305508 , I tried to change the dpi of my PDF Maker "printer" at 300 dpi, and then re-conversion, without success.


    Foxit shows properly, so I'm led to assume the work of conversion is correctly, but when seen in Adobe Reader is showing wrong. However, I want the PDF to be seen by many people, which most should not be used Foxit reader or any other PDF Reader, as well as my problem Viewer rises.


    Help!

    Hey everyone, I think that I thought about it. I have read this thread: https://forums.adobe.com/thread/620345?sr=inbox where Peter suggested to turn off "Enhance fine lines ' in the display options Page, which seems to have solved the problem. As I said, the conversion seems to have worked, but Adobe had it wrong, no doubt trying to increase the thickness of the thin lines for some reason any.

    Thank you!

  • Change line thickness is the element. Help! Never done this before!

    I have a simple box.

    I copy and paste in back (done 1,000 times before without any problem)

    I change the thickness of contour on the box in the back. Expecting to see the contour evenly push behind the frontcourt.

    Rather than keep the box exactly behind that in advance... change of the contour is MOVING THE BOX.

    I don't know what setting I hit to make it happen. It never happened to me before.

    I don't know where the setting is to remove it.

    I don't want the thickness of the outline to move the real item.

    It's ridiculous, but I can't understand what it does.

    Help, please!

    Thank you

    Looks like you have this kind of problem

    Illustrator: Problems with snap to grid of pixels

  • Change the thickness of the line on the grouped objects?

    If I change my style of animation art drawn by hand to the use of things such as the line tool and pen, in Adobe Flash CS3. I paint characters who have segmented parts, I.e. the arms, legs, head. body, ect are all separate grouped objects with a set line thickness. The problem is that when I try to reduce or to develop the character, the lines that make up their body is too thick or too thin, depending on whether I'm bigger or smaller. It seems that I'm unable to change the line weight of the grouped objects, or dare I say, a Group of grouped objects. The greys out properties panel when I select an object, so I have no access at all. I don't want to go and change the thickness of line individually on each object, whose lines are all the same thickness originally.

    Is there a trick or a plugin that I can use to change this, so the line weight of the grouped objects can be changed? Or am I just ignorant the right answer with myself? Whatever it is, I'd be REALLY grateful help could someone of you provide!

    Okay, so I seem to have found a solution more effective in my problem what I expected. I can just convert the lines into filling by going to edit > forms > convert the packaging lines. That makes it so the lines will now change of relative size depending on how much I shrink or push an object.

    Please try to all the world, but I found my solution!

  • Flash line thickness with the line/pen tool

    Hi all

    I'm starting work on an animation project where I'm very straight lines of vector, not something designed by the brush/pencil tool or things like that which are normally used in Flash animations. What I was wondering is, is there a way to transition smoothly between the weight of the line between 2 points?

    For example, I can set A point to a line of 1 weight/weight, then point B a weight of 2 and have thick smooth the transition between two different weights? I can't find a way to change the process of creation, I can't find a way to change it later.

    Thank you.

    HA aman that you don't need that you will find as more complicated for something like that!

    I think your right on with what you do I think that the pen tool is probably your best bet, or if you like to make art in the other tools you can always import it into flash if the creative tools in Illustrator or other better tool works you flash is really good with the import of art as long as you don't need to animate the actual art that might be easier.

Maybe you are looking for