MG52050 code error 5, 202, 54 with scaning

Similar Questions

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quic

  I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quickly. I'm on vacation and you want to read. Thanks for the quick response.

  Yes, actually I talk about digital editions. Do you know how to solve the problem, as stated in my first mail of Digital Editions? Thank you for your kind cooperation.

• code error-8072

  I can't empty my trash. The operation cannot be completed because an unexpected error has occurred (code error-8072).

  Does anyone have an idea what this error code means? Or better yet, how to fix this?

  Stop

  Unplug your external devices

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Check your hard drive with disk utility

  Using disk utility to check or repair disks - Apple Support

  then empty the trash

  Stop and reconnect the devices and start normally.

  If the problem persists, check your system with AHT

  Using Apple Hardware Test - Apple Support

• How can I fix the code error 56?

  Two years ago, I bought my iPhone6 (to the US Apple store) and I used iPhone6 in South Korea. So, I can't take refurbish here.

  When I was trying to update iso 9.3, pop up code error 56 at the end of the update process. so, I removed the chip from the usim card and tried again. but the pop-up code error 56 again. How can I fix this error?

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Webloc changed Safari icons: code error-10823

  This morning when I turned on my Mac, I noticed that all my Safari webloc icons turned into another (basically @ sign and HTTP in the icon). When I right click the icon's default implementation "Simulator.app (9.2). By tradition, Simulator.app is part of Xcode. However, I've updated or use Xcode or any application that is part of Xcode in the past 2 weeks (approximately).

  Yes, ok, let's change the default application associated with "webloc" icons for Safari. Right-click. Default app for Safari. I get the error shows: "the element is locked or damaged, or in a folder you have not allowed to edit (code error-10823)."

  After removal of the dialog box, I get another dialog stating: " ""the operation cannot be completed. An unexpected error has occurred (code error-10823). »

  I have restart mode without failure. Same question. I can't find something on the code of error-10823 and on why a land I would get this message that the element is locked or damaged.

  Any ideas? Thank you.

  Mac mini end of 2012

  El Crap 10.11.3

  Although the problem is not the same, please follow the instructions in this article to support to reset the launch Services database. Instead of typing the shell command in the article, I suggest that you copy and paste the web page in the Terminal window. Make sure you only select the entire line. One way to do that is triple - click anywhere in the line.

  If you do not already have a current backup, back up all data before proceeding. You should perhaps log out or restart to see a change.

• Satellite A40 - 10 - D drive: for code error is not found

  HELP PLEASE!

  I really need help to fix errors on my system.
  A few moments ago I accidentally deleted the DVD player + / optics to my laptop, and when I go to my computer, it's not here?
  The sys. tells me that the D: drive is not found, and the disc has been removed without preparation and cannot be found, error code 10.

  What this means, as I tried to update the BIOS and it didn't need, and I can't find a driver for the A40 Satellite from Toshiba.
  In addition, drivers seem to be ok and the boxes are checked in the device management, even if the optical drive has sometimes a yellow exclamation?
  Tried the recovery disc and no luck.
  Also the drive does not work now, because it does not read discs!

  Here is the Spec for the computer, as well as the summary for error messages. Reallr wouild appreciate any help on this please...

  My computer science - general

  Please wait while the information gathered...

  100% (collecting Local disk information)

  Refreshing the screen
  Specifications
  TOSHIBA
  System model: Satellite A40
  BIOS version: TOSHIBA Version 1.50

  Operating system
  Microsoft Windows XP Home Edition
  Version: 5.1.2600
  Service Pack: 1.0
  Location: C:\WINDOWS
  PID: 55277-OEM-0011903-00111
  Hot Fix: Q817606

  (Vivid RAM) memory
  Capacity: 2 GB

  Here is a list of the Dr. watson error reports that appeared the donation system.

  January 25, 2009 Service Control Manager the Application Management service terminated with the following error: the specified module could not be found.

  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.

  January 25, 2009 Cdrom driver detected a controller error on.
  January 25, 2009 atapi the device, \Device\Ide\IdePort1, did not in the expiration time.
  January 25, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom
  January 25, 2009 PlugPlayMa swim the device ' S I t A D D - M R - 6! 1 '' ' (IDE\CdRomT_S_I_A_D_D-R_M_S_-_ 6! 1 '___1 #3' 423362730283321372620202020202 020202020 ___\3) disappeared from the system without first be prepared for removal.

  January 31, 2009 Cdrom driver detected a controller error on.

  January 31, 2009 Service Control Manager boot start or system start (s) what follows could not load: Cdrom

  January 24, 2009 Applicatio n error Faulting application helpctr.exe, version 5.1.2600.1106 failing module kernel32.dll, version 5.1.2600.1106, fault address 0x0001a67a.

  January 25, 2009 MsiInstall product Re: ParetoLogic DriverCure - 1722.There error is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action DeleteScheduledTask, location: C:\Program Files\ParetoLogic\DriverCure\D riverCure.exe, command:-deletetask

  January 25, 2009 Applicatio n Hang Hanging application switch.exe, version 0.0.0.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

  Hello

  Akuma is right. I tried to find Microsoft document about this, but somehow the old links no longer work.
  In any case, after removing the Upperfilters and Lowerfilters optical drive should be recognized correctly again and you can use it again.

• message of undefined LabVIEW on custom codes error code

  "I use the VI General error handler to define custom errors, I have inserted all entries for this vi (user-defined descriptions, codes, user-defined error code, source of the error, type dialog and error in) but some I still get the message:"

  This error code is not set. Undefined errors can occur for several reasons. For example, no one has provided a description for the code, or you could have wired a number which is not an admission of error code error code.

  In addition, undefined error codes can occur because the error concerns a third object, such as the operating system or ActiveX. For these mistakes of third parties, you may be able to get a description of the error by searching on the Web for the error code (5501) or to its hexadecimal representation (0x0000157D). "

  Why? someone, anyone, help!... Thank you very much

  How you use the error handler General VI? Do you have examples of code?

  The following code displays the error dialog using my custom error description and the 'message' is also used my custom error description:

  

  The error is not changed - if I go to "explain the error", he then returned to the standard description for this error code (i.e. undefined). Using the Manager general error applies only the descriptions of the user to the call of the VI. You can always create a wrapper for the General error handler that has all your descriptions/error codes defined and then use it instead of the built-in one.

  To change the database from LabVIEWs internal error and/or include with a built application (one of the build specification options), you must use the custom error files.

• Cannot open not Ultimate traffic, get code error 339. Impossible to uninstall the game

  Original title:-Thei have traffc ultimate instald on my computer and when I go to open the program t gives me an error code 339 and trying to uninstall cant

  the programe of flight sim is 2004 and the program works fine. Its the ultimate traffc giving code error 339

  Hello

  (1) operating system do you use?

  (2) since when are you facing this problem?

  (3) don't you make changes to the system?

  (4) was this works much earlier?

  
  The problem is caused by programs such as firewalls, anti-virus and Anti-Spyware software programs running at the time of installation. Please, close them and try to reinstall.

  Method 1: Perform a clean boot

  Follow the steps in the link below to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Check if the problem persists.

  Method 2: Disable the security software / firewall

  Temporarily disable all firewall and security software and check if the problem is fixed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Enable them after you perform the troubleshooting steps.

  It will be useful.

• Updates Windows 7, to get codes error '646' and 'dt000 '.

  When you try to install the updates, the error code 646 occurs. After the patches recommended and routine brings me to Microsoft with potential charges or here for the real experts. Can anyone help?

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  This update didn't install when I used Vista and is still unable to install now, I updated to Windows 7.

  Have searched for a solution for months with no result. Reason why I updated.

  Any help much appreciated.

  DOUGY,

  Microsoft SQL Server 2005 Express Edition Service Pack

  Post here for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  --

• Code error 8024002D

  My operating system is Windows 7 Professional 32-bit; an upgrade to Windows XP Edition family.  In addition to office 2007 Windows Update Office Genuine Advantage important Notifications (KB949810) update, installation failed repeatedly, Windows Update is up-to-date.  My anti-virus program is F-Prot for Windows and signature files are up-to-date.

  When installing a dialogue will appear asking:
  'Insert the disk "Notice 2.0.0048.0 OGA" and click OK' I don't have this drive.  When this dialogue is canceled the Windows Update poster window installation failed with error code 8024002D.

  A Google search on the code error 8024002D and a search of this forum led to perform an installation of this update.  I can't find the update in the MS Download Center to allow an attempt a manual installation.

  I would appreciate any advice on the steps needed to overcome this failure.

  Malcolm Walker

  Malcolm Walker

  Error code: 0x8024002D
  means - a full-file patch has failed because the source was necessary

  Why not see if place for Office installation media in the drive corrects the situation.

  TaurArian [MVP] 2005-2010 - Update Services

  TaurArian,

  Thank you for responding.  Good idea, but unfortunately without success.  The Windows Update Setup program could not find the file, and with a manual search OGSNotifier.msi does not seem to be on my Office 2007 installation disc.

  On the MS Website I found the OGAControl.cab file but could not work on how to install the INF file it contains.  However, from the Download Center, I reached the area of validation of the Genuine Advantage pages and facilities of my Windows 7 and Office 2007 validated successfully.

  So I hid the KB949810 update in the hope that it will be the end of this problem.

  Malcolm Walker

• code error 646

  Remember - this is a public forum SO never to post private information such as e-mail and phone numbers

  Ideas:

  • Quebec, you have problems with programs
  • I get a code error 646 pour updates of windows
    Microsoft works8: KB977304
    Microsoft office systeme:KB973704

  path of Microsoft information: KB976416
  Microsoft Word: KB974561

  • Error messages
  • recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Sorry no French here - at the very top where is says 'United States - English' - click on the low arron
  and select French.

  http://answers.Microsoft.com/fr-FR/Windows/default.aspx

  -------------------------------------------------------

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• DAQmx also write Analog DBL 1Chan 1Samp down of released NI USB-6009 - code error-200077

  I'm trying to get 5V 0V high low output of ao0 to an NI USB-6009 based on a switch in LabVIEW using DAQmx writing Analog DBL 1Chan 1Samp.

  When you use a voltmeter connected to ao0 and analog-ground on NI USB-6009; Im not getting anything.

  I also get code error-200077 for some reason any:

  DAQmx Start Task.vi:4
  Property: AO. Max
  asked the value: 10.0
  Valid values begin with: 0.0
  End with valid values: 5.0

  Channel name: Ao0/Dev1

  The task name: _unnamedTask<28425>

  Set the configuration output terminal to the CSR instead of by default.

  Five maximum value and the minimum value to zero.

  See attachment.

• "windows has no start windows on the local computer search... code error 2147218141".

  I had to fix it several times and now does not yet: "windows does not have start windows on the local computer search... code error 2147218141".» I ran sfc/scannow, not received any error.

  Microsoft FixIt couldn't help.

  How can I do this time?

  I tried method 2, but things have just gotten worse.

  I see now 3 new errors:
  1: TL - bootstrap.exe has encountered a problem. I believe that it's associated with my smartphone.
  2: exception processing message c0000013 parameters 75b65f7c 75b65f7c 4 75b65f7c
  3: DrWatson Postmortem Debugger has encountered a problem and needs to close.

  Ugh!

  ------------------------------------------------------------------------------------------------------------------------
  Looks like I found a solution. I found that I still had
  WindowsSearch-KB940157-XP - x 86 - enu.exe in my file of download of one of the (now how many) times past, I had to solve this problem. I did a re-install and it seems that the Outlook and the Office up and running again.

  Phew!