MG6220 now by default setting 2-sided copy

My PIXMA MG6220 has suddenly decided to always default to a copy setting on 2 sides after working normally for many years. This only affects the manual copy. Printing from the computer works well and correctly uses the default values for the computer game. Before you do a manual copy, I can manually set the settings on the printer for 1-sides and it works fine, but as with the other print settings (like the size of the paper, etc.), it is up to the time when the judgment or the "home" button is pressed. I tried to unplug and plug the printer in, no luck. The default copy print 2 sides is always present. Is there a way to force the default copy of the printer settings? Thanks for any help.

Jim

Hi Jwpottberg,

We can reset the printer to its default settings to try to get the copy settings, go back to double as a default printing.  To do this, please follow these steps:

1. ensure that the machine is turned on.

2. Select settings on the HOME screen.

3. Select device settings, then press the OK button.  The device settings screen appears.

4. use button to select the Reset parameter, then press the OK button.

5 use the button to select the parameter settings only , and then press the OK button.

I hope this helps!

It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

Tags: Canon Printer

Similar Questions

  • Installed a theme that did not work, now the default theme is bad too!

    I tried "Modern tool for XP icons", but did not notice the part "for XP" until after I installed it, so I took off and I went back to the default value. Unfortunately, now the default theme will show all of the colors; It's just white symbols on the bottom. Even the protected part of the URL bar is a few shades of gray. What can I do to retrieve the value by default as it should?

    You can try to backup the list extensions via Firefox help (Alt + H) > troubleshooting information > copy to the Clipboard.

    In almost all cases, abandoned extensions would already have either a better alternative or fork the best maintained. You can try to search using common words or variants via Firefox Tools (Alt + T) > modules top-right or @ AMOsearch box. For themes, also try Personas for Firefox.

    If you want to try new, experimental features currently missing, please see these alternatives:

    Beta

    Aurora

    Every night

    UX

    The Beta version is the most stable in this order.

  • hp8600 and the option "default set" useless on the printer

    It's maybe just me, but when I try to copy something, short of going deeply 3 pages in the menu options, the printer will attempt to use tray 1 even if "default" is set to 2. No change to the "lock" settings seems to make a difference.

    Is it just me (am I missing something) or is this all just evil genius...

    From elsewhere even if I unlock all the bins that he will not attempt even use tray 2 (as I was led to believe, so the need for a framework 'plateau of lock')

    IF you set the printer for "failure to sandbox 2" iteself it is abosultely no reason you need to go through the menu...

    In other words, it's STRANGE behavior...

    I found a way to set the default value for the copy in tray 2.

    If you are ethernet or wireless connected, then you can set it in the built-in Web server.

    * Note the IP address of the printer

    * Type the IP address in the address bar of your favorite browser

    * Select the settings tab on the built-in Web server when loading

    * Select the default settings under the copy option in the left menu

    Here you can set the default for tray 2 and not have to manually select each copy.

  • How can I change the default setting of font size and type when using e-mail?

    When sending an email, I have a default setting of the Arial font to 10 points. If I change what it comes down to Arial next time I use it. I don't know how to change the default setting.

    Hi Robin,

    What e-mail program you are using (name and version)? Windows Mail, Windows Live Mail, Outlook, a program that you access through your browser (and if yes, what name and version of the browser?) something else (and what version and/or year of this product)?

    What Version of Vista you are using (for example, 32-bit Vista Home Premium SP2 or other)?

    Thank you!

    P.S. I am pretty sure that the procedure is simple and can be done-, but it varies depending on whether you use, so I want to provide the information that is applicable to you.

    **********************************************************

    EDIT: Just a few alternatives which may help:

    If Windows Mail, go to Tools / Options / compose / font settings (ditto for fonts Signature if you use signatures) and change it to anything you want.  Save the changes and close Windows Mail, and then reopen it.  Your default sending policy should now be what you set with this configuration.

    ************************

    If Windows Live Mail, this MVP following is courtesy of Michael Santovec,:

    "You use the Windows Live Mail (WLM) installed on your PC or the.
    Hotmail/Live.com Web site?  If in case of doubt, by reading an e-mail message has
    Help (ALT + H).  If the help pop-up menu and the last item will say 'on '.
    Microsoft Windows Live Mail"you use the WLM (2008/2009) program.  If she
    'About Internet Explorer', says, you use the Web site.  If the House of Ribbon
    Select instead of the Help menu, you are probably using the version of WLM 2011.  TO
    check the selection ALT + F, about.

    For questions of Hotmail (Hotmail.com/Live.com/MSN.com), use these forums
    (Including the use of the website of Hotmail and Hotmail account problems)

    http://windowslivehelp.com/product.aspx?ProductID=1

    Set the default font for new messages - only applies to messages in HTML format

    -WLM-2008/2009: tools (ALT + T), Options, dial
    "- WLM 2011: ALT + F, Options, Mail, compose.

  • What is the average of default setting in the subject area Permission screen in SPR

    Hello gurus,

    We use OBIEE 11.1.1.7.150120. Trying to figure out how to play the permissions on the domain object.

    What is the average of the 'default' setting?  It translates to 'Read-write' or 'Read' or 'access forbidden '?  or business being a top-level object, the parameter 'Default' basically inherits the permission set for the application role "AuthenticatedUser"?

    Thank you

    Rakesh

    Hello

    Here is a copy/paste of the 'help' in the administration tool:

    By default. The permission is inherited from the parent object. Areas, because they are a higher level object, default value is equivalent to the permission granted to the application role AuthenticatedUser.

    If you ask for materials, 'default' in this case means same permission as an authenticated user.

  • How to reset the driver Nvidia to the default setting? (HP dv-1275dx)

    I have display problems after the last version of Windows up to date with my screen. Now he blocks every two minutes. How to reset the driver Nvidia to the default setting? (HP dv-1275dx)

    Thank you.

    the Device Manager > display adapter > choose card > driver rollback

  • How to remove the repetition as a default setting for messages?

    Whenever I have create a new alarm, or ask Siri to set a snooze alarm is activated automatically, which is something really annoying I need to turn it off later. Is it possible to change this default setting, or even to delete the function snooze completely?

    Thank you

    No, you cannot change the default values of the system.  You can propose your idea to Apple at http://www.apple.com/feedback/

  • What is the default setting for the homepage of the new tab in firefox?

    My browser has been hijacked, I need to reset and I don't know which is the default setting. I would use the new firefox tab layout.

    See:

    The URL of the new tab page is on: newtab

    The build-in home page URL is on: home.

    If there is a problem with the build-in on: home page and then try to reset the search engine used on the subject: homepage.

    Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the topic: config page and close and restart Firefox to restore the on: default home page.

    1. Open the topic: config page through the address bar
    2. Type in the filter bar: mstone
    3. Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
    4. Close and restart Firefox

    If this did not help, then remove the button Delete the chromeappsstore.sqlite file in the Firefox profile folder and repeat the foregoing.

  • HP Officejet 8610: Cut 2 sided copy printer interface

    I need help turning off two-sided copy using the inetrface on the printer. I have no problesm but cpying printer problems. If I print two pages in two original copies, the printer wants to enter the page firstcopied and pull of iut in the printer to copy the second page.  I want to turn this feature off and I turn it on when necessary. Thank you.

    Hello

    Thank you for using the HP Forums.

    From your printer Panel > copy > copy the settings (gear icon)

    Under copy settings, make sure that your 2-sided copy has the value "1:1".

    Hope that helps!

  • LaserJet Pro CM1415fnw: Change the default setting for the file tif to pdf on LaserJet Pro CM1415fnw

    How can I change the default setting from tif to PDF when scanning?  I can't find the "Advanced settings".

    Hi @kkeach,

    Welcome to the Forums of HP Support! I see that you want to change the setting in PDF format when scanning documents. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Did you download and install the drivers and software HP LaserJet Pro CM1415 multifunction printer full color or a Windows Update used to install the drivers?

    You use the HP scanning software?

    I submitted this document to change scanning settings using the HP scanning software.

    Multifunctional HP LaserJet printers - how to scan (Windows 8).

    Here is a screenshot of the HP Scan software and what options should be available:

    If there is anything else I can help you, let me know. Thank you.

  • default setting of the entry in the ini file?

    What, in v2011, is the default setting in the ini file AllowMultipleInstances value? I know this isn't a field normally included in the generated ini file when an exe is built, I wonder what the value is default? I've added in the ini file, set to False on a machine, I try to solve problems which has a launch program so slow that operators often go back and try and start again, which results in two instances, only that works properly.

    Test with any simple program, it seems that the default value is false, as usual.

    Maybe your executable is so heavy during the loading time is not "recognizable" a later instance for a long time?

    In this case, you can write a slight stub program that will be launched by the user instead of the main.

    The heel should run at hand via a file cmd or SystemExec; It would give fast feedback to the user; It should stay for enough time to leave the main appear, then stop itself.

  • Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

    Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

    Hello

    You did changes to the computer before the show?

    Method 1
    I suggest you to run the fixit from the following link:

    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2
    I suggest you register the Msado15.dll file required.

    a. Click Start and then click Run.
    b. in the run dialog box, type the following commands in the Open box and then click OK.

    Regsvr32.exe ">"

    The> placeholder is the absolute path of the file Msado15.dll.

    The following examples show how you can specify an absolute path:

    Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"

    If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

    DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
    c. click OK.

    Method 3
    I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

    Method 4
    I would say that you can download and install the update to the clean boot from Microsoft download center.

    Update security for Windows XP (KB2698365)
    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

  • When I turn on my computer, I get a bubble in the lower right of the desktop that says: "a program has been blocked from editing your search default setting". Then "click to change your notification settings."

    Whenever I turn on my computer I have a bubble in the lower right corner of the desktop that says: 'Search Settings Notification' then 'program has been blocked from modifying your search default setting". Then "click to change your notification settings."
    When I click I get a box called Toolbar Options. Tab shows the search parameters. Statement: "search settings protects your search settings of the browser to keep the programs change without your knowledge." I am then presented with 2 boxes checked with the following instructions: 1. protect my browser default search and let know me of any attempt to change it.  2. enable the browser error Network Wizard page.  Downstairs, the options are either save or cancel.
    My question is what does all this mean? Should I uncheck boxes or both? How can I avoid this message occurs ever time I turn on PC?
    I must tell you that my browser is Mozilla Firefox.
    Thank you.

    original title: Notification settings search

    Hello

    I would check the first box for sure, the second is not as important but probably a good idea to choose from as well. Once you save it, it should not appear again.

  • When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST. How to change this default setting.

    When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST.  How to change this default setting.

    Hello combat


    Open Windows Explorer/Tools/Folder Options

    On the general tab, click the options you want.

    In the view tab, click the options you want.

    On the view tab, click apply to all folders.

    Click Yes, then OK

    .

  • M277dw MFP: Double-sided COPY (do not print) with the ADF and MFP M277dw color printer

    This unit can perform a copy front and back on a pile of documents front / back, loaded in the ADF? (I know that it is able to copy both sides of a single page).

    In the list of options in control panel touch control for "duplex", it has classified 2 options from which to choose:

    1 - face to face 1

    1 - face to face 2

    It seems that I need a "2-sided to 2 faces" option, correct?

    It seems that the device must be capable of 2 faces double-sided COPY and more double-sided printing.

    I tried several combinations of different settings but cannot figure it out (if it is even possible) to take a stack of documents face 2. Put them together in the ADF and the output device an identical pile of copies 2 faces.

    Thanks in advance for any help/suggestions.

    Hey @AA10,

    Welcome to the Forums of HP Support!

    I see you try to double-sided copy on your HP Color LaserJet Pro MFP M277dw. There the duplexer to print system which allows you to print 2 sides, but does not have a duplexer built-in automatic document feeder. That's why you miss the 2 head to head 2 under the menu copy option. The two-sided to 2 in the menu copy allows you to copy documents two unique faces the printer would then print 2 sides. You must copy a page at a time and return them to make Copies in duplex.

    Please let me know if you have found this information useful.

Maybe you are looking for