Mgmt of RVS 4000 HTTP interface blocks Port 80 @ &; DHCP stops working
It's the RVS 4000
Firmaware version 1.3.3.5
STARS Chipset 9202
64 MB DRAM
8MB Flash
BACK, Block WAN Rq, mgmt remote all OFF
IPSec Tunnel that none used
Internet connection is DHCP
LAN is set to DHCP with multiple defined static devices
DMZ is dsabled
Functionining as a gateway
Time is defined via NTP & NRC
IPv4 only
Everything is pretty much dedault with the exception of the QoS
Trust mode is the Port, the value 4, 4, 4, 1
(Port 4 has a Linksys ATA connected to VOIP services)
SIP Port redirection is enabled for 5060
**********************************************
¸*********************************************
Every day or so the router becomes immune to the mgmt HTTP interface, as well as offers are no longer the DHCP services.
When this happens the only cure is to reboot the power.
Everthing comes back on line very well, but NEWSPAPERS are initilaized so not given to understand what is happening.
My next step is setuo a syslog server and have copied newspapers.
Anyone see this kind of behavior before?
Any ideas?
Thank you
dalexop wrote:
It's the RVS 4000
Firmaware version 1.3.3.5
STARS Chipset 9202
64 MB DRAM
8MB Flash
BACK, Block WAN Rq, mgmt remote all OFF
IPSec Tunnel that none used
Internet connection is DHCP
LAN is set to DHCP with multiple defined static devices
DMZ is dsabled
Functionining as a gateway
Time is defined via NTP & NRC
IPv4 only
Everything is pretty much dedault with the exception of the QoS
Trust mode is the Port, the value 4, 4, 4, 1
(Port 4 has a Linksys ATA connected to VOIP services)
SIP Port redirection is enabled for 5060
**********************************************
¸*********************************************
Every day or so the router becomes immune to the mgmt HTTP interface, as well as offers are no longer the DHCP services.
When this happens the only cure is to reboot the power.
Everthing comes back on line very well, but NEWSPAPERS are initilaized so not given to understand what is happening.
My next step is setuo a syslog server and have copied newspapers.
Anyone see this kind of behavior before?
Any ideas?
Thank you
Hi dalexop,
All new discussions of small business (which includes the model of your router) migrated to the Cisco Small Business Support Community. All small businesses existing discussions have been archived here for reference. We made these changes to better serve all customers of Cisco now and in the future.
Visit the Cisco Small Business Support Community Home Page created specifically for Linksys and Linksys by Cisco community members.
Thank you!
Tags: Linksys Routers
Similar Questions
-
Mini Display Port has completely stopped working
So I bought a Mini Display Port to HDMI adapter and it has worked perfectly well for more than a month. That's until 3 days ago. Out of nowhere I plugged my HDMI into the adapter and the power led of the monitor turned on and after a few seconds of reading, "No Signal". I have to hold the power cord in the more odd angles to get even for the screens of mirror, and even in this case, the screen is static at 80%. I looked online and tried every single tip or solution I've seen without success. All my HDMI cords are fully functional as I tried each one with my PS4 and works perfectly, so this isn't the issue. I've never had problems like this with any other Apple computer. Probably because no other computer using mini display ONLY ports. If anyone has had this problem and found a solution please let me know, if I can try to get this working. I have a MacBook Pro 15 in. mid-2012 with the processor i7 under OS X 10.8.5
blmller2 wrote:
I have to hold the power cord in the more odd angles to get even for the screens of mirror, and even in this case, the screen is static at 80%.
This suggests a possible problem with the cord. I would like to make an appointment with an Apple store genius bar and I tested the unit and the power cord.
Ciao.
-
It was working fine until this morning. When I turned it on I was told an update for flash player was available and I hit install. There was a mistake and since then no touchpad. I tried the news of mouse in the Control Panel, but he said it works very well. Any ideas?
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should helphttp://captaindbg.com/how-to-update-drivers-on-Windows-7/ (works on win 8 & win 10) -
USB ports have stopped working on the Satellite C
Hello. Just turned on my laptop and found that the USB ports hafe has stopped working. No mouse and no external storage. Any ideas?
What USB port status is visible in Device Manager?
Are no yellow exclamation point visible?Expanded the USB hubs and region of controller and remove all the listed USB ports / controllers from the list of devices.
After that, restart the device.The system should reboot and the USB ports should be recognized and installed automatically.
Try this workaround short and report results.
-
I have a desktop HP p6000 computer, running Windows 7, and the VGA port should have stopped working. The monitor is no longer working or showing no signal. I tried the cable and the screen with my laptop and both work very well. I opened the side of the case, has blown all the dust inside, removed the 2 screws holding the port to attempt to reinstall the connection but impossible to remove.
Any help or advice would be greatly appreciated.
Thank you.
Try to start with a RAM only.
Try clear CMOS.
But maybe the graphics chip has disappeared.
You have an additional graphics card?
What exact model type of your pc?
C. -
Compatible Snaptics Ps/2 Port touchpad stop working, gives error Code 24
Last Thursday my Snaptics Ps/2 Port Compatible TouchPad stop working. Code 24 arrives. What is the 24 code and how can I solve this problem?
Hi linda3398,
Please see the following about the Code 24:
Code 24
This device is not present, is not working properly or is not all its drivers installed. (Code 24)Cause
The unit is installed incorrectly. The problem may be a hardware failure or a new driver might be needed.
Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.
You may need to update your drivers for the touchpad.
I hope this helps!
-
On recommendation of Cisco, I have blocked ports TCP 3127-3199 out my interface "inside". Seems that these are commonly used for mydoom ports. Now, when the user's browser uses these ports as source ports they don't have until it exceeds this window. Has anyone seen elsewhere this problem and how do you work around it?
Roland,
A MyDoom attack can be launched from the outside (entering your local network) or inside (out to your local network).
IF YOU WANT TO BLOCK INCOMING OF MYDOOM ATTACKS:
If this traffic passes through a firewall, then by default, the sessions opened from the outside are blocked unless explicitly allowed entering. If you use a router with ACL, then you must configure an ACL in the INCOMING direction and apply it to the interface from the OUTSIDE as such:
--------------------------
For routers:
access-list 111 tcp refuse any any 3127 3199 Beach
interface
IP access-group 111 to
--------------------------
In this case, you'll experience the question that you're already because when a web server returns a bunch of session to the client (browser), then the destination ports match the ACL and the router will drop the session. To remedy this, we can apply an IOS Firewall to the external interface of the router. The ACL to block incoming attacks of MyDoom cannot while the router will maintain session state information in its table.
IF YOU WANT TO BLOCK OUTBOUND MYDOOM ATTACKS:
Then the ACL must be applied 'in' on the 'inside' interface
--------------------------
For the PIX Firewall:
access-list 111 tcp refuse any any 3127 3199 Beach
access ip-list 111 allow a whole
Access-group 111 in the interface inside
--------------------------
--------------------------
For the router:
access-list 111 tcp refuse any any 3127 3199 Beach
interface
IP access-group 111 to
--------------------------
This should provide you with enough information to work on your issue.
Paragraphs
-
Hello
How about a readme for the new Signature IPS 1.42 inside the new firmware to version 1.3.2 RVS-4000?
Or am I just too fast and it comes out in a bit?
Thank you
Bruce
Bruce,
You are right. He left this time by mistake. We will solve it. In the meantime, here's what it will be:
RVS4000/WRVS4400N IPS Signature Release Note
Version: 1.42 rules Total: 1097
In this signature, we talked about the exploits/vulnerabilities and applications
as below:Supported P2P application called BitTorrent up to version 5.0.8.
Supported P2P application named uTorrent up to version 1.7.2.Version: 1.41 rules Total: 1098
In this signature, we talked about the exploits/vulnerabilities and applications
as below:-EXPLOIT the MS video control ActiveX Stack Buffer Overflow
A buffer overflow vulnerability exists in Microsoft DirectShow.
The defect is due to the way Microsoft Video ActiveX Control parses image files.
An attacker can convince the user target to open a malicious web page to exploit
This vulnerability.-EXPLOIT the Injection SQL Oracle database Workspace Manager
Multiple SQL injection vulnerabilities exist in Oracle database server product.
The vulnerabilities are due to inadequate sanitation of input parameters
in the Oracle Workspace Manager component. A remote attacker with user valid
credentials can exploit these vulnerabilities to inject and execute SQL code
with lift is SYS or privilegesof WMSYS.Supported P2P application named uTorrent up to version 1.7.2.
Content signature for 1.41
========================================================================
Added new signature:
1053635 video MS stack buffer overflow EXPLOIT control ActiveX-1
1053636 video MS stack buffer overflow EXPLOIT control ActiveX-2
1053632 EXPLOIT Oracle database Workspace Manager SQL Injection-1
1053633 EXPLOIT Oracle database Workspace Manager-2 SQL Injection
1053634 EXPLOIT Oracle database Workspace Manager SQL Injection-3Updated the signature:
1051783 P2P Gnutella Connect
1051212-P2P Gnutella Get file
1051785 P2P Gnutella UDP PING 2
1051997 P2P Gnutella Bearshare with UDP file transfer
1052039 P2P Gnutella OK
Get Foxy P2P file 1052637Signature removed:
1050521 Worm.Klez.E1 - 1
1050522 Worm.Klez.E1 - 2
1050523 Worm.Klez.E1 - 3
1050524 Worm.Klez.E2 - 1
1050525 Worm.Klez.E2 - 2
1050526 ¡v Worm.Klez.E2 3
1050536 Worm.Blaster.B - 1
1050537 Worm.Blaster.B - 2
1050538 Worm.Blaster.B - 3
1050539 Worm.Blaster.C - 1
1050540 Worm.Blaster.C - 2
1050541 Worm.Blaster.C - 3Number of rules in each category:
========================================================================
Back/DDoS 51
Buffer overflow: 241
Access control: 92
Scan: 41
Trojan horse: 62
Misc: 3
P2P: 40
Instant Messaging: 121
VRU/worm: 410
Web attacks: 37Version: 1.40 rules Total: 1091
In this signature, we talked about the exploits/vulnerabilities and applications
as below:1053406 FEAT MS IE HTML Embed Tag Stack Buffer Overflow (CVE-2008-4261)
An error of border during the processing of a too long file name extension specified
inside a "EMBED" tag can be exploited to cause a stack-based buffer overflow.1053421 USE MS IE XML Handling Remote Code Execution (CVE-2008-4844)
The vulnerability is due to a use-after-free error when composed
HTML elements are related to the same data source. This can be exploited to
dereference of a pointer released by a specially designed HTML document memoryVersion 1.38
In this signature, we addressed the following exploits/vulnerabilities and
applications:1. support for P2P, BitTorrent and eMule applications.
Version 1.33
In this signature, we addressed the following exploits/vulnerabilities and
applications:1. support application IM named AIM (http://dashboard.aim.com/aim) until
version 6.5.2. support application IM called MSN (http://get.live.com/messenger) until
version 8.1.3 PcShare is a Trojan tool that can remotely administer an attacked computer.
4-CVE-2007-3039: the vulnerability is due to an error of limit in the
Microsoft Message Queuing (MSMQ) service during the treatment of MSMQ messages.
This can be exploited to cause a buffer overflow by sending specially
packages designed for the MSMQ service.Version 1.32
In this signature, we addressed the following peer-to-peer applications:
1. named IM application PURPOSE up to version 6.5 support.
2. press the request of IM named MSN until version 8.1.Version 1.31
In this signature, we addressed the following peer-to-peer applications:
1 P2P application called BitTorrent up to version 5.0.8 support.
2. support the P2P application named uTorrent up to version 1.7.2.
Version 1.30
In this version, we have addressed the following vulnerabilities in Microsoft
applications:1 SUBMISSION-24462: dereference of a pointer Null vulnerability exists in some versions
Microsoft Office. Remote attackers can trick users into visiting a
specially designed web page. The symptom includes a denial of
condition of service for the process in question.2 Microsoft Security Bulletin MS07-027: Microsoft Windows support
Services NMSA Session Description object ActiveX control does not reach
restrict access to dangerous methods. This vulnerability could allow
a remote attacker to execute arbitrary code on an affected system.Version 1.29
In this version, we have addressed the following exploits/vulnerabilities and
peer-to-peer applications:1 Microsoft Security Advisory (935423): there is one based on the stack
in Microsoft Windows buffer overflow. The vulnerability is due
for insufficient format validation when handling incorrect ANI
file cursor or icon. A remote attacker can exploit this
vulnerability of prompting grace target user to visit a malicious
Web site by using Internet Explorer. A successful operation would be
allow the execution of arbitrary code with the privileges of the
currently logged in.2. support a named QQ instant messaging application blocking until the
2007 Beta1 and Beta2 version.Version 1.28
In this signature, we address the following exploits/vulnerabilities:
Microsoft Security Bulletin MS07-014: there is a buffer overflow
vulnerability in Microsoft Word. The vulnerability is created due to
a flaw in the Table entry of the Section within the structure of Table data flow.
An attacker could exploit this vulnerability by tricking a user to open
a designed Word file. Exploitation of the vulnerability may result
injection and execution of arbitrary code in the security context
the user target.Microsoft Security Bulletin MS07-016: there is an alteration of the memory
vulnerability in Microsoft Internet Explorer. The flaw is due to a bad
posting lines of response in the responses from the FTP server. By persuading a user
to visit a malicious website, an attacker could run arbitrary on code
the target system with the privileges of the currently logged in user.Version 1.26
In this signature, we addressed the following exploits/vulnerabilities:
CVE-2006-5559: there is a memory corruption vulnerability in
the ADODB. Connection ActiveX control in Microsoft Internet Explorer.
The flaw is due to improper validation of the data provided to the
Execute method. By persuading target the user to visit a malicious
Web site, an attacker can cause the application process
to terminate or possibly divert its flow of execution to arbitrary
code.Version 1.25
In this signature, we addressed the following exploits/vulnerabilities:
Microsoft MS06-070 security bulletin: MS Windows 2000 Workstation
Service (WKSSVC. (DLL) has a remote code execution vulnerability. One
unauthenticated attacker could exploit this vulnerability to run
arbitrary code with the privileges of the level system on Windows 2000 and
Windows XP computers.Version 1.24
In this signature, we addressed the following exploits/vulnerabilities:
1 Microsoft Data Access Components (MDAC) has a remote code execution
vulnerability in the RDS object. DataSpace ActiveX control. A remote attacker
could create a specially designed and host the malicious file on a
Web site or send it to the victim through e-mail. When the file is opened,
the attacker can run arbitrary code on the victim's system.2. control WMI Object Broker ActiveX (WmiScriptUtils.dll) in Microsoft
Visual Studio 2005 has a vulnerability that could allow a remote
attacker to execute arbitrary code.3 Microsoft Internet Explorer has a type of heap buffer overflow vulnerability.
A remote attacker could create a malicious web page containing COM objects
Daxctle.OCX HTML when instantiated as an ActiveX control and the thing the
victim to open the web page. By this attack, the attacker to execute
arbitrary code on the victim's browser.Version 1.23
In this version, we have addressed the following exploits/vulnerabilities:
The vulnerability lies in some of the engines in Microsoft XML core
Windows. It is the result of the failure of the engine to properly manage the
bad arguments passed to one of the methods associated with the XML
purpose of the request.Version 1.22
In this version, we discussed the exploits/vulnerabilities as follows:
Vagaa is a P2P that supports the network BitTorrent and eDonkey software.
It can be downloaded from the two network. The software is mainly used in people's Republic of CHINA.
There are some problems with this software because it didn't follow the official eMule Protocol.
The question can be referenced on the wiki (http://en.wikipedia.org/wiki/Vagaa).
Classify us Vagaa as eDonkey2000 program and allow admin users to disable in the user Web interface.Version: 1.21
In this version, we have addressed vulnerabilities exploits as below:
Microsoft Internet Explorer WebViewFolderIcon has a buffer overflow
Vulnerability. A remote attacker could create a malicious Web page and
trick the victim to open. By this attack, the attacker could cause buffer
Overflow and crash the browser of the victim.Version: 1.20
In this version, we discussed the exploits/vulnerabilities and applications
as below:1 foxy is a P2P application that can search and download music and movies.
Foxy follows most public Gnutella P2P protocol but still has its own
signature under certain conditions. After the inclusion of the file Get Foxy P2P
rule, we can perfectly detect and block the Foxy and it will be detected as Gnutella.
Foxy can be blocked by deactivating Gnutella.2 Microsoft Internet Explorer 6.0 and 6.0SP1 have impaired memory
vulnerability in the ActiveX component. A remote attacker can create a
malicious Web page and trick the victim to open the web page. By this attack.
the attacker could cause the crash of the browser of the victim or to execute arbitrary code.3 Microsoft Internet Explorer has heap buffer overflow vulnerabilities
Vector Markup Language (VML). A remote attacker can create a malicious Web site
page and the thing the victim to open the web page. By this attack, the attacker
could cause the buffer overflow and execute arbitrary code on the victim's browser.Version: 1.19
In this version, we have added a rule to meet cross-domain redirect
Microsoft Internet Explorer vulnerability (MS06-042). The vulnerability
is caused by the inappropriate use of URL redirection by the object.documentElement.outer
HTML property. A remote attacker could create a malicious web page and
trick the victim to open the web page. With this attack, the attacker could
run arbitrary code on the victim's browser and get sensitive information.Version: 1.18
In this version, we have added the 6 rules to facilitate the blocking of QQ, the most
popular instant Messenger in China. There are several versions of QQ on the
official download site. Currently, we can detect and block QQ until the
Version 2006 Sp3 beta 2.Version: 1.17
In this version, we discussed the exploits/vulnerabilities below:
1. the Server Service in Microsoft Windows 2000 SP4, XP SP1 and SP2, server
2003 and SP1 have a buffer overflow vulnerability. A remote attacker
could exploit a server response designed to cause the buffer overflow and run
arbitrary code on the victim's system.2 hyperlink Object Library in Microsoft Windows 2000 SP4, XP SP1 and SP2,
Server 2003 and SP1 have a code execution vulnerability. A remote control
attacker could send a malicious Office document containing a
specially designed hyperlink to a victim in an email or host the file on
a web site. When the operator successfully this vulnerability, a remote control
attacker to execute arbitrary code with the privileges of the victim.3 Microsoft Word XP and Word 2003 have a remote code execution vulnerability.
A remote attacker could host a DOC file on a Web site. If successfully
exploiting this vulnerability, remote attacker could execute arbitrary code
with the privilege of the victim.Version: 1.16
In this version, we discussed the exploits/vulnerabilities below:
1 Microsoft Excel 2000, XP and 2003 Excel have a remote code execution
vulnerability, due to an error in Excel when incorrect URL handling
channels. A remote attacker could send a malicious .xls file of a victim
in an email or host the file on a web site. When the operator successfully this
vulnerability, a remote attacker to execute arbitrary code with the victim
privileges.2 hyperlink Object Library in Microsoft Windows 2000 SP4, XP SP1 and SP2,
Server 2003 and SP1 have a code execution vulnerability. A remote control
attacker could send a malicious Office document containing a
specially designed hyperlink to a victim in an email or host the file on
a web site. When the operator successfully this vulnerability, a remote control
attacker to execute arbitrary code with the privileges of the victim.3 Microsoft Windows XP/NT/2000/2003 have a denial of service vulnerability.
A remote attacker can send a malicious SMB packet causes the victim computers
Crash. -
External network access to blocked port 80
I have blocked port 80 (inbound - firewall) on my Windows 2008 R2 server. I want a few users access to port 80 of the external network. How can I do? External network will have a static public ip address.
Thank you for your time in advance.Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Slow download speed of RVS 4000
I use a Cisco RVS 4000 to test a new internet connection of 10 M / 10 M. I'm having a little problem, the test of speed of PSI (speedtest.cavtel.net). Download test always gives me 10Mbit/s, maximum for the connection speed, but the download speed is usually about 5.5 Mbps. My ISP has been on site and checked the lines and tested directly, and we determined that if connected directly we can test to complete download speeds, but when the RVS is connected, we can get full speed.
We tried different cables, reset to factory settings, update firmware, change the port settings and toggling the majority of the other setting on the router. Some settings have a minor effect on the speed of download, but nothing that gets me back up to 10 Mbps.
I noticed that there seems to be no way to set parameters of speed and trading on the WAN port. Perhaps miss me him, because this seems like a possible culprit.
Otherwise, the only one I can think of is a guarantee of return to determine if the device is defective.
Any ideas would be appreciated.
Hello.
These products are processed by the Cisco Small Business Support Community.
* If my post answered your question, please mark it as "acceptable Solution".
* Do not forget to give a 'congratulations '. Thank you!
-
I had trouble not getting no connection with WiFi, after weeks of allsorts following advice on forums etc, I found that the Wireless Pan DHCP Server does not start with error: Static Interfaces/Listening Ports is not available. my understanding is that the ports UDP 67/68, but when I run a Netstat I don't see them in the list. I checked windows firewall and they seem to be set to DHCP.
Any ideas would be useful.
Win 7 Home Premium 64 - Bit SP1
Please post your request here:
-
3 RVS 4000 with VPN connection
Hello
I want to connect in a triangle 3 RVS 4000 router with VPN
I configured 3 routers, which can connect to the Internet. Each of them are configured as the gateway.
I created 2 tunnels on each router. But the vpn connection cannot be established.
Here is the configuration of ROUTER1 another are configured in the same way, only the remote group configuration is different
What I also open some ports for VPN, if yes which and were
Thanks fpr your help and your response
HP. Meyer
Hi hanspetermeyer,
Thank you for posting. You don't need to open all the ports for VPN. I noticed that your screenshot shows two routers have a common LAN subnet of 192.168.100.x. You will need a different local subnet for each router:
- 1 router: 192.168.1.1
- Router 2: 192.168.2.1
- Router 3: 192.168.3.1
I think that you will find the tunnels only connect once you change the LAN IP of the routers so that they are on different subnets. Please let us know if it works.
-
Blocking ports using a virtual Super Hub 2ac (VMDG490) machine
Hi all
My first post and hoping that it is in the right place. A few days ago, I received my upgrade to a SHub1 to SHub2ac. After a speed problem. I created 4 blocking rules port for one of my computers successfully, but when I try to create the same blocks for my other computer I get an error of "the port selected range overlaps with an existing rule".
I gave the rule a new name and have obviously used the ip addresses of the other boxes on the network. It worked well on my old SH1 then why not on an alleged update?
VM, I called and they had no idea if it was possible and showed me tech, alas, they had no idea that is then reported to me their salary for support Dept. They said it couldn't be done? As a Department tech VM and the pay per help guys were unable to offer advice, other than to block ports through your firewall software. Can be done using Bitdefender, I can see (it's another can of worms in itself).
Any help or advice of Netgear technicians or other users of the popular home network. As seems a downgrade of the former 1 SuperHub that would allow any amount of blocks of port by using port numbers providing the name of the rule was different and the IP addy has been changed, is there a possibility of a upgrde of firmware to re - enable this option? Or the guys from VM need to RTFM
Any help is much appreciated in this matter.
Best regards.
Fubar
sent you a PM response
-
How can I make sure that any firewalls (versions of software or hardware) does not block port 443 to access?
Hi Anna_753,
Usually, you would receive messages from any program if it is impossible to access the port.
If you want to check if the port is accessible, then you will need to check the firewall settings.
Each firewall has its own parameters for ports of the computer.
-
Internet service provider blocks Port 80 # &; 1024
How to choose which ports to open are? Randomly? I think I'm good with the configuration of the part, but don't know which to choose... dm
Solved! Finally went back to work and connected then and there it was... I guess than TZO too k care the blocking port "80". I wonder why you need to open two ports? One is a back-up? Or, you need and and one out?
Maybe you are looking for
-
Easy Scan: Scan easy 1.6.0: indexable PDF, large file
Since the update for Easy Scan 1.6.0 searchable PDF it exits are much more important. With the previous version was the size of a page about 500ko, but now it's more like 1 MB per page. While the downgrade to the previous version is not possible, I w
-
Have a support of Win 7 Home Basic 32 bit, not able to upgrade to 64 - bit
I picked up a basic family Win7 (32 bit DVD) somewhere in 2012, am looking for upgrade to a 64-bit (got a brand new platform). The problem is, a 64-bit upgrade does not support media, and my dealer doesn't have a copy of Win7 for me to Exchange (the
-
Music files will not appear on Media Player
I downloaded a few songs that are bonus, either to a store or Japanese bonus tracks exclusive track. I put all the information and initially, they were to be seen with the rest of the album. But for some reason, they show now. If I click on it in
-
How to remove or uninstall a program in windows 8
How to remove or uninstall a program in windows 8
-
wireless keyboard stopped working without warning.
Original title: wireless keyboard stopped working without warning. I use my keyboard to touch screen which is very uncomrfortabe for me. Any ideas? Windows 8Computer and the keyboard is less than one year