MIB or possible SNMP OID on a LaserJet 4350

Similar Questions

• Need help with EEM applet 'info type snmp oid' and 'Add' the syntax of commands

  I am trying sample and adding a number of OIDs in the mib/ISDN on 2431 & 2921 boxes.  The number of T1s on the boxes can vary with the model and configuration of the box. I studied the OID I want to loop through and am sure those to whom I need to try, but I can't build the digital oid using the command 'Add' and get the SNMP get command use the result.  Here is my test cmdlet:

  config t

  No test event manager applet

  applet Test Event manager

  event no

  Info action 200 type snmp oid 1.3.6.1.2.1.10.20.1.3.1.0 get-exact type! isdnSignalingGetIndex

  game action 202 j "$_info_snmp_value".

  game action 203 I '1 '.

  game action 204 k '2 '.

  206 action value calls '0 '.

  action 210 all $i lt $j! Browse the ISDN interfaces

  action 215 all 4 $k! Browse calls in & stats connectes.2 &.4

  game action 220 myoides "1.3.6.1.2.1.10.20.1.3.3.1."

  action 222 Add $myoid ' $k$ I ".

  Info action 223 type snmp oid get exact $myoid

  action 224 puts "" myoides = $myoid, i = $i, j $j, k = $k, value = snmp oid = $_info_snmp_value ".

  action 225 regexp ' [0-9] + "" $_info_snmp_value ".

  the 226 if action $_regexp_result eq 1

  227 Add $Calls action $_info_snmp_value

  game action 228 $Calls "$_result '.

  229 action puts 'calls is $Calls. "

  230 action ended

  action 232 increment k 2

  end of the 234 action

  action 240 increment i

  250 action ended

  end

  clear all system event handler

  test run the event handler

  Here is the result when I run the cmdlet:

  bctrunks-2431-2 #event man run test

  myoides = 1.3.6.1.2.1.10.20.1.3.3.1, i = 1, j = 2, k = 2, 2 = snmp oid value

  Calls = 0

  myoides = 1.3.6.1.2.1.10.20.1.3.3.1, i = 1, j = 2, k = 4, 2 = snmp oid value

  Calls = 0

  Here's a snmpwalk on Solaris 10 of the poll server the OID I am trying sample and add

  -bash-3, $00 snmpwalk-v1 - c TWC-default 10.40.209.2 1.3.6.1.2.1.10.20.1.3.1.0

  SNMPv2 - SMI:transmission.20.1.3.1.0 = INTEGER: 2<---- this="" is="" isdnsignallinggetindex="" which="" is="" 1="" +="" last="" isdn="" port="">

  -bash-3, $00 snmpwalk-v1 - c TWC-default 10.40.209.2 1.3.6.1.2.1.10.20.1.3.3.1

  SNMPv2-SMI::transmission.20.1.3.3.1.1.1 = Counter32 : 10

  SNMPv2-SMI::transmission.20.1.3.3.1.2.1 = Counter32 : 10<----- this="" is="" the="" number="" of="" isdn="" outbound="" calls="">

  SNMPv2-SMI::transmission.20.1.3.3.1.3.1 = Counter32 : 2

  SNMPv2-SMI::transmission.20.1.3.3.1.4.1 = Counter32 : 2<------ this="" is="" the="" number="" of="" isdn="" inbound="" calls="">

  SNMPv2-SMI::transmission.20.1.3.3.1.5.1 = Counter32 : 0

  -bash-3, $ 00

  In this case, the cmdlet must obtain the OID 1.3.6.1.2.1.10.20.1.3.3.1.2.1 & 1.3.6.1.2.1.10.20.1.3.3.1.4.1 values and add them.

  The comand 'append' does not seem to be working properly, as indicated by the value of myoides.  The IOS command result search tool for the "add action".

  order does not explicitly say where the result of append it is placed, so I guess that the result is placed in the variable 'myoides' in my test applet.

  I have successfully used the 'action info exact snmp oid get-type type' syntax in the past, but I do not know if it works using a constructed string variable.

  Let me know if you can help me.  Thanks in advance.

  Add use the variable name not its value.  Try this instead:

  action 222 Add myoides ' k $I ".

• List of SNMP OID of the PowerConnect switches

  Hello

  I was wondering if anyone could can give advice on this survey, like all my research and investigations have not until this product no result.

  I conclude on a significant deployment for a customer who has a mixture of 80xx PowerConnect 62xx, 55xx and M8024K blade, M6348 switches. All switches are deployed and operational, and we are now trying to set the SCOM server to use SNMP to retrieve events etc. of the switches.

  the problem is that I couldn't find SNMP OID anywhere to concerned, switches that are required. the events that we want to keep an eye on relate to connect the downs, lag switch, battery, authentication and critical failures for the models.

  There is no requirement for the consumption of its use, of temperature, fan or CPU power or memory, so they are not needed.

  Are there SCOM management packs that might help out here?

  Any advice or pointers will be greatly appreciated.

  Cheers.

  Richter,

  Looks like you just need to install traps to send alerts to your SCOM server.  Normally, to see the things that you listed as changes to links, lag, batteries, authentication failures and other critical changes of your switches, it is not necessary ask an OID.  All the these can be controlled automatically traps.  The processor, memory, temp, fan and power you listed are in a different category, because they are all sensors in the switch that can send a trap when a threshold is reached, but can also be queried for exact measurements.  Traps are easier to use than to the vote an OID and let you keep an eye on the areas that you mentioned.  To install traps, set your community on your switches string and the management server, enable all traps and configure your management as your recipient of the host server.  The commands are:

  (config) #snmp - known private community server

  (config) #snmp - server enable traps all

  (config) #snmp - private host 10.10.10.5 Server

  I hope it's useful for you.

  B

• Snmp OID 4 R510 don ' t answer

  Hello

  I have a problem for a few weeks.  I had 4 R510.  Before, I configure snmp on them to send information to a software for snmp monitoring information.

  So now, don't answer 4 OID on a single server.   2 x power supply status of power and the General temperature (temperature and status).  Others respond like systemname, lan, raid, State of the processor status.

  When I stop the service on this server, all snmp oid stop responding.  I did the same test on another and it s the same.  But when I run this service.  Do not answer these OID 4.  But on the other, Yes.

  Any idea?

  Thank you very much

  Max

  It is resolved.  I reinstall.  There was something missing in open manage.

  I can close this thread.

  Thank you

  Max

• Get a "Cannot find driver" error when connecting to my HP Laserjet 4350 PCL5 for workgroup computer.

  * Original title: problem with HP Laserjet 4350 PCL5

  I have a shared network printer. But when connect us to another computer in the workgroup. It says that it cannot find the driver. Computer has Windows 7 64 bit. I tried my drivers and .inf files, but nothing works.

  Hello

  This problem may occur if the printer drivers are not installed properly.

  I suggest you run the HP print and Scan from following link doctor and see if that fixes the problem.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc

  You can try to install the last printing software, drivers from the following link and check if it helps.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=412171&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4063%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  For more information, see the links.

  Problem for HP LaserJet 4350 printers

  Share a printer

  Install a printer on a home network

  Keep us informed on the status of the issue.

• HP Laserjet 4350n: HP Laserjet 4350 with 10 64-Bit Windows

  Hi, I can not install drivers for HP Laserjet 4350 on Windows 10. It detects the printer, and I see the DOT4 driver in Device Manager, but in my printer it list indicates that a device need driver installed. When I try to add a printer, it does not see the USB connect. Anyone know this issue before?

  Thanks for the reply. I think it is the connection of the printer issue. I was able to connect a HP Laserjet 4200 and a HP Laserjet 4050, childless.

• Index of physical memory SNMP oid has changed after system reboot

  I asked for a hot - difficulty for windows 2003 server. Server must be restarted after you apply the hotfix to hot. After the reboot, I noticed this index of oid snmp for physical RAM increased from 17 to 16. is this normal behavior for snmp to change the Index oid?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Download SNMP MIB for Laserjet 5550 and 1505n. Paper, stuffing, etc.

  Please help me. I need the MIB files for SNMP messages as paper, jam, etc. Printers are LaserJet 5550 and 1505n. Rules of HP.

  Thank you very much for the help. I discovered a different way, but it's here:

  On the right side you can see the address and in the Middle, the data type and name. They are all in position 0.

  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperJam, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.9
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperOut, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.8
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PeripheralError, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.6
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_ConnectionTerminationAck, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.5
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_NewMode, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.4
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_InterventionState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.3
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_AtBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.24
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_TcpBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.23
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_LlcBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.22
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_NovBusy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.21
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Reserved, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.20
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.2
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PaperOutput, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.19
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Printing, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.18
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_DoorOpen, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.17
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Initialize, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.16
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Wait, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.15
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_Busy, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.14
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_IoActive, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.13
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_MemoryOut, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.12
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_PagePunt, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.11
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_TonerLow, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.10
  syDeviceValueDefinitionWithVariableAddress, 0, SnmpIntegerSPS, HP_LineState, SnmpIntegerSPS2ScadaInteger, Y, N, N, DIN, 0, 0, 0, 1.3.6.1.4.1.11.2.3.9.1.1.2.1

  I hope it is useful for someone too.

  Best regards to all users of the forum!

  Cristian

• SG - 500 - OID SNMP to lower the CPU load?

  Hello

  I have several SG500 (autonomous and stacked). How can I get the CPU via SNMP load? Who knows the correct SNMP OID to lower the CPU load?

  In the MIB that are provided for download one was not able to find the correct OID.

  Hello

  There are three OID for the CPU usage:

  CPU utilization for 5 seconds	. 1.3.6.1.4.1.9.6.1.101.1.7.0
  CPU utilization for 1 minutes	. 1.3.6.1.4.1.9.6.1.101.1.8.0
  CPU utilization for 5 minutes	. 1.3.6.1.4.1.9.6.1.101.1.9.0

  This came a note of junk, I got in an email, so I don't know exactly where this information is originally.

  Let me know if it works for you,

  Christopher Ebert - Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Using SNMP to number of requests by fax

  I wish I could use SNMP to query and track the number of pages of the fax on my CM4540 printers.

  Can someone tell me if this is possible and if so, what MIB and OID would be used.

  Thank you

  Brian

  This morning, I got my response from HP.  Here's what I learned.

  For access to archive printer MIB:

  1. go to http://h20147.www2.hp.com/sppmain/

  2. click on the link Public of Software Development Kits (SDK)

  3. Select Laserjet and Digital Sender of the Kit Area drop-down box

  4. navigate to LaserJet and Digital Sender > management of printers > printer specific MIB

  5. sort the list of Legacy printers, then select the appropriate model

  6. wait for the browser to refresh, and then click the download button

  7. save the file on your machine and review

  I tried saving and opening a without extension, seems that it is just a text file.  It looks like some are .zip.  Some are registered as .mib trying to open it in a CMD window on my machine.  None of the files I was looking at was a text for SNMP OID objects.  Perhaps you need to translate the information into an OID somehow.

  Take a look and let me know if you can make progress more or not.  Its been fun to discover all that we have learned so far.

• SNMP requests returns the number "36" PERC H700 battery. What it means?

  SNMP OID

  Text: iso.org.dod.internet.private.enterprises.dell.storage.software.storageManagement.physicalDevices.batteryTable.batteryEntry.batteryState.1

  In the numeric form: 1.3.6.1.4.1.674.10893.1.20.130.15.1.4.1

  Possible States:

   0: Unknown  1: OK  2: Failed  7: Reconditioning  9: High  10: Low  12: Charging  21: Missing
  

  But from time to time we receive value "36".Oops, but number 36 is not exist in Dell oficial mib-files.
  
  Can anybody explain me what is it?What does that mean?
  
  Thanks.
  

  Crazy,

  The reason that I was leaning towards the cycle of the battery, it is that although there is a loading error code, there is an alert information sent to the BONES and OMSA to the start of the Cycle to learn. This is not an error, but is an alert.

• Help to SNMP JIT

  Hello community of Cisco

  Can someone please provide some guidance on how to create an EEM Applet to monitor an SNMP OID? In particular, I would like to know how to monitor State ospf neighbor.

  The high level of ospfNbrState est.1.3.6.1.2.1.14.10.1.6 mib. However, the OID is not enough.

  For example

  Event Manager applet snmptest

  snmp oid 1.3.6.1.2.1.14.10.1.6 events poll_interval 2 get_type accurate entry_type value entry_op ge entry_val 1 exit_comb or exit_time 300 maxrun 20

  syslog «snmp test» action message

  The action above will not be generated when there is a change of State of ospf.

  Can someone please provide some guidance?

  See you soon

  Carlton

  Oh, so that's a dynamic neighbor.  In this case, you might be better matching on syslog compared to polling messages.

• PX2 - 300 d - where can I get the MIB for a LeNovoEMC PX2 - 300 d?

  Hello

  I would get the MIB for this product.

  Where can I get?

  Thank you.

  Bird,

  Just found this:

  If a client requests a mib file for SNMP implementation, this is the link to click:

  http:///manage/mibs/lenovoemcmib.txt

• environment of server terminal server HP laserjet p1606dn

  Is it possible to use a hp laserjet p1606dn in environment terminal server?

  Page 10 of the Manual does not say explicitly that it supports environments Server terminal server (the note was the only reference I could find for server environments terminal server).  This leads me to believe that it is not guaranteed to work without causing performance or errors occur.

  However, you could try posting in the business community.  Consumer forums is more for use domestic and I suspect most home users need to print in an environment terminal server.  They may be able to answer the question more easily or be able to recommend a printer that works in an environment terminal server.

• LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

  I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

  The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

  Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

  Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

  I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

  I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

  Your help would be much appreciated.  Thanks in advance!

  Setting margins generally depends on demand - but (you say) that your application does not allow this.

  Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

  For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

  

  Note:

  • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
  • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

  With regard to the '... sending the commands to the printer before printing... PCL6«» :

  • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
  • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.