Microphone and Volume

Hi all

I just bought a dell Inspiron 1525 with windows Vista Home Basic, the mic line is very good, I can record the sound and can regarderit save it properly but I am not able to see the settings of mic as a level of inhibition, unmuting, and I'm not able to see the volume of work as bass levels , treble etc etc. as well except the volume control, when I click the speaker icon in the system tray I see only one level to adjust volume and nothing else as in other windows, there are many levels including mic.

can someone help me on this please.


Tags: Dell Laptop

Similar Questions

  • Satellite C650-197 built into the Microphone and Jacks does not

    As the title, I tried to use the microphone that comes built-in on this model (Web camera VGA integrated with built-in microphone) and found his does not work. I tried to plug in an external microphone via the microphone jack and still no registration.
    I can't seem to find the drivers for the integrated or plug anywhere.

    Any ideas?

    Hello

    > I can't can't find the drivers for the integrated or plug anywhere.
    This drivers don t exist. The sound card driver controls everything.
    I think you should first start the webcam software and should test the microphone because the internal MIC is part of the webcam.
    Webcam software provides a tab; settings and properties. In one of these tabs, you will find settings for the audio.
    Here, you can increase the volume of the microphone and was able to record a small audio session.

    In addition I recommend the settings in Control Panel-> sound.
    Make sure the microphone volume is set to maximum. Don't forget to check the hidden devices and disabled it there...

  • How to ensure that my computer has microphones and then use them for talking to Cortana?

    How to ensure that my computer has microphones and then use them for talking to Cortana?

    Hi Walter,

    Please start by http://windows.microsoft.com/en-us/windows-10/cortana-privacy-faq

    Also, try to review this tutorial: http://www.tenforums.com/tutorials/4026-cortana-turn-off-windows-10-a.html

    They should help you get started.  Problems specific to the micro (existence, activation, volume,...) will be addressed (more than the troubleshooting steps if Cortana doesn't) that you go through the above; However, a "one-stop-shop" for microphones & recognition recording & speech covering all peripheral aspects are versatile control panel page (see the path in the blue header at the top of the screenshot pictured below for W10Pro 11102).

    Best wishes

    Kosh

  • Whistle with ECM - W1M Bluetooth microphone and a3000 camera

    Web site of Sony said that the a3000 and ECM - W1M are completely, 100% compatible. I bought the microphone and the receiver lights up on the camera.

    I try a lot of things until I decided to try to record with the receiver on the camera, blue light comes on and the microphone and the receiver coupled with each other. I know that through these hoops does not mean that 100% compatibility. anyway.

    The problem is that the microphone has a very strong sound when not all the sounds. Example.You turn it on and it pairs. Before you start talking there is a strong sound. Once I have start talking the hiss disappears but comes back if I stop to talk to a down while.

    Question to Sony, are Multi Interface devices all different? Sony sells an all being the same and compatible. And I'll be back the MIC because the whistle is going to get better?

    Thank you.

    Seems to me that if you have an AGC (auto gain control) turned on. If you are not familiar with the MCO, it does is amplify the volume of the sound entering the camera until he hears it. In other words, it increases the gain of the sound. This is probably why when you talk about the hiss disappears, but he returned when there is only available for noise which is much more difficult for the camera to 'hear' compared to your voice or loud sound source as an instrument for example.

    I am not familir with the a3000, but you could look through your menus and see if you can turn off or maybe the audio manual value.

    Hope that helps.

  • Win 8 problem with my new microphone and audio!

    Hello guys! I recently bought a headset of game G230, very good hardware, but when I asked it on the knees, it did not work very well, I see my reading devices (I have attached a picture) sound not really from the gameset but speakers, when I switch off the speakers and keep only the helmet, no sound at all even you comes from the sound of the speakers, it says that I hear in fact from my helmet G230!

    It's one.

    Two; When I click my button mute in my keyboard, the sound is not cutting it anymore (started after I put the G230) and it continues to work on

    I tried to make device by default, it's okay! same problem

    Hello

    Please keep us informed of the issue and the information provided.

    You can also check for any error in the device for the audio, video controller driver and game Manager and write to us. Please follow the steps below to see.

    (a) press the Windows key + X Key on desktop.

    (b) select the Device Manager.

    (c) expand sound, video and game controller.

    (d) check if there is no error (! sign) or (?) Sign).

    Please follow the steps here to adjust the Microphone audio output by default.

    (a) right click on the volume symbol present on the bottom right.
    (b) select sounds, click the readtab.
    (c) in the list, click Microphone , and select the default value.
    (d) click on apply and OK.

    Run Audio troubleshooter.

    Please follow the steps below to run the troubleshooter of Audio playback.

    a. press Windows + W key on your desktop.
    b. write Troubleshooting in the search box in the upper right.
    c. Select Troubleshooting obtained after the search.
    d. Select all the option to display in the left panel.
    e. Select Audio playback option.
    f. click Next to perform the Audio Troubleshooting and follow the steps.

    Get back to us with the current state of your computer and we will be happy to help you.

    Kind regards.

  • HP 15-r014tu: brightness and volume icons do not appear on the screen

    need drivers for on the screen brightness and volume icons

    Hello

    Download and install the HP display on the following.

    http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52956.exe

    Kind regards

    DP - K

  • HP ENVY 17-R102NL: HP ENVY 17-R102NL Microphone and keyboard

    Hello and thanks for your help.

    I bought this laptop and I have another question 2:

    1 backlit keyboard: backlit keyboard seems that it is not even stated in the technical specifications

    microfone 2: microphone doesn't work. I had never tried the microphone.

    I tested it with Skype (10 windows operating system)

    I've updated the drivers.

    Nothing

    Could you please help my?

    Many thanks in advance again

    Hey, Marty. Thanks for posting. I suggest you follow the steps to resolve these two issues.

    Keyboard backlight: press the "fn" key and hold the ' SPACEBAR'. Press "F5" to activate the backlight power. Or simply press "fn" key and "F5" key to activate the backlight power.

    I also suggest you follow the "computers HP - problems (Windows, 10, 8) Microphone" and reply back.

  • Re: Looking for a laptop with backlight keyboard and volume dial?

    It's time to replace my Satellite Pro L100 to a new.

    I'm looking for a model (any model not only satellite) who have these 2 features: backlit keyboard and volume knob.

    I know A500 a backlit keyboard and a touch screen with the volume buttons, but I guess that these buttons work only when windows is started (I want the ability to control the volume "offline" before windows starts)

    Thank you.

    Hello!

    AFAIK the Qosmio has also keyboard backlight and volume wheel series. Did you check that?

    But like Garrett said the volume button works if Windows is started. On my Qosmio F50 I can only use if Windows is started, but normally I don t need this feature before Windows is not started.

    Good bye

  • Switching between microphone and line-in in the Realltek Sound Manager

    Ok.
    Now I know where the Realtek Sound Manager, and I can control the parameters of the microphone and speakers.
    But how can I switch between microphone and line-in?
    At the moment I don't see a line of component option snap at all. Is it because it's a kind of auto detect and the opportunity every time I connect something?
    Everyone knows this, or has some experience in this regard?
    Cordially in advance
    Frans

    Sorry but I don't understand what exactly you want.
    You have built in mic or you can use the external microphone connected to the mic-in port.
    When the external microphone is connected a resident will be disabled.

    The question is: what do you want exactly and for what purposes? Please explain what is the reason for this switching between mic and line-in port?

  • L830 satellite - built-in microphone and webcam not working

    Computer: Toshiba Satellite L830-10N
    Platform: Windows 7

    Hi guys,.
    I have problems with my integraed microphone and webcam. All of a sudden out of nowhere, it wouldn't work. I tried to restore the system to go to a previous point where I worked, I installed several anti-virus programs to clean up the computer just in case of virus and still nothing.

    The recorder has also been verified, but when I try to save, an error message appears and says "an audio recording device is not found."

    I also tried to go to control panel > sound > recording, but a message says that cannot recognize anything.

    Also, the system tells me that I have a problem with the WD SES pilot seriously, I don't know what it is but just in case it could be linked.

    He worked before without any problems and I did not download or some kind of action is suspected, but now it will not work.

    I checked the above in relation to the subject, but none of them does not work for me.

    Thank you very much.

    Webcam is listed in (imaging devices) Device Manager?

    If you are using Win7 64 bit try reinstalling the webcam driver.

  • My function keys and volume controls will no longer work. Help.

    I'm unable to use my function keys and my volume level is not displayed on the screen as before.  I think that maybe the software controlling the function keys and volume control screen is damaged or not loading.  HELP please.

    Hello

    Download and install HP Quick Launch Buttons on the link below.

    FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

    Once the installation is complete, restart the laptop.

    OSD volume is provided by HP MediaSmart SmartMenu, so if you still don't see display, try the method in the link below and use Recovery Manager to reinstall this app - NOTE: you need at least one other application MediaSmart must be already installed, IE HP MediaSmart DVD, before you reinstall the Menu Smart.

    http://support.HP.com/us-en/document/c01868333

    Kind regards

    DP - K

    

  • HP G6 2228SE: brightness and Volume bar display on screen dosent show up

    Hello

    the bar brightness and Volume that appear in the upper left corner of the screen by pressing the flight upward down or brightness upward down dosent key appear.

    I went on the software download page, but was unable to find a "HP quick launch" software for windows 7.

    Help, please.

    Hello:

    You need this software for the on screen display on...

    This package provides utility to display onscreen HP for the notebook models and operating systems. The display on the HP screen utility allows the graphical displays pop - up that appear on the screen when certain features, such as volume or brightness, are changed.

    File name: sp55152.exe

  • Not A Dell Inspiration built in microphone and if yes how can I cut It On

    I use to make videos on my computer, but now when I try to play videos of the sound is not output and the speakers work and on Skype the other person can't hear me

    Hello

    1. what operating system is installed on the computer?

    2. what exactly do you mean by "' built in microphone and if yes how I cut on '?"

    3. what application you're using to play the video?

    4. is the issue confined to sound on video?

    5. are you able to listen to the sound when you connect external speakers?

    6. are you having a problem with the sound on the application of Skype?

    Check out the link:

    Suggestions for a question on the help forums

    http://support.Microsoft.com/kb/555375

  • Computer recognizes the usb microphone and the head set with the sound prompt but not instructions to continue.

    Original title: usb speaker and seeded

    c.p. recognize the usb microphone and head studded promp sound but no instructions to continue. I am trying to add voices or narration to my editing of soundtrack.

    Hi Billylambert,

    1 Windows operating system you are using?

    2. What is the brand and model of headphones and microphone?

    3. what video editing software do you use?

    4. were you able to use the device before without any problem?

    5. have you made a recent software or hardware changes to the system?

    If you are using Windows 7, you can try to run the Audio recording utility and check if it helps.
    Open the troubleshooting of Audio recording

    For more information, see the article:

    Connect one microphone, music player or other audio device to your computer

  • microphone and stereo make a high pitched noise high

    HP support assistant unable to height the microphone and stereo is a high-pitched noise, I have a hp compaq laptop

    I had this problem and I don't really know what are the causes of the problem (with me anyway), I found this turn of the amp mic off cures the problem, just do a right click on your "speaker" icon, choose recording devices, double-click the microphone tab select levels and turn off the boost, I apologize if this has already been done!

Maybe you are looking for

  • Acquisition of IMAQdx - synchronization problems

    Hi all I built a code a VI in which I put in place a camera IMAQdx acquisition in a loop of producer-consumer (see attached VI). The code also controls the camera exposure time. I would like to record images at 10 frames per second, the camera is set

  • file rtl120bpl

    rttl120bpl has been removed by a virus when I had removed virus so now tells me that I have to re - install again. Where can I find the program of re - install again? Thank you. Sincerely of Loraine

  • Please tell me what I what I need...

    Hi all I just bought a HP Pavilion 500-002 a desktop computer and the seller assured me that I could run 3 monitors on it, but I soon discovered that I can't. I want 3 screens for Sim Racing (iracing, rfactor etc.). I just need to know what graphics

  • Button label counting

    Hello How can I have a Custom Button skin class which will allow me to have a dynamic text? for example, if I have just a normal button and add a label inside the skin, when I try to update the label string nothing happens. There is no this.layout fu

  • Can someone tell me please how to get my game going 2 installed and playing on Windows 7

    Y at - it a hotfix or an update so I can play again from the risques2 on Windows 7. It will install but will not play. He can play on my system. Thank you...