microphone problem when using Skype

When you use Skype I am able to listen to the other appellant, but they cannot hear me.  I have two speakers and one is Logitech quick cam when using Skype.

Please let me know what I need to do to solve the problem, thank you

Hello

Please try (very close to laptop):

https://support.Skype.com/en/FAQ/FA897/my-friend-can-t-hear-me-Windows-desktop

Kind regards.

Tags: Notebooks

Similar Questions

  • Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

    Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

    I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

  • Static in speakers when using Skype

    I have a PC laptop HP Envy Touchsmart IS-j052nr, running Windows 8.1.  When I use Skype, either through headphones or the speakers, I have problems from parasites.  It sounds clear when I speak and when the person at the other end is speaking, but if the person on the other end does not speak for several minutes, then the static method noise becomes stronger and stronger (like a huge storm of rain falling at the hearing) until the other person makes a new sound.  The other person can also hear static.

    Is there a new driver, I can download to fix this problem?  When I scanned my computer on the support site there is no audio driver I was missing.

    Thank you!

    Hello SCLC.

    Welcome to the Forums of HP Support! I understand when you use Skype on your HP Envy Touchsmart j052nr IS running Windows 8.1 you hear static, whether you use headphones or speakers. Now you don't hear static noises when using Skype, or when using headphones or require sound from speakers?

    After some research on the Skype Support Forums, I've seen a few recommendations that I would like you to try to see if that reduces / removes this annoying static noise. Please follow the steps listed below:

    1 sign in to Skype

    2. go in Tooks > Options > General > Audio settings

    3 uncheck automatically adjust to the title of chapters of Microphone and speakers

    4. adjust the volume to your liking

    5 save and restart Skype

    If you are still having static noise, I wish that you continue here: Skype Audio issues troubleshooting

    Please reply back with the information requested, if the static noises are still there and it is only when you are using Skype, I recommend to go to the Page of Support of Skype as they would be able to help you.

    I'll watch for your reply.

    Source: www.skype.com/en

    Thank you

  • Why can I never get a good picture on my imac when using Skype?

    Why can I never get a good picture on my imac when using Skype?

    I use the free Skype to talk to my friend in China every week. They always see me on their computer or phone clearly, but I can never get a good video of them, clues why? I see a good image of myself, but never of them. I can't adjust the settings of the built-in camera because they are fixed. Is this my router modem, which is 8 years old now. What is causing this problem. If you look on YouTube there are hundreds and thousands of good quality webcam videos then why am I having this eternal problem year after year? I've got El Capitan OSX

    If they can see you clearly, the problem is not on your side - at least not in your Mac. Could be the router or you internet connection. Otherwise: https://support.skype.com/en/skype/mac/

  • I have problem when downloading Skype installation.

    original title: problem downloading Skype

    Hello

    I have problem when downloading Skype installation. I tried to download it form Skype site and filehippo.com. I also tried downloading in different browsers such as chrome, firefox and internet explorer 9 (with and without using IDM). and also I tried it on different systems is to say my office as well as the laptop (both running windows 7) .i have tried on different internet connections, that is to say wifi and LAN as well.
    The problem is that, in case of downloading online (i.e. about 600 KB install size), it keeps downloading and ultimately we mean the link gives the complete download of installation and when I try to download the complete configuration (IE 24.5 MB) it continues to download well until it reaches 24.3/24.5 MB downloaded. After that it stops just to make progress. What can possibly be the problem.
                            
    Thank you.

    Skype download successfully if your Internet connection is stable.  How does this PC connects to the Internet:

    (1) to a router:
    (a) wireless (wifi)
    (b) wired Ethernet LAN

    (2) directly on the Internet:
    (i) wired cable modem or xDSL (telephone line)
    (II) mobile phone style - 3 / 4 G wireless connection

    You may need to try a different computer and it download full installer of Skype:

    http://community.Skype.com/T5/general-discussion/alternative-download-links/m-p/122344

    However, Skype still seems to need a fully functional Internet during the installation process.

  • Micro works not when using Skype. Problem is not with the microphone, but with Skype. Ive tried

    When you use Skype, my internal microphone does not work - friend says that he can not hear the voice, but he can hear other sounds - music on youtube for example. Ive tested the microphone on Skype Echo - it wasn't working at all. I tested it on a voice recorder - MIC was working properly. Also when I just started to use this laptop (3 days ago), I spoke with a friend through Skype for about 3 hours, and then he couldn't hear me suddenly annymore. If something is wrong with Skype. Computer consultant suggested me to contact Skype support technicians.

    In Skype, open Tools-> Options-> Audio settings. There is more than one option available in the selection box for Microphone?

  • Having a problem in Windows 7 when using Skype

    Hello world

    My name is Steven Lash, I lived in San Diego in the United States. I have been using Windows 7 for the past 6 years, all software and applications work properly except Skype, for these 2-3 weeks, I was faced with problem on my Skype. I don't understand what is the real problem. I did my best to solve this problem, as I've uninstalled Skype and update it to the latest version, but still the problem is the same. Now, I'm going to share exactly the problem I used, while I started my laptop Skype has successfully loaded whenever I was answering to anyone to contact on Skype, it displays the message do not answer and the circle is the continuous treatment and here I got the error on my Skype screen. http://prntscr.com/beleyg, please check any suggestions really appreciated.

    Steven Lash

    Hi Steven,

    Sorry for the inconvenience caused.

    If please go to http://support.microsoft.com/and click the Skype link. We have a dedicated team to help you with problems with Skype.

    I hope this helps.

  • computer stops when using Skype

    My laptop stops when you use Skype shortyly after the launch of video call, there is a new problem in the past, everything was fine.
    We have the laptop that runs daily every day could have questions related to heating.
    It seems there is no error message in the event viewer.
    When I turn on the computer it does not say she stop properly and it can run for hours, but as soon as you Skype even once turn off with warning message.

    Bravo Tim

    I ended up putting the nozzle of the vacuum on the computer while suction fan was off and sucked on a pile of dust that was clogging the fan, laptop is Purring like a kitten, heaters do not and do not turn off.

    Thank you for your guidance and quick response.

    Bravo Tim

  • I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

    When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
    I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
    This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
    It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

    I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
    Now everything works.
    Thank you
    B.

  • Satellite A660 - Webcam does not work when using Skype

    I recently bought a Satellite A660-15J. I am running Windows 7 64 bit.

    I have the latest version of Skype (5.3.0.111).

    The integrated Webcam does not work when you run Skype. If I run the Toshiba Web Camera Application the webcam works fine. However, when I test it in Skype, I get a message saying "cannot start video. Try quitting other programs that use the webcam '.

    However, as far as I can tell there no other programs available. I have tried Skype with the Web Camera Application clised & open. I also confirmed that I do run the latest version of the program.

    One of the main reasons we have this laptop is to use Skype video... Help, please.

    Disable webcam application start-up and exit this application before you start Skype.

    I used Skype many different models of laptops, including friends A660 and it worked correctly.

    When you open Skype video settings is listed as default camera USB webcam?

  • His problem when using AC adapter / CC on satellite

    Hello everyone, I have a sound problem when you use the AC adapter / CC in my laptop, it produced unpleasant noises. But it works very well when working with the battery.
    I had no problem before this month. I thought it was the problem with the bios and updated my BIOS as well. The problem is still not resolved. have you guys any experience about it.

    Looking to hear from you guys.

    Hello

    First, I would try to update the audio driver. Check out the Toshiba page and reinstall the driver. If it doesn't solve this problem, I guess that there must be something wrong on the motherboard. Unfortunately, it is not easy to say exactly what's wrong.
    Diagnostic tests are needed to find the fault.
    In this case, a call to the service in your country partner would be very good idea.

  • Problem when using bb-ant-tools to create a multi-module application

    I am trying to redesign an application prototype into something more adapted to our needs. The prototype was built with the first version of the Eclipse plugin, but I've converted successfully to the current version.

    I have same configuration Ant with bb-ant-tools for it and have successfully build the application and the executable running on the real device.

    But this prototype had code to put them all in a single module, even the source to a third party library with support for managing messages JSON ('J2ME JSON").

    We need to build several slightly different applications from the same code base (differing mainly in aspects of the customer specific look and wording etc.).

    So I want to divide the code into several distinct modules, each providing it is build own artifacts and have a top-level project for each variant you want to produce.

    So at the beginning I want to have these three modules:

    • J2ME-json - the third party lib
    • Code base - the largest part of the source code and default localization resources
    • my-app - the main class, icon resources (and in the future some property files and resources specific to the customer location)

    I have Ant generate files for each module, which compiles and signs packages resulting - seems ok so far, no problem when executing the task of sigtool. The build for 'j2me-json' file and 'code base' defines the product as a type = "library".

    The build for "my-app" file collects the artifacts to build (* .jar, * .cod, etc.) and copy them to a local directory "dependencies", where they will be extracted for the compilation of the actual application. After compiling and signing all are copied to a deployment directory.

    Deploy the application on the device via the 'Desktop Manager' but when I run it on the device I get the error message:

    Error at startup MyAppId: Module ' code$ 2dbase ' attempts to access a secure API.

    The strange thing is, that the "Tool of Signature" window shows demand of signature of all modules during the phase of signature of the request, not only for the request form itself as the error message suggests. And I even sign the modules separately because of this message - but it does not help...

    So, what's wrong here?

    Here is the definition of the actual target of the relevant elements:

                                                                                          
    
                        
    
                                                                                                                                
    

    The *.alx file that looks like this:

             My App Name      1.2.1.35               MyAppId.codj2me-json.codcode-base.cod         
    

    I'd appreciate any help with this problem! Thanks in advance...

    Horst Weber.

    Found!

    My mistake was that I thought that I can mix attribute and property file inclusion statements in the task of jdp bb-ant-tools. My actual task for libraries looked like this:

    
    

    Obviously, the author didn't want to handle the ambiguity when someone sets the same property as an attribute, and in the file. So you should use either one or the other: If you use properties files, then declare all your properties here.

    So this message "Module attempts to access an API secured." seems to be very misleading: it disappered after correction of the generation of files and I now have a common application.

  • A problem when using Flash files with a browser

    Hello

    I have this weird problem when it comes to the use of flash in dreamweaver, whenever I use a flash file & after I test it on Both Firefox & IE browser), I get this weird border whenever I click on it, and here's a photo shows u what I mean...Flash_Border.jpg

    If all goes well. I'll take a few answers:

    Thanks in advance.

    Try adding the following (in red) to the style of the web page and see if it helps...

  • Problem when using Ajax in the APEX.

    Hi all

    I use this function in my application to overcome the & & problem... This is the query

    DECLARE
    l_counter NUMBER;
    l_o_name VARCHAR2 (2000);
    BEGIN
    FOR rec IN (SELECT distinct FASS. ESCAPE_SC (atct_attr_type), FASS. B ESCAPE_SC (atct_attr_type)
    OF t_new
    WHERE atct_atcl_code =: F41_ATCL_ATT_TYPE_REP_CODE)

    LOOP
    -HTP.prn ("< option value ="' | rec.b |) '">' || Rec.a | ("< / option >");
    dbms_output.put_line (' < option value = "" | ") Rec.b | '">' || Rec.a | ("< / option >");
    end loop;
    END;

    It works very well with any questions...
    But I want to show atct_attr_type at the top of case...
    The use of uppercase letters in the above query...

    Thank you
    David...

    What is the problem with using the UPPER function

    HTF. ESCAPE_SC (UPPER (atct_attr_type))

    in the Query(for loop inline cursor) SQL

  • voice bouncy when using Skype

    My voice is bouncy and missed on the receiver side, when we are on Skype. I speak directly to the laptop, no microphone.

    Hello

    -What operating system is installed on your computer?

    I recommend you to check if the mix parameters for the applications you use are activated.

    a. launch the Skype video chat.
    b. click on the volume icon in the taskbar.
    c. click mixer.
    d. under Applications, select that is to reactivate the sound for all running applications.
    e. check if the problem persists.

    If the problem persists, post your question on Skype: http://forum.skype.com/index.php?showforum=5

Maybe you are looking for

  • How can I remove a program locked from my mac

    How can I remove a program locked from my mac

  • Crash on iPad

    My ipad freezes. I have reset a few times (the latter being reset to factory settings). no problem with the battery life. Can it get fixed and if so, how much and why it crashes?

  • Buttons

    Hello users Diadem I'm a new user for Diadem, I created my own function analysis and calculation and made an interface to it with a dialog box, I want to create a new button in the interface of tiara, when it is selected, the user dialog box to appea

  • Shutdown of PC?

    Hi the last few weeks every time I play COD or poker on facebook or even to try to burn something my pc just shuts down on its on I get no error message or anything, it does at each time, but about 80% of the time, this problem occurs if anyone could

  • Copy a hard drive

    How to copy all content from a desktop to a laptop computer?