MicroSD does not work with Satellite click 10 LX0W

Hi all

I recently acquired a Satellite phone click on 10 LX0W Toshiba.
The card says it's compatible with micro SD with UHS - I (maximum size: 128 GB)
According to the SD Association, the Mode Bus UHS - I is compatible with the classes of speed UHS 1 and 3 (http://www.sdcard.org/consumers/speed/)
However, the card, I bought (Kingston 64 GB, micro SD XC I, UHS speed class 3) does not work properly in this laptop but it works perfectly in other devices.
The card is recognized by the Satellite click 10 but reading or writing is extremely slow and often give error messages. I can't even format it using this laptop.
I think that there is something wrong with the Toshiba laptop, but can you give me your opinion please?

Thank you!
Kind regards

Same thing here

Toshiba click 10 with 10 windows, micro SD card 64 GB Kingston Class10 (UHS-1) does not work. Card is detected allright - can be seen in the Storage Manager, but cannot format it. If I format in some other device, Toshiba click 10 cannot use he - he can't write will destroy ntfs/exFAT FS on the map. The event viewer is full of SD card related errors.

Any suggestion here, please?

Pilot of 2006 (on windows 10) but cannot find anywhere ever.

Tags: Toshiba

Similar Questions

  • Port replicator does not work with Satellite P100-160 & Vista

    I just bought a Toshiba duplicator (part number: PX1173U-1PRP) but it does not work with the o/s Vista pre-installed on my P100-160. Can someone tell me where to find the Vista drivers for this device?

    It seems that the standard driver is not compatible with Vista and so you will need a new from the Toshiba page.
    You must remove the old driver and then install the new version.

    Good luck

  • Intel WiDi does not work with Satellite L850 - 1 L 1

    Google translator

    object I have a computer toshiba laptop satellite L850 - 1 L 1 and a television always toshiba model 50L7335D

    I can not interfacing with intel widi, what should I do?

    Thank you all

    The Satellite L850 - 1 L 1 was preinstalled and released with Windows 8
    You always use this system of Windows 8, or that you have upgraded to Windows 8.1?

    I m application because Intel WiDi is NOT supported under Windows 8.1 on Toshiba laptops and you will not be able to use the Intel WiDi with Win 8.1

    Here are the details that I found on the page of Toshiba:
    [Important notice for users of Wireless Display (WiDi) | http://aps2.toshiba-tro.de/kb0/TSB3903IF0000R01.htm]

  • Boot CD does not work with Satellite 5105-S501. What should I do?

    I have big problems with my 5105-S501

    The computer is totally screwed upward, with a little help from some virus evil. Well well, anyway; I thought it would be a good time to format the HD and reinstall the operating system.

    He liked the manual says, put the cd in recovery and applications started. When I choose install, I get the message "bad work". Even thought it was the cd that I got with the computer!

    Tried to format the hard drive manually in the comand prompt, did not work. The hard drive has been used and the computer could not force it out of use.

    Put a XP pro cd in the drive and tried to install that one. I have to choose to delete the current partition to format the HD, then I got the message "system unable to perform the operation requested on the selected partition. This partition contains files of temporary facility that is required to perform the instalation.

    Tried Fdisk, did not work. Same problem as above; the hard drive is in use, so forth and so!

    So guys, I really need help. What happened, and what can I do?

    Concerning

    / Peter Sweden

    Hi Peter,.

    I found something that may be interesting for you:

    When you run the recovery cd you get the error message 'bad machine '.

    The CD of Builder/Restore Configuration looks for a specific string of the DMI
    who identifies the model of the computer you are using and compare it
    information on the CD. If these two do not match error
    'machine wrongly' occurs. Your authorized Service provider can Toshiba
    Difficulty an incorrect bios corrupted or empty using a special diagnosis
    tool to rewrite the DMI string.

    If you are certain that you have the correct Configuration generator.
    CD recovery for your computer, then go to your most loved
    Toshiba authorised service provider.

    Maybe he can help you.

  • Bluetooth does not work with Satellite L30

    I have a problem with my laptop L30.
    When I connect my Blutooth or USB, it's do not work... Plizzz help.
    is there a solution?

    Plizz write on my mail

    Hello

    Please give more details. What you want to connect? A mobile phone or something else? Installed the last stack of drivers/bluetooth on the toshiba site?

    If it is not already done, check this link download the battery for your machine:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    And I would be grateful for a more detailed description of your problem.

    THX

  • Satellite Pro M40X does not work with battery

    Hello

    I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
    In recent weeks, the laptop does not work with the battery.
    With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
    The laptop works without battery.

    I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

    I'm sure that battery modules were not upset because I used the battery not very often.
    I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

    Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

    I hope you can help me

    gretings

    Hello

    It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

    Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

  • Click right does not work with Firefox, which may be the problem is Firefox or my computer?

    Click right does not work with Firefox, which may be the problem is Firefox or my computer?

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Satellite A300 - built-in Chicony webcam does not work with Win Live Messenger

    Hello

    I just bought a * Satellite A300-1MC * (works on Vista Home Premium) and downloaded Windows Live Mail and Live Messenger.
    The integrated webcam does not work with Live Messenger; and when you select the tool, Audi + Vieo Setup in Messenger I get thye following message: "we are unable to launch the Audi video installation.
    The webcam works fine with the Camera Assistant Software.

    I tried: 1) killing the AC software and from Messenger. (2) dowanloading one driver webcam Toshiba Web site; (3) update of Windows Vista
    None of the above works.
    Any suggestion received with joy...
    Thomas

    You can try to install the CAM such as ManyCams software - http://www.manycam.com/
    Basically, the program to access your webcam video and redistribute it as a video device ManyCam.

    Richard S.

  • 128 - GB MicroSD card does not work with the new Clip +.

    My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

    Treats quick closing:

    The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

    A 64 GB card format works even without any problem.

    I tried to update the media in MTP and MSC mode; the problem is the same in both.

    There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

    Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

    HM.  Looks like to run CHKDSK /F on the map the problem resolved!

  • Why ctrl + right click does not work with babylon dictionary windows 7

    Why ctrl + right click does not work with babylon 8 dictionary. I use a 64-bit windows 7.

    Hello

     
     
    1. facing this problem only with application of Babylon?
    2. it worked earlier?
     
    If you encounter this problem only with Babylon, I suggest you to post your request in the forum of the community of Babylon to better support on this issue.
    http://support.Babylon.com/
  • Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

    Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

    What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

    Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

    Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  • WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

    My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
    How can I fix?

    There is wifi on other computers, but not on this laptop.

    Hello

    You always win 8?
    Microsoft has already published the Win 8.1 System.
    It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

    The 8.1 update win is free and you can download the Microsoft Store update files.
    Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

    I guess that after updating the WLan would work properly.

  • Re: Satellite L300D-13s - WiFi does not work with Vista

    I have a L300D-13s that came with Visa Home Premium on it.

    His work very well outside the wireless that refuses to work.
    I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

    The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
    I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

    If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
    Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

    Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
    If the problem obviously lies with Vista and/or the drivers.

    If someone has solved this.

    And no - don't tell me to go out and buy a router "Vista compatible".
    If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

    Hello

    > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
    I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
    In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

    I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

    Maybe you should try that too.

  • Paved touchscreen and button right does not work on Satellite L300 with Vista

    My right button does not work.
    By clicking on the icon on the desktop, the drop down menu does not open and when you work in some programs (Indesign).
    In addition, sometimes the touchpad does not work.

    Reset is useful for a little bit.
    I have install the driver of Synatpics 11.2.4.0.
    Is there something else I can do besides sending it to be repaired.

    I just got this laptop 3 weeks ago and I hate Vista.

    Hello

    I put t think this could be a hardware problem.
    First of all, you should try to update the driver for the touchpad.

    First remove the touchpad driver in the system.
    Then, visit the page of European driver of Toshiba and download the latest touchpad driver and install it.

    PS: If you use an external mouse and that you have installed the mouse drivers/tools then this could also affect the functionality of the touchpad.

    Please also check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38792

    Welcome them

  • Satellite A300 - 1 2 does not work with 3 GB or 4 GB of memory

    Does not work with 3 GB or 4 GB of memory, only 2 GB!
    And if I plug a memory in bank1 2 GB module (bank0 is empty) - it's doesn't work too!

    He arrived with 3 laptops. (Sorry, my English is not good :))

    Have you thought about a fact that the phone doesn't support 3 GB or 4 GB of RAM?
    Isn't it?
    Maybe you should check the manual of the first user that is preinstalled on your laptop.

    I think you would find information very important.

    Equipped laptops Intel Mobile GL960 chipset is supported by the maximum memory capacity of 2 GB.
    As I m not wrong not your laptop was equipped with chipset Intel Mobile GL960 the case must therefore be clear now. or not?

    Also is important to know that you will need to use always first bank/slot memory (bank0) If you use a DEAD memory module!

    Good bye

    I think that you can assign 10 points ;)

Maybe you are looking for

  • The battery does not work well. iOS 9.2.1

    Hello After upgrading my air2 iPad to iOS 9.2.1.  I have no problem with the battery not well like before and in the use of battery battery settings and still maintain the same and does not calculate correctly as in the screenshot ideas how solve thi

  • Build error: Add image and delete if possible.vi

    Hello I use LabVIEW 9.0 with the request of the manufacturer, and when I try to build my application I get this error: An error occurred during the recording of the following file: C:\Program NIUninstaller Instruments\LabVIEW 2009\vi.lib\printing\Rep

  • Clock is waste of time

    waste time

  • Internal error 2738

    "Internal error 2738". This is the error message I have on several occasions when I try to install a program. I get the same error in Windows XP Professional edition also. Please give me a solution for this problem.

  • Sound of HP laptop Pavilion dv6 does not work after installing SP2

    After the installation of windows vista server Pack 2-32-bit, the sound did not work