Microsoft corporation programs stopped working and Windows is slow

Similar Questions

• Windows Vista - all programs 'stopped working' and nothing does not open. McAfee is also not working and help and support center does not even

  On my windows vista computer, whenever I turn on my computer and log on, none of my programs work. An error message appears saying that the program has stopped working and windows will try to find a solution to the problem.  The problem is that the help and support center opens either. None of my internet programs to be open, and the same error message for all. We have tried to turn off DEP, and that did not help. My computer is connected to the internet (2wire) but is not able to run due to the problems with my computer. I scanned my computer with windows defender, and we found no problem. Help, please

  Hi Anna1298,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: Try the SFC (System File Checker) scan on the computer.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• Windows Vista - all programs 'stopped working' and nothing does not open. McAfee is also not working and the help and support center/internet does not open even

  On my windows vista computer, whenever I turn on my computer and log on, none of my programs work. An error message appears saying that the program has stopped working and windows will try to find a solution to the problem.  The problem is that the help and support center opens either. None of my internet programs to be open, and the same error message for all. We have tried to turn off DEP, and that did not help. My computer is connected to the internet (2wire) but is not able to run due to the problems with my computer. I scanned my computer with windows defender, and we found no problem. Help, please

  Download the McAfee tool to remove it. Use it in safe mode.

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Reboot and install MSE.

• Skype has stopped working and windows is looking for a solution.

  original title: problem with Skype

  I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

  Hello
  
  It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: Matte final has stopped working and Windows is trying to find a solution

  Original title: Aunsoft final Mate software v 1.7.1 will not run on W7 machine

  I tried to run Aunsoft final Mate software v 1.7.1 on my W7 machine (Windows 7), but it always stops running until it actually launches.  I tried to install my Norton Security full suite uninstalled to ensure that any anti-spyware not wasn't in the way, and it still does not launch (after uninstalling Norton, I uninstalled final Mate and only reinstalled as well).  I keep getting the error message Final Mate has stopped working and Windows is trying to find a solution, which is does not work.

  Aunsoft crossed all their available technical means, but they could not understand whatever it is no more.  They have not said it's works fine on their machines of W7.

  I also tried to intall a product different from Aunsoft MTS Converter, just to see if that would go.  As with Final Mate, it seems to install fine, but also hang up when start and never actually starts.

  Anyone else have problems or suggestions on how to turn ugly Mate on W7 final enforcement?

  This is an old post. Still, I thought I would share my understanding of the problem. I've also faced this runtime error. This happened when the video files have been loaded from an external hard drive last sessions. When the session has been closed, these files were still listed in the source. It seems, when I started final Mate, it looks for the files and then shows the runtime error. When I connected this drive, this problem has been resolved. Therefore, the solution seems to be to ensure that the files are deleted from the source list before leaving the program.

  Hope this helps someone who knows the same problem now and google up to this discussion.

• My audio device has stop working and Windows installs... any suggestions?

  I am currently in Mode safe! Windows starts to load but stops and displays a blue screen with a message full screen but didn't stay there long enough that I read.  In Safe Mode, I found that my audio does not work and Windows could not fix all that is the problem. I need help... where can I go from here?

  A BSOD is in 99% of cases related driver.

  I would start by download and install PC/laptop audio and video W7 drivers specific to the support page of the manufacturer.
  If that does not cure the problem, do the same for the other drivers W7 - chipset, LAN, etc.
  See you soon,.
  Jerry

• COM Surrogate has stopped working problem has caused the program to stop working and windows will close the program

  Impossible to uninstall anything without this message to come. solution is to download the micorsoft updates that are important and I did, and the message always appears

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  Read the info above relating to the resolution of this problem.

  See you soon.

  Mick Murphy - Microsoft partner

• My microsoft money program stop working on my new laptop with Windows 8

  Everything works very well for months and all of a sudden one day he told me that he stop working. No reason to explain why or how come. All answers there?

  Ask http://social.microsoft.com/Forums/en-US/home?forum=money and say what version of Money that you are using and what region you are in.  Read the second post in the forum before posting.

• Programs STOP working and I still get a little black box when I try to sign on AOL.

  I get a message from program work stopped and my program of architecture autodesk revit stops working, other programs also stop working. I spoke about security autodesk macafee, aol and told me that it's a system problem. I have the vista disc, but I have so much information on my computer I have to have. I am also in school and do a lot of work online. I would like to see if this problem can be solved wothout uninstalling and reinstalling windows vista and if not, I would like to know how to back up all the information on my computer. I have a 2 tetrabite mybook external hard drive that I use for storage. I'm in the middle of the finale of this semester include drawings, powerpoint and tests. Please answer as soon as possible. This is my second request for assistance in three days.

  Hello

  I suggest you perform a clean boot in order to check whether a third-party program or service is the cause of the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  You can check these links for more information on how to backup your files in Vista:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update has stopped working and Windows has stopped the unit, he reported problems (code 43)

  Original title: Windows Update stopped working Vista Home Basic.

  HP laptop 550 Vista home basic 32-bit.  Windows Update stopped working, also adapter display Windows stopped the device says it has reported problems (code 43). I uninstalled / reinstalled the drivers, but not make any difference. Thanks for any help.

  Hello

  Question: Windows Update has stopped working

  1. do you get an error message when you try to update?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below.

  The problems with the installation of updates (Windows Vista)

  Question: display Error Code 43 adapter has stopped the unit

  Run the Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows (Fixit)

  Hope this information helps.

• THE "Windows Explorer has stopped working" and "Windows host process (Rundll32) has stopped working" messages, can't do ANYTHING!

  I looked for answers to this problem, and while some deal with similar aspects, none were completely relevant. Step by step, is what happened:

  I downloaded Haali Matroska Splitter since the first result in Google, open the zipper and it ran, if I even got that far. Since that time I have been see two posts above, constantly. I turned the computer on and it persists as soon as it started. I can't access 'msconfig', or other programs that could help because apparently everything works through Windows Explorer. I'm currently looking 29 Admail without loading boxes "restart Windows" on the laptop in question, while writing this to another. Please help, as I am a complete no-hoper to a compliacted question. I would be grateful you're not assuming that I know anything about technique and describing all the solutions in a progressive manner. Thanks a lot people.

  I used a system restore and everything seems OK. Wish I had known that earlier would have saved a lot of headaches.

• Computer will not recognise TomTom and does not connect. A message appears MFC stopped working and Windows had to close.

  I am trying to use TomTom Home to download updates and the computer will simply not see connected TomTom

  This is the work 'around' to download the TomTom HOME software on 64-bit Windows-based operating systems.

  It is VERY IMPORTANT a person steps in the EXACT order shown here, otherwise the program will not work correctly.

  1 = make sure that all the TomTom applications / programs have been removed from the computer and that you restart the computer, the programs have been removed.

  2nd = after the computer has restarted, disable any programs and applications.

  3rd = download / SAVE (do NOT EXECUTE) the TomTom Home Application right on your desktop.

  4th = right click on the TomTom Home Application on your desktop and select "Run as Administrator". This will launch the program and start the installation process.

  5th = when the box shows where your program will be saved on your computer, change the URL to:
  c:\Progra~2\tomtomhome

  (Make sure you misspell the URL exactly as it appears here)

  Then continue the application / process of installation as you normally would.

• Infinite loop of "Windows Explorer has stopped working" and "Windows Explorer restarts" made my phone useless

  I started to get an infinite loop of these two errors on my laptop, as soon as the desktop and start menu appear, which means that I can't do anything on my laptop. He began to arrive shortly after downloading an update for Adobe AIR (updated automatically via Tweetdeck) and an error appeared when saying the installation was damaged and I should reinstall/repair it.

  The problem is that this error loop start instantly as soon as the main office and start bar appears, so I can't do anything, let alone try to uninstall it or try to go online and find a program that would help. I tried to boot up the laptop in each of the three versions of Safe Mode, and errors appeared again each time. I also managed to find my Vista backup drive came with my laptop when I bought and performed a startup repair, but he did find something wrong. Then, I thought I might as well try a diagnosis of memory, but that no longer works. I also tried several different system restore points, but the question begins always at the same time, a lot of time.

  The only thing I can think to do is a clean install of Vista via my backup disk, but stupid me didn't save a workload I need to keep. Oh, and if you're wondering how I write this because my laptop is now effectively useless, I'm borrowing an old of my father.

  Don't know if this is important either, but it's a Dell XPS M1530 Vista Home Premium 32 bit and I had it for about two and a half years with only a handful of problems. I probably would say that this has never happened before, either.

  Hi William,.

  the file C:\Program Files\Flip Video\FlipShare\IPPMp4Splitter.ax causes the crash:
  

  Image path: C:\Program Files\Flip Video\FlipShare\IPPMp4Splitter.ax
  Image name: IPPMp4Splitter.ax
  Timestamp: Wed Sep 28 19:56:02 2009

  MSVCR80. memcpy + 0x5a [F:\dd\vctools\crt_bld\SELF_X86\crt\src\intel\memcpy.asm @ 188]
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  IPPMp4Splitter + 0x3b84
  ntdll! RtlpAllocateHeap + 0xe2f
  ntdll! ZwMapViewOfSection + 0xc
  0x340d51c
  IPPMp4Splitter + 0xffa8

  Remove or update the Flip Video program.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• IE works and windows stops without solution

  comes every time my daughter tries to connect in her webkinz account IE stops working and windows stops without solution. It's happens everytime now, while we have just used google chrome. However with chrome it gets disconnected when she feeds her pets or moving things in the dock. I don't know what the problem Ive tried everything I know (which is not that much) I hope to find an answer because she wants a new computer now. Please keep this MOM some money and a huge headache. Thanx

  The problem with IE can be caused by an incompatible add-on.

  Can you try the following and see if it helps one?

  IE > tools > Internet Options > advanced > uncheck the box in front of "Enable third party browser extensions" > OK then restart IE.

  If this does help not you can re - enable third-party browser extensions.

  If this does not help, you'd have to track down the third party browser extension causing the problem.

  Also, when Windows stops are you a blue screen?

  The following folder exists? :

  C:\Windows\Minidump

• Constant message "program stopped working."

  Try to run a training CD, to guarded first get the message "program stopped working" and now he repeats to me start stopped working.  In both cases, I can't access the program.  Help, please.  Thank you

  Hello

  One question is whether it is Compatible with Windows 7.

  One option is to right-click on the setup.exe or install.exe, > and then select run as administrator to install and run it.

  And this can also help you:

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  See you soon.