Microsoft Explorer has stopped working
I have Vista premium 64 bit which worked well for 8 months. Now, I'm getting Microsoft Explorer has stopped working suite by Microsoft Explorer restarts. In this case problably 10 to 15 times a day when I try to perform a task that requires exploring. In addition, IE explore has the same problem (I was using IE7 32 bit until he leaves then I installed IE8 - worked for 3 days of work, then he started too fault, I tried the 32-bit versions and 64-bit - same problem). Firefox works fine! I tried to do a restore, but crashes with a blue screen of death each time. I have a Dell 430 quad-processor with 8 GB of ram. Any suggestions that I have not already tried another that reformat and reinstall the OS?
Hello
IE and Explorer are closely related, so things that affect one affect both.
Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
role in this issue. And even the TCP/IP stack might need to be refreshed.
What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).
If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.
Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.
Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.php
Startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html
Also get Malwarebytes - free - use as scanner only.
--------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
--------------------
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
--------------------------------
Maybe need of these:
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.
Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Help! My computer Dell laptop keeps telling me that Windows Explorer has stopped working. After that another pop up immediately comes up saying Microsoft explore restarts. It does not give me enough time to get what in the start menu, I was able to start the virus scan twice but it does not end. When I run it in safe mode, it continues to be. Any ideas? I was able to access the control panel through the Task Manager, but it doesn't seem to be any abnormal process running.
Hi Roar4life88
1. for how long have you been faced with this problem?
2. did you of recent changes on the computer?Method 1:
You can perform a scan SFC and check. To Perform a Scan SFC -
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833Method 2:
Also I suggest you to check if you are facing the same question in the user account new or different administrator account. You can create a new user account on your computer, and then check.Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
-
HP20: Windows Explorer has stopped working, followed by windows explore restarts
Hello everyone, a few days my computer began to behave strangely. When you try to download some pictures using Chrome, windows Explorer has crashed, and a pop-up will appear showing the message: "Windows Explorer has stopped working". A few seconds after that, the entire desktop up-to-date and another window poped by displaying "Windows Explorer restarts... ».
The cycle of two windows appearing repeatedly. I restarted the computer as soon as it shows the office, the same thing happens again, to infinity.
I was able to restart the computer by using the security mode, it works just fine. I've disabled most of the software at startup, except 360 total security anti virus. It has not solved the problem.
Does anyone have a solution for this? Thank you very much for any help!
Matheus
Hi old_geekster, I tried what you said and it did not work. However, I then found the original source of microsoft where you got this info from, and they mention here on a corrupted video driver as a source as possible. That was the problem in my case: radeon tried to update earlier this week, but I was in a hurry and it did not properly. I tried again and it worked now!
Thnaks for your help, even if not exactly what I needed, it solved my problem!
-
Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code. This has happened for days. I am running windows 7.
I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.
We will cover all the possibilities.
1. download each of the tools for deletion below, save it to your desktop:
Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)
IMPORTANT! => Activate the Windows Firewall immediately after the restart.
IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!
4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
5. Repeat step #4 for another removal tool.
Tips:
-Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.
-Online start the problem in Mode safe computer, if necessary, proceed as above.
-Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm-Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Windows Explorer has stopped working - error status Code - c000009c
Original title: Windows Explorer has stopped working - debilitating Error Message
On my main account, I keep getting an error message that pops up every 4 to 8 seconds and freeze the rest of the screen. It comes from Microsoft Windows and the error message indicates that Windows Explorer has stopped working the details include:
Signature of the problem
Problem event name - InPageError
Error Status Code - c000009c
Media Type-00000003 vulnerabilities
OS version - 6.0.60012.1.0.256.6
ID of locale - 1033
Additional information 1-40 d 4
Information additional 2-4062ad41ec8067256aa4c5e2b56d3c79
I can't access the internet and my computer through my secondary account - I of course tried closing down and restart a dozen times, I have ensured that all the Windows updates are installed and I am at a loss for what I could do. Any help would be so appreciated, because I'm working on my computer and couldn't since a few days - get desperate!
Thank you very much!
Thank you
Hi Jessicaco,
Please see the thread with a similar problem and fix possible:
I hope this helps!
-
Vista - "Windows Explorer has stopped working".
Original title: mixture mscrumb
Can someone help me please you wih fixing the message "Windows Explorer has stopped working" under Vista? I can't enter the normal mode for Windows.
Hello
You may try start-up repair (see following message) and you can also troubleshoot help
Safe mode (repeatedly press F8 as you start).What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyMore troubleshooting:
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DrirveView - set the VIEW to hide
Microsoft drivers - update those without drain in their names. (Also update BIOS and)drivers chipset on the site of the constructor/the system motherboard.)
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3 I hope this helps.Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
"Windows Explorer has stopped working / windows restart" happens in a loop.
System is not yet able to run as administrator / cmd.exe file. "Run" is not recognized as a builtin or external operable program or batch file. What should do?
Hello
This error most often occurs due to some third party application conflicts. Have you tried the steps in the sticky provided above?
Explorer Windows stopped working
-
Please how do l open my folders that l find dificult to find the required information.
Hi Sabrina Awuah Aning
(1) since when are you facing this problem?
(2) when exactly it happens?
Looks like the thread you are referring has been moved or merged.
Method 1: Run the fixit available in the links below and check if that makes a difference
Diagnose and repair Windows files and folders problems automatically
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.Method 2: You can follow the steps described in the article below, which deals with a similar question
Error message when you log on to Windows Vista: "Windows Explorer has stopped working".
http://support.Microsoft.com/kb/937093
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
Errors NT Service stopped working and was closed"and Windows Explorer has stopped working"
Original title: NT service
"NT service stopped working and was closed" appears on desktop screen after signing in. In addition, "Windows Explorer has stopped working" appears when trying to access to the "view network status and tasks" or "set up file sharing" in the control panel. However, I am able to access Internet Explorer without problem. What is the problem?
Hello
1. you hear that you receive the error at startup after you have signed in to the user account?
2 have you made any changes to the computer before the show?
NT Service stopped working and was closed because:
Method 1: Try to start the Services.msc services and see if that helps, manually.
(a) click Start, type services.msc and press enter
(b) search for the following services
(c) Net.Tcp listner adapter
(d) the Net.Tcp port sharing
(e) make sure the status of services started and startup type is automatic.
(f) click on apply and Ok.
Method 2: SFC scanner.
Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833
Explorer Windows has stopped working the issue:
See the following article:
Important notes:
· You can exclude scan SFC in the following article:
· When you have finished diagnostic using the clean boot, follow step 7 article to start on normal startup.
· The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
· Before Inplace upgrade, be sure to back up data.
Error: Windows Explorer has stopped working http://support.microsoft.com/kb/2694911
-
Is not allowing me to access my computer, don't constantly message restarts message windows. Process is underway, need help. I loged as a guest on the computer problem not if badly - however, it does not go to all the pages and begins to have a similar message to say windows cannot open this page, even if it often is in the page and it stops.
a response would be email to me - thanks
Hello
1 have had any changes made to the computer before the show?
Please follow the steps in the link.
Important: before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911
Reference link:
Explorer Windows stopped working
-
SE Buffer Overflow prevented notification and "Windows Explorer has stopped working"
Dell Inspiron 1501 with Windows Vista Home Edition SP2 using base. Receive notification of the 'Buffer Overflow prevented' McAfee antivirus program caused by progran Wndows Explorer.exe. also get notification "Windows Explorer has stopped working", then after a while "Windows Explorer restarted". I don't know why this is happening. Help, please.
Hello
See the following article:
Note: Before installing, be sure to cook the data.
Error: Windows Explorer has stopped working:
http://support.Microsoft.com/kb/2694911
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Windows Vista - Windows Explorer has stopped working :(
From the start of the base, I then selected each program one by one and then restarted the computer. I thought that if I disabled it "Windows Audio Endpoint Builder" and "Windows Audio", the problem stops... anyone... anyone? Flight Simulator is not the same without her lol...
Moderator Forum Keith has a few suggestions along this line to
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps. Good luck.
- -
When I go to one of the three users on a Vista Home system, I get the message "process host windows (Rundll32) has stopped working" & "Windows Explorer has stopped working".
I ran SFC and chkdsk for this user, (took 2 hours) and it is not fixed. Help, please?
I ended seting up a new user for my wife, the user who is messed up. and I overcame everyting execpt his address book/contacts. She wants me to fix the first. Help, please.
SpamLessSN
Hello
Are what contacts/address address you referring to?
Perform the following steps in order to correct the damaged user account
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileHope this information helps. -
Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?
original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original title: "windows Explorer does not work.
I try to access my documents and I get a pop saying "Windows Explorer has stopped working", he spends next to her saying "windowse Explorer restarts" the box with all the options of my document is then stopped. I tried accessin while market and stop the internet, and it makes no difference.
What should I do
Hello
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
Camileo B10, what happens if the USB is connected to the PC and the camera is on shot?
Manual says that to charge battery camera must be set to off. The question is how the camera behaves if usb is plugged (and power) and the camera is turned on? It works normally, but battery is not looking or camera will take it s usb power and batte
-
Satellite A200-1TW - HD-DVD player does not play a HD-DVD
My Satellite A200-1TW does play not any HD-DVD. Normal DVD and CD is playing.I've updated the BIOS with the latest version of the software known to V2.10 - WIN and also put to update the display with the latest ATI 8.432 driver driver.He plays always
-
I have a HP Officejet Pro 8600. When scanning I frequently neet to rotate a multi-page document. How to turn the entire document at once rather than on a single page at a time. Sam Bear1
-
How to re-install Windows Installer under Vista?
I don't have the Vista OS CD as the laptop came with the operating system installed. I have the product key, but MS is not a download online for Vista,
-
What it means when he says that I have exceeded my limit of page! -I didn't know I had a
I try to send a document for countersignature, but I'm not allowed and keep has been warned, I exceeded my limit of page. What can I do to work around this problem, I wasn't aware, I had a limit of page - thank you