Microsoft isatap adapter, get the message "this device cannot start code 10".

Similar Questions

• We get an error "this device cannot start" Code 10 on Windows 7.

  Original title: USB not recognized verified work storage device

  I have a 8 GB USB Flash drive that has, until recently, worked perfectly on several OSes including Windows 7 and 8. Recently, the player does not seem to want to work on one of my installations of Windows 7 on a PC (HP EliteBook 8470p).

  I tried to reinstall the drivers for it on my machine specific windows 7 that does not work on. Device Manager gives me "this device cannot start. (Code 10) "even after reinstalling the drivers and reboot several times. I use also some virtual machines in Windows 7 and 8 on the same PC, and when connecting virtually the USB key to the virtual machine to Windows 7, I can't detect it. When you connect the device to the virtual machine from Windows 8, I can access the files and even format, so the USB ports on my computer are all functional.

  To summarize, the device works in Windows 7 and 8 separate facilities of this computer, but does not work on 7 on my TI, if the main or virtualized operating system. The VM of Windows 8 on this computer can recognize the device.

  Thanks for the answer, except that I discovered the problem. I checked upward in the disk management window, and I saw that the reader, for some reason, was not assigned a letter. After you manually assign the drive letter, all data on the disc is now available. Thanks anyway.

• "this device cannot start (code 10)", which means code 10?

  I was alarmed because I could stop my computer because of a 'message' came onto my computer and I was able to get off. So he would'nt stop. I was installing some new drivers with my Scanner Driver Uniblue, when this happened and so I Google'd up Uniblue to see if I could know what I could do about it, and I found there an investigation on the system cleaners and uniblue was last on their list of 5 questioned, and there were a few bad reports on this subject. I also had on my system, cure of Parelogic pilot, who had slipped completely under my guard through an email from the author of 'Math better explained', an e-book that I had downloaded some time ago and I have now seems to be a fake email because when I looked towards the top of Parelogic there was so many complainants and we even said that they do absolutely nothing positive and in fact that their objective is to implant the computers people and they must be reported to the FBI.

  In any case I finally understood how to disable the offending message. But now I'm worried about 10 network cards that have yellow triangles with! "s with the message"this device cannot start (Code 10) ". It's probably just because I have no network connection, but I can't be sure until I have find this code 10 means,.

  Thank you for your trouble,

  calicoghotmail

  Hello calico.ghotmail,

  My apologies for the delay in the response to this topic.

  Code 10 means that a device could not start.

  If there is no network connection on this computer, then this might be a possible reason for this error.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Installation of driver with PXI-8360 error "this device cannot start - Code 10"

  While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

  Thank you

  Manu

  Sounds great Manu,

  I also followed on that for you, then you should be getting approval sometimes today.

  I hope for the best

• Microstoft ISATAP adapt: this device cannot start (code 10)

  I've had no internet access for a few weeks - a day that worked and then the next day no wi - fi or Ethernet connection. Someone on the MS Community suggested to install driver updates, but the laptop in question has no access to the internet and has been updated automatically anyway. Today, I tried to reinstall the drivers on the adapters wi - fi and broadband from the phone itself, which seemed successful. But when I got to the ISATAP Protocol would not do the same thing and it comes up with the error message in the title of this post.

  I read a few posts, which suggest to uninstall the adapter and then put it back, but as my laptop has no way to connect to internet, I don't see how it will work in my case. I don't seem to have the Win 7 CD either, unfortunately. So, where do I get a new adapter or update the driver, or whatever I need to do?

  Thank you

  IRB

  Hi Snarli,

  Thanks for posting the query on Microsoft Community.

  I understand that you are unable to connect to the internet and that he wants to know if you will be able to re - install ISATAP Adapter without an internet connection or not.

  I suggest you to run the troubleshooter and check if it helps.

  Hardware devices do not work or are not detected in Windows:

  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  You will be able to install base drivers to restart the system after installation.

  If you have any other computer where you can download the driver and the copy to an external hard drive or USB key, you can go ahead and uninstall the driver and restart the computer. Is it does not automatically get installed, and then try to install it by using a USB key.

  You can consult the advice given by Vinod N replied on 26 April 2011.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/this-device-cannot-start-code-10-Microsoft-ISATAP/dc43be6f-466F-E011-8dfc-68b599b31bf5

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• in the Device Manager window.there is a brand of (!). Microsoft tun miniport adaptor.this device cannot start. (code 10)

  in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez

  Hello

  Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  I'm your pain ptapp!

  Through my research for an answer that solves this problem, I have found that not even Apple knows how to solve this problem of password to iCloud.

  All 4 of my devices constantly ask my password because of some problems with xyz account.

  Then I enter the password only to be told that iCloud cannot check my password.

  Then after several repetitions of this I get locked and have to go to the site apple id to change my password.

  I didn't spend $6 000 on these beautiful devices so I could spend countless hours dealing with support (with no positive result) and find themselves just beyond myself in frustration. I have a Mac Pro, 2 iPads, 2 iPhones and an iPod touch. All are behaving this way, no matter what it is I'm doing at the time.

  Apple needs to fix this problem, if they have any idea how to.

• Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum s

  Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?

  I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.

  Hi John,.

  Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.

  I wonder if you have checked your system requirements before you download Acrobat.

  I would also ask to share with you the screenshot of the error message with us.

  You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  If you were installing DC, check out the following link to download.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)

  Concerning

  Sukrit diallo

• This device cannot start code 10 and could not open selected port

  I load the driver for my track past tracking key Pro and I get the message that this device cannot start code 10. I show no upper or lower filters so the troubleshooting on found here does not work.  If I go to program followed past and then look for the device I get the message could not open selected port.

  I tried all USB ports and they work with other devices. I have a Toshiba satellite running windows 7.

  The company was no help.  Can someone help me please?

  Thank you

  Liz

  Your best bet is to contact the developer again, we have no knowledge of their products.

• Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

  Hello

  I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

  Askey WLL3070-D4 (MOW)
  Atheros AR5BRB-43

  I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

  Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

  I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

  I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

  Does anyone have a location for a pilot, etc.?

  Thank you

  Hello

  I always use this page for WLan driver update:
  http://APS.toshiba-tro.de/WLAN/

  It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

  Ciao

• In a work previously Win 7 Pro Shuttle system, we are now "this device cannot start (code 10)" with high defination driver.

  The system with the problem is a shuttle G2 7600 with Windows Home Premium 32 Bit, AMD Athlon II X 2 ' dual core 2.9 HZ.  The sound is integrated 5.1 audio channels.  This works installed sense July 14, 2011.   We now have no audio.  After the properties of the device, see the "this device cannot start (code 10)" someone can help me with this problem?

  Hi Jack,

  You did changes to the computer before the show?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you try the steps from the following link:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/en-us

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Canon HG20: this device cannot start (code 10)

  Hi all

  My Canon HG20 camcorder works well on Windows XP. But it's not on Windows 7 64 bit.

  Here's what happenning:

  -The camera is recognized when I connect (via USB) to the PC photo transfer mode.

  -It is not recognized when I connect (via USB) transfer of film mode.

  -In "Devices and printers", the camcorder is shown, but with a yellow exclamation mark on it, notify a problem.

  -The properties panel (right click-> properties) shows "device status: this device cannot start (Code 10)".

  -(Right click-> troubleshooting) troubleshooting completed but fails: "USB mass storage has a driver problem.

  Any suggestions would be greatly appreciated.

  Thanks in advance.

  Hello

  You can try to launch its convenience store and check out what he has to say.

  Here's how you can do:
  1. click the Start button, and then select devices and printers.
  2. right click on the mouse and select troubleshooting.

  I also suggest to install windows update and check if that helps. Also update the drivers chipset, for this you may need to contact the manufacturer of your computer.
  See the article below to install windows update.

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  http://www.USA.Canon.com/OPD/controller?Act=OPDSupportDropDownAct
  http://www.USA.Canon.com/OPD/controller?Act=OPDContactUsAct

  Hope this information is useful.

  Umesh P - Microsoft Support

• Headset (headphones and microphone) USB - this device cannot start - Code 10

  Hello

  I just bought a USB headset today and tried to use it.  I had a driver error message when first plugged in.  The help system has proved to be unnecessary.

  After doing some research on this forum, I checked the Device Manager and found that the indicatses of properties of USB audio device "this device cannot start. (Code 10) ".  Forum entries suggests that a lot of people have similar problems.

  Mine is a new installation of 64-bit Windows 7 on a new hard drive, but on older hardware of the PC - Asus A8N SLI Premium.  Someone at - it had suggestions as to the resolution of the problem.  Note that a normal headset worked fine yesterday (but I broke it) plugged into the jack Sockets, but I wanted to use a USB headset to avoid having to continue to go to the back of the computer to replace my system 2.1 speakers.

  Thank you

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you follow the steps in the link below and check if it can help solve your problem.

  http://support.Microsoft.com/kb/943104

  Please reply back and let us know the status of the issue.

  Azam - Microsoft technical support.

• This device cannot start (Code 10) - referring to the CD-ROM/DVD-ROM internal drive.

  Since yesterday I get the message above regarding my internal CD on my Acer laptop drive.

  The PC is barely over a year old & the Cd-Rom works fine up until now.

  I recently moved from Windows Vista Home Premium to Windows 7 Professional (about 2 weeks ago) and the CD-Rom drive has been used successfully to restore all my backup files that W7 is a new installation (not an upgrade).

  I removed the CD-Rom drive (a device slimtype DVD ADS8A2S Philips - Lite-on according to its label) and have re-connected it, but it still does not work.

  Windows seems to see the device when I say add a device, but when he tries automatically configer it I get the message "there is a problem with the driver for Slimtype DVD A DS8A2S ATA Device. "Reinstall the driver may resolve this problem" and gives me the ability to "Apply patch" or "jump the fix. When I choose "Apply patch" I finally get the message "device driver software not properly installed" - Please consult the manufacturer of your device to help... »

  Someone at - it ideas why all of a sudden I get a problem with my CD, I can not restore to any previous backups that I need a CD-Rom drive to do? In the meantime, I'll do a search in the site of compatibility of Windows to see if I can find a match for my camera and what he said about it.

  PS. the only thing different (new) I did just before I lost my CD-Rom has been thast I had linked to a conversion cassette tape via a USB device that my wife wanted some songs from an old tape of copy on CD. Tape copied OK and was transferred to the software iTunes on the PC, but when I said that I wanted to "Burn" the selection in College, I noticed that my CD-Rom (player 'E') show is no longer on my PC configuration, only on disks hard "C" and "D". If this has an impact on my problem, I don't know - it could just have been a co-fact?

  The following MS KB article may help:

  http://support.Microsoft.com/kb/982116

  Try the auto fix (Mats - Run.dvd.exe) and if that doesn't work try following the steps for Windows Vista, which should also work for Windows 7.

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.