Microsoft Jet database cannot be found, do not forget to file

I bought two pal of calendar time. One for my windows 7 that works very well. Second for my windows XP that gives me an error message which can not well the MS Jet database remember file. I was told that my file systems must be corupted. so I reinstalled the Version upgrade CP 2.1 and 5.1 SP 3 and always get the same answer. I look online and realize that it seems to be a timer problem. I'm not a programmer.

Check out these:

Error message when you use Access: 'the Microsoft Jet database engine cannot find the input table or query "" ' or 'the record '' source indicated on this form or report does not exist.
http://support.Microsoft.com/kb/287696

Database engine Microsoft jet could not find object 'xyz.dbf '...
http://msmvps.com/blogs/access/archive/2007/09/10/Microsoft-Jet-database-engine-could-not-find-object-XYZ-DBF.aspx

Tags: Windows

Similar Questions

  • Error '80004005', an Exception occurred in the Microsoft JET Database Engine

    Hello

    I use Microsoft Jet 4.0 OLE DB Provider for storage in the database file Microsoft 2000 (.mdb file) for the past two months with no problems, now I get the error '80004005', of Exception occurred in the Microsoft JET Database Engine: could not open the database. It may not be a database that your application recognizes, or the file may be corrupt. I study some forums but could not get a definitive answer as to why this might be happening.

    Please, help me to understand this error so that I can avoid losing data in the future.

    Thank you

    Guilhem

    It is impossible to say when the problem occurred, but as Dennis said that Jet is not a robust database. It falls particularly in situations where is is called to manage large sets of data or be accessible from multiple users at the same time.

    In terms of alternatives, they are many if you want to go this route.

    Mike...

  • Error message: the 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local computer.

    Hello

    I've successfully installed the NCLEX - RN 4000 on Microsoft Windows 7 Home Premium edition. However, I get the error message "the"Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer"whenever I try to open the program.» The package says that the software is compatible with versions of Microsoft Windows Vista and XP. I tried to open the program using program compatibility issues resolution which did not work. I also do a right-click on the icon and choose Properties/compatibility and then selected the most recent Microsoft Windows OS program is compatible with and apply the settings. To my dismay, it was also a no go. I did some research and reading that Microsoft Windows 7 Home Premium 64-bit is not compatible with the programs .msi. So, I checked and found out that the file ends by .msi.

    With all that said, these are the questions that I find myself with:

    What can I do to fix this so that I can use my 4000 NCLEX-RN program?

    Why Microsoft Windows 7 is not backward compatible?

    Any help with this problem would be greatly appreciated!

    Thank you very much!

    UPDATED: Wednesday, April 21, 2010

    If someone else has the same problem when you try to run the NCLEX-RN 4000 program on the Windows 7 operating system, you will need to contact Wolters Kluwer Health (the manufacturer of the NCLEX-RN 4000 Review program). The customer service number is 1-800-638-3030. Once you reach a customer service representative explain why you call and they will send you by e-mail an update that will allow the NCLEX-RN 4000 to run on the Windows 7 operating system. Please do not hesitate to ask if you have any questions! And thanks to all who have responded to this topic! I enjoyed all your comments!

  • Unspecified error in Microsoft JET Database Engine code = 0 Type = 1

    Had the following message from coldfusion by trying to create a connection with an access unicode driver

    Unspecified error in Microsoft JET Database Engine code = 0 Type = 1

    I wrote a previous post here, but it does not gives me an answer how to solve this problem.


    I installed coldfusion mx 7



    ----------------
    Well, that's kinda funny. I have installed the latest patches from microsoft. My server was already aware, but I tried anyway. After the reboot, the problem is resolved.

    Had the following message from coldfusion by trying to create a connection with an access unicode driver

    Unspecified error in Microsoft JET Database Engine code = 0 Type = 1

    I wrote a previous post here, but it does not gives me an answer how to solve this problem.

    I installed coldfusion mx 7

    ----------------
    Well, that's kinda funny. I have installed the latest patches from microsoft. My server was already aware, but I tried anyway. After the reboot, the problem is resolved.

  • Format XP Microsoft JET Database Engine error 80004005 unrecognized database would be...-

    XP Microsoft JET Database Engine error '80004005' Unrecognized database format would be... -Is a message I get. Don't know how to fix it?

    Hello

    Welcome to the community forums of Microsoft and thanks for posting the question. He would be grateful if you could answer a few questions to refine the question.

    1. Once you get this error?

    2. are you aware of changes to the computer before the show?

    3. you use ActiveX Data Objects (ADO) or ODBC to connect to a Microsoft Access database?

    4. This error occurs when you run a specific program or out of order?

    5 are logged as administrator?

    "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
     
    See this link for more information on:
     
    http://support.Microsoft.com/kb/555375

    Provide more information about the issue so that we can help you.

  • I get the error code that microsoft.jet.oledb.4.0 provider is not registered on the local computer

    I get the error code that microsoft.jet.oledb.4.0 provider is not registered on the local computer

    I have the 64 bit vista edition and can't find a way to get this program to run. Can someone help me please. I need this program for school

    http://social.msdn.Microsoft.com/forums/en/SQLDataAccess/thread/ded16d08-b98c-4130-a6af-d3df4061494c

    Read the information on the link above; and the link to the answer.

    See you soon. Mick Murphy - Microsoft partner

  • Error when you try to run 4000 NCLEX-RN: The Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer.

    ' Microsoft.Jet OLEDB.4.0 error

    I'm running the NCLEX - RN 4000 and get the error message:

    The 'Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer.

    Someone at - it a link that will allow me to view the program NCLEX - RN 4000 that I installed on my laptop?

    Take a look on...

    http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/17efa13d-2d16-4F1D-9EA1-302b7a054ecf

    --
    Gina Whipp
    Microsoft MVP (access)

    Please post all responses on the forum where everyone can enjoy.

  • Microsoft Paint suddenly cannot be found/used

    Here's the deal; This pc is about a year and a half, things worked very well on that. About 1 month ago I went to use Paint in the drop-down list in the Windows Photo Gallery (he was always there with reliability, a single click and it would always appear as it is supposed to) and for some reason any, that he was no longer in the selection of the programs that it usually is. I clicked on start and typed in the search box in the paint and also Microsoft Paint and nothing is found...? I clicked on help and typed in the painting and found instructions for her as well as a link to bring up the program, which did, but there was also a small white box opened in it, I guess from my latest project, which will not be clear. I was able to use it a few times to provide assistance, but something is always fair and I can not understand how to fix it. I went to use the paint today still through the help option (the white box empty is still in there but it will not erase) and I tried to put a picture to change; He asks me if I want to save the empty white box and I click on no, then try to open a new project and I get "a sharing violation occurred when accessing...". "(the folder where it is located). I'm the only person using this pc, I was put in as an administrator since I've had and have not changed or all profiles with access limited and never had a problem like this before...? I have Windows Vista Basic. Can anyone help? Thank you in advance...

    Hello

    Thanks for choosing Windows Vista community.

    1 have you tried system restore?

    I suggest you perform a system restore, as it was working fine before.

    Follow the instructions in the following article, do a system restore.

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    To restore the operating system to an earlier point in time, follow these steps:

    1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    2. in the System Restore dialog box, click on choose another restore point and then click Next.

    3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

    4. click on finish.

    http://support.Microsoft.com/kb/936212

    2. run SFC/scannow to replace any corrupted or missing system files.

    This command will launch immediately the System File Checker to scan all protected files and verify their integrity, replace all the files with which it detects a problem.

    1. click on start

    2. click on all programs

    3. click on accessories, then right-click on the command prompt.

    4. Select the Security tab and choose "Run as Administrator"

    5. click on command prompt

    Type SFC/scannow

    The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    Let us know how it works.

    Here is the link to download Paint

    http://download.Microsoft.com/download/winntwks40/Paint/1/NT4/en-US/Paintnt.exe

    Kind regards
    Technical support of Microsoft-yama.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • «Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer in Windows 7»

    Hi, I looked at the issue and it is based on the fact that there is no 64-bit version of Jet.
    My problem is however not to work with VB or IIS or anything else that uses this particular DB.

    I am trying to run NCLEX-RN4000 on the new machine, and it is a standalone application (there are a .exe and the bunch of htmls in folders). I guess that the program was created using VB or something similar that used this OLEDB. I wonder just isn't absolutely no hope for this market? Or is it possible to change something in the registry? or specify a start via a shortcut setting?

    I know that my computer has the msjet40.dll, it's just in a directory that the program does not have to look at, I guess.
    Any info would be helpful.

    Hi Eugene G.

    Welcome to the Microsoft Answers site.

    In my view, the question you have posted will be well suited in the TechNet forums.

    Please visit the link below and post your request there.

    http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/threads

    Hope you find the resolution as soon as possible.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think

  • 'Microsoft.jet.OLEDB.4.0' provider is not registered on the local computer.

    This message. What can I do? I'm runiing on Vista Home Edition.

    Hi meaniegnolou,

    Thank you for visiting the Microsoft answers Forum.

    Try the troubleshooting steps in thisthread. If you need more help, post a new thread in this forum.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to export my yahoo address book in outlook express 6? Microsoft opens with cannot open a... .csv file

    I need to export my Yahoo address book to Outlook Express 6. When I try, a window appears saying I want to find or save this file? I click on search and then my page redirects to Microsoft says I have a csv file and no way to open it.

    Hi sntuld,
     
    -What, exactly, is a transcript of the error message that you receive?
     
    You must save the .csv (contacts file) of the Yahoo address book file, and then import the file into Outlook Express.
     
    If you are looking for the recorded .csv file, use the search function and check if you can find the file.
     
    Here are some links that you might find useful:
  • Error in database engine Microsoft JET '80004005' operation must use an update query.  / fax_remove/index.asp, line 115

    everything began to receive the following error message

    Microsoft JET Database Engine error '80004005'

    Operation must use an update query.

    /fax_remove/index.asp line 115


    for the following Web page

    Remove.canchair.com


    no coding changes have been achieved

    Use your host control panel to check the permissions of the remote folder that contains the mdb and the mdb itself. Contact your host if you are unsure how to proceed.

  • Error: database name not found and no default driver specified, installing a program and pay using the Microsoft access database.

    Original title: name not found and no data source driver by default specified

    Hi all, I tried to google search and try all methods that talk about the world. but I can't always solve this error for 1 week.
    I have install the program pays to computer A, and it works fine.
    But I install the same program to computer B, it gives me this error
    data source name not found and no driver specified default.
    the computer is windows 7 32 bit, and I did add the system DSN.
    It is using microsoft access database.

    does anyone have the solution for this?

    Thank you

    Hello

    The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

    Office 2010 - IT Pro General Discussions TechNet Forums

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

    Hi team,

    I am trying to connect to the Oracle 9i database using VB code below:

    strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
    Connect = New ADODB. Connection
    Connect.Open (strConnection)

    The last line throws me below error:

    [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

    The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

    The servers are Windows server 2007-32 bit.

    When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

    Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

    Considering that the UAT server has entered below:

    Microsoft ODBC for Oracle-

    The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

    Kind regards

    Tamil

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • The requested flight file corrupt error flight simulator program could not start or cannot be found.

    When I go to start the flight sim (Fs9) program I get this error Message requested flight file corrupted or cannot be found.

    OT: File corrupted

    Hello

    I suggest you try the steps from the following link:

    Game hangs or quits unexpectedly
    http://support.Microsoft.com/kb/303032

    Note: Make sure that you reset the computer in normal mode once you perform the clean boot.

    If the problem persists, then I suggest you to the post office.
    http://www.Microsoft.com/games/flightsimulatorx/
    http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx
    http://support.Microsoft.com/GP/games-for-Windows

Maybe you are looking for