Microsoft Kernel System Audio Device fails

Similar Questions

• Microsoft applicant system unknown device error

  Hello

  I installed the 64-bit Windows 7, Device Manager shows missing driver unknown system compatible ACPI Microsoft

  I installed 3d keep too, but it still exists.
  model-Pavillion you p016

  Hello:

  You need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141423-1&cc=us&DLC=en&LC=en&OS=4063&productOid=7132619&sw_lang=

• No audio device, have a yellow question mark to Microsoft Kernel Acoustic Echo Canceller & Microsoft Kernel WaveAudio Mixer (HP Pavilion dv6103) portable

  Hi all

  I use a HP Pavilion dv6103nr Entertainment Notebook (Window XP).  Audio device was working before, but a few months ago the audio started does not (no sound cannot be played).

  When I go into control panel--> sound and devices Audio---> it is said that no. AUDIO DEVICE

  Then I go to control panel to control---> system---> hardware---> device---> sound, video management and game controllers---> I found a yellow question mark beside: MICROSOFT KERNEL annuleur of ACOUSTIC ECHO and another question mark yellow right next to: MICROSOFT KERNEL WAVE AUDIO MIXER.

  I then right click on each of these drivers and tried to update the two drivers (I've tried insert the recovery disk (it is the only drive that I got when I bought this laptop) and also I tried to install the software automatically, but these two options did not work.)

  Please tell what should I do now?  Already, I went to the HP site and looked for these two materials for a update but had no luck...

  PLEASE HELP ME OUT HERE!    I'M REALLY No.$ to BUY a NEW computer LAPTOP, BUT I NEED to USE AUDIO if BADLY... pls help = *) appreciate very much for all your help here!

  To troubleshoot sound problems

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01763067&cc=us&DLC=en&LC=en&product=3289548&tmp_track_link=ot_search

  AutoScan for lack of device drivers.

  http://h20614.www2.HP.com/ediags/GMD/welcome.aspx?LC=en&cc=us&product=3382292

  (2) drivers audio

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3289548#n198

  Good luck.

• error code 39 cannot load the device driver, cannot load microsoft kernel drm adio Descrambler

  I have no sound, no audio output device installed is the message on the speaker icon.
  Open the Device Manager, I get the error code as indicated in the title. My audio is Realtek ALC888 HD audio

  Dear anyone, I had the same problem. One day, my sound card / audio just stopped. X red on the sound icon. My CD/DVD worked fine but no sound. I uninstalled the sound card, updated drivers... everything I could find... nothing worked. I run only Vista 32 bit with a Realtek AC 97 integrated sound. Looked on the forums and read and I tried for weeks hoping to not have to reformat. Finally, I got in the registry and lucky. Here's what I did: Device Manager: uninstalled all the sound stuff. I kept getting this: Microsoft Kernel DRM Audio Descramber Microsoft Streaming Clock Proxy Microsoft responsible for quality Proxy Microsoft Service Proxy Microsoft Tee/receiver-to-Sink Converter Realteck AC 97 I uninstalled all that sort of thing. Then to regedit and see below Regedit navigate to: HKeyLocalMachine\System\CurrentControlSet\Control\Class {4D36E96C-E325-11CE-BFC1-08002BE10318} ON RITE PANE... I deleted: for FILTERS LOW Dword value (Mine was something that read like LVUSB or some such), I restarted and did not leave Windows Installer automatically... don't leave... it will give you everything _ mentioned above. I reinstalled my sound of a pack of Realtek for Vista. Lo and behold... sound is back. Vista still hate the pilot but did before cuz Vista sucks... but it works like any other so... screw it! I am happy. Hope this works for you. chatilingus

• New device failed, HD Audio after installing updates to Win 8.1

  Hello.

  I have installed recent updates from Toshiba, exactly:

  * 06/02/14 display nVidia Windows 8.1-64 Bit 9.18.13.2660 World Wide disk *.
  * 06/02/14 display driver Intel Windows 8.1 - 64 Bit 10.18.10.3308 World Wide *.
  * 06/05/14 gas station Toshiba Windows 8.1 - 64 Bit 2.6.8 world wide *.
  * 06/02/14 Toshiba Audio Enhancement Toshiba Windows 8.1 - 64 Bit 2.0.15.4 world wide *.
  * 06/02/14-key Toshiba utility function Toshiba Windows 8.1 - 64 Bit 1.1.0001.03 world *.

  and one of them has forced the creation of a new audio device, fails with 'STATUS_DEVICE_POWER_FAILURE '.

  I tried to remove it (and uninstall related drivers to) the device, but it reappears if I do the new hardware detection.

  What is?
  The drivers are Microsoft, 6.3.9600.16384

  Thank you very much
  Marco

  Hi Marco

  As I can see from another thread, you Satellite L50-A-1CU. According to the specifications of the laptop this laptop was offered with pre-installed 64 bit ML WIN8.1.
  Preinstalled OS contains all the necessary drivers, tools and utilities, so I want to ask you if there is a problem with the feature.

  Please don't get me wrong, but I use laptop 4 years but always with the original substance of preinstalled and everything works perfectly so I don't see the reason to change anything if the machine works well and pre-installed OS is stable.

  One last thing. Do not use the Microsoft drivers. Some of them are offered as optional Windows updates. Don change anything. Use the original Toshiba drivers only.

• Satellite Pro M70-220: Microsoft Kernel DLS driver reinstall

  I'm having a problem with the "Microsoft kernel DLS synthesizer" (on my laptop Satellite Pro M70-220).
  that very well, I would appreciate some help to solve.

  My questions are in * "BOLD" type * at the bottom of this post.

  In the device under the "Sound, video controller & games" Manager type of device, I found a yellow exclamation point
  mark against "The Microsoft kernel DLS synthesizer".

  When I right click on the entry for device 'Microsoft Kernel DLS Syntheizer' and select 'Properties', the
  more info is given under the general tab:

  Microsoft kernel DLS synthesizer
  Device type: sound, video controller & game
  Location: Location 0
  Device status: Windows cannot load the driverfor of this hardware device. The driver may be corrupted or
  missing (Code 39)
  Click Troubleshoot to start the troubleshooter for this device.

  Before clicking on the resolution of the problems, I checked the info on the "Driver" tab, which is:

  Microsoft kernel DLS synthesizer
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows component Publisher

  When I click on the button "Driver Details" tab driver, the information given is:

  Microsoft kernel DLS synthesizer

  Driver files:
  C:\Windows\System32\drivers\D.music.sys
  C:\Windows\System32\drivers\lvusbsta.sys
  C:\Windows\System32\drivers\Tvs.sys

  Provider: Microsoft Corp.
  File version: 5.1.2600.5512(xpsp.080413-2018)
  Digital signer: Microsoft Windows Publisher

  On the 'Détails' tab in the properties box, the given info is:

  Microsoft kernel DLS synthesizer
  Device ID of Instance
  \DMUSIC SW\ {8C07DD50-7A8D-11D2-8F8C-00C04FBF8FEF}

  * Troubleshooting: *.
  When I click on the "store" on the general tab, a page "Toshiba Help & Support" is displayed.
  who gives the instructions to uninstall and reinstall the device. Uninstallation instructions are simple:

  Go to Device Manager > right to uninstall click Device > click Surdesinstaller > in the "withdrawal of the device confirm.
  Dialog box, click OK.

  My concern is with the "relocation of the device" instructions, which are:

  Close all programs > start the Add Hardware Wizard > click Next and Windows Search Plug &
  Play devices.
  If no device Plug & Play are found, a list of devices appears > click on "Add a new hardware device" > click Next > click
  "manually install the hardware that I select in a list" > click Next > in the "Common material Type" list
  Click the appropriate device category > click Next > in the manufacturers list, click the manufacturer of your
  device > in the "Models" list, click the name of the model OR click "have a disk, if you have an update or
  the manufacturer provided to install for your device driver > click Next and follow the instructions in the wizard
  to complete the installation.

  * Issues: *.

  * 1. What is "Microsoft DLS synthesizer" and what is its role? *

  * 2. Is "Microsoft DLS synthesizer" a device of internal device, as opposed to a 'Plug and Play '? *

  * 3. With respect to relocation instructions: *.
  * - what category of device "Microsoft DLS synthesizer" would be listed under? *
  * - in the list of "models", what the "model name" would be for the "synthesizer DLS of Microsoft? *

  * - for 'Disc' alternative option, where can I get/download a update or provided by the manufacturer *.
  * driver for "Microsoft DLS Synthesizer" of? *

  * - one disc 'a' Wizard allow you to select the folder on the hard disk that contains the *.
  * Downloaded (s)? *

  Note: I'm leaving the principle that the driver is corrupted so I'll have to download and install
  the uncorrupted driver.

  * Please indicate if there are any other installation information that I'm aware of.*

  Thank you very much for any assistance anyone who can offer.

  AlanCB

  Hello

  I've never heard of the Microsoft kernel DLS synthesizer and that's why I studied a bit.

  I found this MS developer site:
  http://msdn.Microsoft.com/en-us/library/aa940369.aspx

  It is said:
  The component of the Microsoft kernel DLS synthesizer provides the port of DMusic, content class miniport driver in the dmusic.sys file

  It seems that most of the problems with this kernel occur due to lack of SP2.
  If you have installed Windows XP you need to update the operating system to the State.
  All service packages must be installed!

• Audio Device notfound & PCI on Aspire One device driver problem

  I have 2 Aspire One netbooks, both worked fine a major accident. I installed a new xp with SP3 and all the Acers site download drivers for my netbook by serial number. After that everything seems to work properly, I did an image and cloned the other netbook.

  Now when you open a youtube video element ends and I put in place an error on device configuration

  When I open my control panel and look at the sounds it says "no Audio device is found.

  I have a PCI device in Device Manager only configuration and have pinned it down for "PCI VEN_8086 & DEV_27D8 & SUBSYS_015B1025 & REV_02\3 & B1BFB68 & 0 & D8.

  I think that the problem of audio device or pci question are related and causing youtube video error.

  I checked the bios versions tonight and the computer has the latest version of the bios.

  Any advice? Thank you... My wife uses her netbook all the time that's why in the need to make it work again. My netbook is sitting most of the time until I travel. I have a 15 "aspire I used to use.

  Okay, better control the HardwareIDs, seems to be the microsoft high definition audio device.

  Fix Microsoft is necessary above all to the HD, device drivers are installed, but the patch will not pass on windows XP SP2 computers.

  See link: http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=888111&kbln=en-us

  Open Device Manager by typing the command devmgmt.msc. Select sound, video and game controllers.

  If no driver installed uninstall one by one.

  Open the registry editor and navigate to the following location

  HKLM\SYSTEM\CurrentControlSet\Control\Windows\

  Change the CSDVersion value to 200. Restart the computer

  Download the Microsoft patch kb888111xpsp2.exe

  See link: http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=888111&kbln=en-us

  After updating the patch install the audio drivers for the system.

  Restart the computer.

  Open the Registry Editor again.

  Locate the HKLM\SYSTEM\CurrentControlSet\Control\Windows path and replace the old CSDVersion value is in a 300 words.

  Realtek audio drivers:

  http://global-download.Acer.com/GDFiles/driver/audio/Audio_Realtek_5.10.0.6010_XPx86_A.zip?acerid=63...

• Problem with the driver for Audio device high definition

  I have a Windows 7, 64-bit, Studio 1558. When I started the computer about a week ago, I was a message that the Service Notification of system events cannot connect. I checked the event log and found error 7022, where it says that the audio device was suspended. After some research and experimentation, I made the error go away by turning off the (Microsoft) High Definition Audio Device Driver, Version 6.1.7601.17514. However, now I have no sound. I tried updating the audio driver for my computer (IDT 92HD73C1 Audio, v.6.10.0.6267, A18), but this doesn't seem to work, and now I returned to a previous restore point to go back to square one. I'm not sure what caused the problem. Some said similar positions that he was leaving headphones plugged to power off the computer. others said that the use of cmd-> "netsh winsock reset" would solve the problem (of least temporarily). Any of these seemed to help me. Basically all I want to do is to install a sound device driver that works. I hope someone can point me in the right direction to do so. Thanks for any help provided.

  DellRaiser

  I tried updating the audio driver for my computer (IDT 92HD73C1 Audio, v.6.10.0.6267, A18), but this doesn't seem to work, and now I returned to a previous restore point to go back to square one.

  I can't say that if you were not able to install the driver IDT or if you installed but got the same error message.

  If the first case, try to download one of the files directly from the ftp server of DellIDT.

  If the latter, if you get the same symptoms with the IDT pilot and the native Windows (high definition Audio Device) driver so it is difficult to see the drivers as the cause of the problem, because it is rare that two drivers have the same failure at the same time. Here's how to switch between the 2 pilots:

  1. open Device Manager (type devmgmt.msc in the start search box and press ENTER) and right click on IDT High Definition Audio Codec.
  2 Select this option to "Update driver software".
  3. click on "Browse my computer for driver software".
  4. click on "Let Me pick from a list of drivers on my computer".
  5. put the "Show compatible hardware" check box if not already checked.
  6. in the list of devices, click on 'High Definition Audio'.
  7. click on "next".
  8. in the update driver warning box, click 'Yes' (the driver).
  9 restart the portable computer if you are prompted. If not invited, so no need to restart.

  To reverse the process, change the names in steps 1 and 6.

• This device cannot start (Code 10) - high definition Audio Device AND opening. VHD files.

  Just upgraded from Vista professional to Home Premium 7.  (Which means that I couldn't have the installationl UPDATE and had to go for CUSTOM).  In hindsight, not a good idea!
  1. no sound from speakers.  I tried updated driver.  Problem is with the Microsoft high definition Audio Device.  Using T9404 of advent, Intel R, HD 400 G, 1 G of RAM.  Speakers are not muted and sound card worked fine with Vista.
  2 had a full backup in Vista immediately before moving to 7; But - guess what - can't open. VHD files for the look, or use it!
  Any help would be greatly appreciated
  Concerning
  AL

  His problem solved.  For the benefit of others in the same boat, that's what I did.
  After trying everything I could think of, I had another look at the system clean.
  Computer >
  Drive C (double click) >
  Request >
  Driver >
  Sound >
  Select Configuration, right-click, choose Run as administrator >
  Wizard starts, select 'Reinstall using your computer settings' >
  Reset.
  Hey its nice and presto!  (Which almost took off my head, because I had forgotten that the speakers were entirely upwards).
  Shows Device Manager now that one mistake, on the network controller - anyone has any information about it, what it does, what application it is associated with etc.
  Concerning
  AL

• Audio device removed during the restoration of the system

  original title: restore accidentally deleted programs?

  How to restore accidentally deleted programs? Somehow, there is no sound, as he says we no longer have an audio device... Thank you!

  Hello

  1. What is the exact error message you get?

  2. Why do exactly you want to know how to restore accidentally deleted programs?

  3 did you do changes on the computer before the show?

  4. What is brand and model computer?

  5. which version of the operating system are you using?

  I suggest you to visit:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  You can get the uninstalled programs by using the system restore option.

  See the site:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• you see a blank page because no audio device attached to the system

  When I open the realtek hd, he says you see a blank page because no audio device attached to the system. to activate the gui, connect an audio device to the system. It has been like this since that I restart my computer and I had my helmet on for any input but it's always the same here standing, someone at - it advice I can do? Thanks for any response.

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• 2 UPDATES constantly FAIL to INSTALL: a security update for Microsoft Works 9 (KB2431831) update of security for Microsoft Office System 2007 (KB2288931)

  2 UPDATES have consistently failed to install since 12/16/10: update of security for Microsoft Works 9 (KB2431831) and update of security for Microsoft Office System 2007 (KB2288931). I tried to REINSTALL... and CONTINUED on for more than a week now with no result. I don't get the error messages or codes, so I'm not sure what to do! They are considered IMPORTANT so I guess that I need these updates and I TRIED to RESTART after update with NO RESULTS as well. The 2 latest updates only "UPDATED successfully", before the long chain UPDATES failed, which began on 12/16/2010 (as previously mentioned) were: update for Internet Explorer for Windows Vista (KB2467659) and Security Update for Windows Vista (KB2305420) someone knows what do to update failed? Any help would be most appreciated. Thank you. {By the way... I use my computer for use at home or school.} Thank you.

  This has been answered above in my first post. I didn't know that I reposted on the same site. Thanks :)

• 2 updates FAIL to install: Security Update for Microsoft Works9 (KB2431831) and update of security for Microsoft Office System 2007 (KB2288931)

  2 UPDATES are constantly down since 12/16/10 Update: update of security for Microsoft Works 9 (KB2431831) and update of security for Microsoft Office System 2007 (KB2288931). I tried to REINSTALL... and CONTINUED on for more than a week now with no result. I don't get the error messages or codes, so I'm not sure what to do! They are considered IMPORTANT so I guess that I need these updates and I TRIED to REBOOT after updates with NO RESULTS as well. (I am running Windows Version 6.0 with Service Pack 2) The 2 latest updates only "UPDATED successfully", before the long chain UPDATES failed, which began on 12/16/2010 (as previously mentioned) were: update for Internet Explorer for Windows Vista (KB2467659) and Security Update for Windows Vista (KB2305420) someone knows what do to update failed? Any help would be most appreciated. Thank you. {By the way... I use my computer for use at home or school.} Thank you.

  This might be relevant: http://support.microsoft.com/kb/2258121 TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• any ideas? Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581). That's what I get away

  Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581).

  
  

  any ideas?

  Suggestion: Try to do a repair of Office 2007 installation, then try the updates (after a reboot).

  How to install and repair 2007 Office features
  http://support.Microsoft.com/kb/924611 TaurArian [MVP] 2005-2010 - Update Services