Microsoft L2TP VPN to ASA 5520

Similar Questions

• Is supported PPTP vpn cisco ASA 5520 firewall?

  Hi all

  I'm Md.kamruzzaman. My compnay buy a firewall of cisco asa 5520 and I want to configure PPTP vpn on asa 5520 firewall. Is it possible to configure the PPTP vpn to asa firewall. If possible can you please tell me what is the procedure to configure the PPTP vpn.

  Best regards

  MD.kamruzzaman

  Sorry, but the Cisco ASA firewall does not support PPTP VPN termination.

  You may terminate IPSec and SSL VPN but not of type PPTP.

  If you are new to the ASA, how best to configure the supported VPN types is via the VPN Wizard integrated into the application of management of ASSISTANT Deputy Ministers.

• IPSec VPN to asa 5520

  Hello

  First I must admit that I am not very versed in Cisco equipment or in general IPSEC connections so my apologies if I'm doing something really good obviously stupid, but I checked through any kind of things that I could find on the internet on the configuration of IPSEC VPN.

  The setup I have is an asa 5520 (o/s 8.2) firewall which, for now, is connected to a temporary connection beautiful style home broadband for testing purposes. The netopia router is configured to allow ipsec passthrough and redirect 62515 UDP, TCP 10000, 4500 UDP, UDP 500 ports in the asa 5520.

  I'm trying to connein out of a laptop with disabled windows firewall and vpn cisco 5.0.02.0090 client version.

  I ran several attempts through the ipsec configuration wizard options. most of the time that nothing comes in the newspaper to show that a connection was attempted, but there is a way I can set up product options the following on the firewall log:

  4. Sep 24 2010 | 13: 54:29 | 713903 | Group = VPNtest9, IP = 86.44.x.x, error: cannot delete PeerTblEntry

  5: Sep 24 2010 | 13: 54:29 | 713902 | Group = VPNtest9, IP = 86.44.x.x, drop table homologous counterpart does not, no match!

  6. Sep 24 2010 | 13: 54:21 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF

  3: Sep 24 2010 | 13: 54:21 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.

  6. Sep 24 2010 | 13: 54:16 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF

  3: Sep 24 2010 | 13: 54:16 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.

  6. Sep 24 2010 | 13: 54:11 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF

  3: Sep 24 2010 | 13: 54:11 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  6. Sep 24 2010 | 13: 54:06 | 302015 | 86.44.x.x | 51905 | 192.168.0.27 | 500 | Built UDP inbound connection 7487 for Internet:86.44.x.x/51905 (86.44.x.x/51905) at identity:192.168.0.27/500 (192.168.0.27/500)

  and this, in the journal of customer:

  Cisco Systems VPN Client Version 5.0.02.0090

  Copyright (C) 1998-2007 Cisco Systems, Inc.. All rights reserved.

  Customer type: Windows, Windows NT

  Running: 5.1.2600 Service Pack 3

  24 13:54:08.250 24/09/10 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  25 13:54:08.265 24/09/10 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  26 13:54:08.265 24/09/10 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "213.94.x.x".

  27 13:54:08.437 24/09/10 Sev = Info/6 IKE/0x6300003B

  Attempts to establish a connection with 213.94.x.x.

  28 13:54:08.437 24/09/10 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 213.94.x.x

  29 13:54:08.484 24/09/10 Sev = Info/4 IPSEC / 0 x 63700008

  IPSec driver started successfully

  30 13:54:08.484 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  31 13:54:13.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021

  Retransmit the last package!

  32 13:54:13.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x

  33 13:54:18.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021

  Retransmit the last package!

  34 13:54:18.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x

  35 13:54:23.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021

  Retransmit the last package!

  36 13:54:23.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x

  37 13:54:28.484 24/09/10 Sev = Info/4 IKE / 0 x 63000017

  Marking of IKE SA delete (I_Cookie = 36C50ACCE984B0B0 R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING

  38 13:54:28.984 24/09/10 Sev = Info/4 IKE/0x6300004B

  IKE negotiation to throw HIS (I_Cookie = 36C50ACCE984B0B0 R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING

  39 13:54:28.984 24/09/10 Sev = Info/4 CM / 0 x 63100014

  Could not establish the Phase 1 SA with the server '213.94.x.x' due to the 'DEL_REASON_PEER_NOT_RESPONDING '.

  40 13:54:28.984 24/09/10 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  41 13:54:28.984 24/09/10 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  42 13:54:28.984 24/09/10 Sev = Info/4 IKE / 0 x 63000001

  Signal received IKE to complete the VPN connection

  43 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  44 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  45 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  46 13:54:29.187 24/09/10 Sev = Info/4 IPSEC/0x6370000A

  IPSec driver successfully stopped

  I have connectivity full http from the internet to a machine inside the asa 5520 so I think that the static routing and NAT'ing should be ok, but I am pleased to provide you with all the details.

  Can you see what I'm doing wrong?

  Thank you

  Sam

  Pls add the following policy:

  crypto ISAKMP policy 10

  preshared authentication

  the Encryption

  md5 hash

  Group 2

  You can also run debug on the ASA:

  debugging cry isa

  debugging ipsec cry

  and retrieve debug output after trying to connect.

• SSL VPN using ASA 5520 mode cluster - several problems

  I configured 2 ASA 5520 s in the load balancing cluster mode. I connect using anyconnect and I download the customer the first time and everything works well except outlook. I don't know why outlook does not work.

  The second problem is after the anyconnect client is installed on your machine, he remembers that ASA (say ASA2) he first connected and the GUI shows the address IP of ASA2 instead of the virtual IP address of the cluster. I want users always connect using the virtual IP address.

  The third problem I have is there is a default group of SSL VPN and I want all users to use this group. In the initial web page, there is a drop down menu which shows that this group, but I still want to disable this menu drop-down.

  Any suggestions?

  To disable the drop-down menu, you can turn it off with the command

  WebVPN

  no activation of tunnel-group-list

  This will take care of your last issue.

  ***************************

  You can create a profile of the Anyconnect client with the name of the server you want to connect with and that make the ASA that will solve your problem of virtual IP.

  **************************

  Regarding Outlook, do you use specific ports which allows inspection of the ASA. Take a look at the list of inspection on the SAA and perhaps try to disable inspection and see if it works.

  *****************************

• Divide access remote vpn tunnel ASA 5520

  Hello

  I'm setting up a vpn for remote access with split tunnel, but I use an acl extended to match a host and http to destination port, but does not work.

  Scenario of

  Distance access(10.0.0.122/24)--internet---Cisco ASA(inside:192.168.10.1/24)---ip = 192.168.10.6 - C6509 - 10.0.0.254/24---hote = 10.0.0.31/24

  The plot is when I activate the IP service connection or flow ICMP worked. Does anyone have an idea what is the problem? Thank you

  Concerning

  Split tunneling does not take into account the port information you specify in the ACL, he doesn't care the ip address/network you defined.

  If you want to restrict access to ports and IP, you must define your split tunneling with only ip addresses and using a vpn-filter acl in group policy to restrict following the specific ports that you want:

  split_acl ip access list allow

  access-list allowed filter_acl ip eq

  attributes of group-pol

  Split-tunnel-pol tunnelspecified

  value of Split-tunnel-net split_acl

  VPN-filter value filter_acl

  -heather

• VPN Cisco ASA 5520

  Hello, my name is Jeremy Rose, I am a novice...

  I'm trying to set up a VPN in a private network to access a server from outside of our firewall.

  The VPN functions, however, we are unable to contact the server once the VPN is in place.

  I can provide more information, as requested, any ladies or gentlemen reccomendations?

  Thank you

  Jeremy

  Ensure that valuable traffic corresponds to both ends basically.  So if your server is 192.168.1.10 and changed to 10.1.1.10 you must update under the card encryption ACL.

• VPN site to site & outdoor on ASA 5520 VPN client

  Hi, I'm jonathan rivero.

  I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection.

  the executed show.

  ASA1 (config) # sh run

  : Saved

  :

  ASA Version 8.0 (2)

  !

  hostname ASA1

  activate 7esAUjZmKQSFDCZX encrypted password

  names of

  !

  interface Ethernet0/0

  nameif inside

  security-level 100

  address 172.16.3.2 IP 255.255.255.0

  !

  interface Ethernet0/1

  nameif outside

  security-level 0

  IP 200.20.20.1 255.255.255.0

  !

  interface Ethernet0/1.1

  VLAN 1

  nameif outside1

  security-level 0

  no ip address

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  2KFQnbNIdI.2KYOU encrypted passwd

  passive FTP mode

  object-group, net-LAN

  object-network 172.16.0.0 255.255.255.0

  object-network 172.16.1.0 255.255.255.0

  object-network 172.16.2.0 255.255.255.0

  object-network 172.16.3.0 255.255.255.0

  object-group, NET / remote

  object-network 172.16.100.0 255.255.255.0

  object-network 172.16.101.0 255.255.255.0

  object-network 172.16.102.0 255.255.255.0

  object-network 172.16.103.0 255.255.255.0

  object-group network net-poolvpn

  object-network 192.168.11.0 255.255.255.0

  access list outside nat extended permit ip net local group object all

  access-list extended sheep allowed ip local object-group net object-group net / remote

  access-list extended sheep allowed ip local object-group net net poolvpn object-group

  access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group

  pager lines 24

  Within 1500 MTU

  Outside 1500 MTU

  outside1 MTU 1500

  IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0

  no failover

  ICMP unreachable rate-limit 100 burst-size 10

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 access list outside nat

  Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1

  Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1

  Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1

  Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  86400 seconds, duration of life crypto ipsec security association

  Crypto ipsec kilobytes of life security-association 400000

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  card crypto VPNL2L 1 match for sheep

  card crypto VPNL2L 1 set peer 200.30.30.1

  VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 20

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  !

  !

  internal vpngroup1 group policy

  attributes of the strategy of group vpngroup1

  banner value +++ welcome to Cisco Systems 7.0. +++

  value of 192.168.0.1 DNS server 192.168.1.1

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value splittun-vpngroup1

  value by default-ad domain - domain.local

  Split-dns value ad - domain.local

  the address value ippool pools

  username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15

  tunnel-group 200.30.30.1 type ipsec-l2l

  IPSec-attributes tunnel-group 200.30.30.1

  pre-shared-key *.

  type tunnel-group vpngroup1 remote access

  tunnel-group vpngroup1 General-attributes

  ippool address pool

  Group Policy - by default-vpngroup1

  vpngroup1 group of tunnel ipsec-attributes

  pre-shared-key *.

  context of prompt hostname

  Cryptochecksum:00000000000000000000000000000000

  : end

  ASA2 (config) #sh run

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  86400 seconds, duration of life crypto ipsec security association
  Crypto ipsec kilobytes of life security-association 400000
  card crypto VPNL2L 1 match for sheep
  card crypto VPNL2L 1 set peer 200.30.30.1
  VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
  VPNL2L interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 20
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400

  tunnel-group 200.30.30.1 type ipsec-l2l
  IPSec-attributes tunnel-group 200.30.30.1
  pre-shared key cisco

  my topology:

  

  I try with the following links, but did not work

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml

  Best regards...

  "" I thing both the force of the SAA with the new road outside, why is that? ".

  without the road ASA pushes traffic inward, by default.

  In any case, this must have been a learning experience.

  Hopefully, this has been no help.

  Please rate, all the helful post.

  Thank you

  Rizwan Muhammed.

• Microsoft l2tp IPSec VPN site to site ASA on top

  I have a specialized applications casino that requires end-to-end encryption. I'm under the stack of Microsoft IPSec l2tp between my XP machine and my Windows 2003 server on the LAN. Can I use the same type of protocol stack Microsoft l2tp IPSec between my XP machine and the Windows Server 2003 a branch on the SAA to site to site ASA VPN tunnel? The VPN site-to site ASA is a type of key Preshare IPSec VPN tunnelle traffic between our head office and a branch in distance.

  In other words, the ASA site-to-site IPSec VPN will allow Microsoft l2tp through IPSec encrypted traffic? My ACL tunnel would allow full IP access between site. Something like:

  name 192.168.100.0 TexasSubnet

  name 192.168.200.0 RenoSubnet

  IP TexasSubnet 255.255.255.0 RenoSubnet 255.255.255.0 allow Access-list extended nat_zero

  Hello

  Yes, the L2TP can be encapsulated in IPSEC as all other traffic.

  However, make sure that no NAT is performed on each end. L2TP is a default header protection which will see NAT as a falsification of package and reject it.

  See you soon,.

  Daniel

• ASA 5520 - VPN using LDAP access control

  I'm setting up an ASA 5520 for VPN access.  Authorization & authentication using an LDAP server.  I have successfully configured tunnel, and I can access internal resources.  What I want to do now is to limit access to a specific ad group membership.  In the absence of this belonging to a group, a user cannot access the VPN.

  My VPN client software testing is Cisco Systems VPN Client 5.0.05.0290 Version.  The Group authentication is configured in a connection entry that identifies the Group of Tunnel. I think I wrote that correctly.

  The Version of the software on the SAA is 8.3 (1).

  My current challenge is getting the VPN to stop letting each request for access through little matter belonging to a group.  I found the thread below to be significantly useful, but there is obviously something which is not entirely mesh with my situation.

  https://supportforums.Cisco.com/message/3232649#3232649

  Thanking all in advance for everything offered thoughts and advice.

  Configuration (AAA LDAP, group policy and group of tunnel) is below.

  AAA-Server LDAP protocol ldap
  AAA-Server LDAP (inside) host x.x.y.12
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  microsoft server type
  LDAP-attribute-map LDAP_MAP
  AAA-Server LDAP (inside) host x.x.y.10
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  LDAP-attribute-map LDAP_MAP
  AAA-Server LDAP (inside) host x.x.y.11
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  microsoft server type
  LDAP-attribute-map LDAP_MAP

  AAA-Server LDAP (inside) host x.x.y.10
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  LDAP-attribute-map LDAP_MAP
  AAA-Server LDAP (inside) host x.x.y.11
  Server-port 636
  LDAP-base-dn dc = domain, dc = com
  LDAP-scope subtree
  LDAP-naming-attribute sAMAccountName
  LDAP-login-password *.
  LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
  enable LDAP over ssl
  microsoft server type
  LDAP-attribute-map LDAP_MAP
  !
  internal group NOACCESS strategy
  NOACCESS group policy attributes
  VPN - concurrent connections 0
  Protocol-tunnel-VPN IPSec webvpn
  address pools no
  attributes of Group Policy DfltGrpPolicy
  VPN - 10 concurrent connections
  Protocol-tunnel-VPN IPSec webvpn
  enable IPSec-udp
  vpn group policy - pro internal
  vpn - pro group policy attributes
  value x.x.y.17 x.x.y.27 WINS server
  Server DNS value x.x.y.19 x.x.y.29
  VPN - 50 simultaneous connections
  Protocol-tunnel-VPN IPSec svc
  group-lock value vpn - pro
  field default value domain.com
  value of address ip-vpn-pro pools
  WebVPN
  client of dpd-interval SVC no
  dpd-interval SVC 1800 bridge
  !

  attributes global-tunnel-group DefaultRAGroup
  LDAP authentication group-server
  LDAP authorization-server-group
  Group Policy - by default-vpn-pro
  authorization required
  type group tunnel vpn - pro remote access
  attributes global-tunnel-group-vpn - pro
  LDAP authentication group-server
  Group-server-authentication (LDAP outside)
  LDAP authorization-server-group
  Group Policy - by default-vpn-pro
  band-Kingdom
  password-management
  band-band
  authorization required
  type tunnel-group NOACCESSGROUP remote access
  attributes global-tunnel-group NOACCESSGROUP
  LDAP authentication group-server
  NOACCESS by default-group-policy

  Hello

  The configuration of what you are looking for is a feature called DAP (Dynamic Access Policy)

  The following link will explain how to set up the same.

  http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• What VPN work as a PPTP vpn firewall CISCO-ASA-5520.

  Hi all

  Can you please tell me which replace the VPN I can configure PPTP on ASA 5520 firewall. What VPN work as a PPTP vpn firewall CISCO-ASA-5520.

  You can use the wizard VPN of RA with ASDM and confiugre L2TP IPSEC VPN that does not need a VPN Client must be installed.

  Michael

  Please note all useful posts

• Tunnel VPN ASA 5520 (DMZ + INSIDE) destined for OUTSIDE

  I can't find any reference to anywhere else.

  We have an ASA 5520 to our site HQ (inside the network) with several regional subnets on the DMZ interface.

  We need connectivity VPN Site to Site between the INSIDE and a remote control on the OUTSIDE of the site, as well as between the DMZ subnets and even outside the site. The interface from the OUTSIDE of the SAA must be local VPN endpoint for all tunnels.

  I created a S2S VPN between the INSIDE and the OUTSIDE site and it works great.

  When I create a VPN S2S tunnel between a site of DMZ and even outside the site (using the same settings the and remote, but with a cryptomap different because the local subnet (DMZ) is different from the other inside the subnet, the traffic gets the mapping (show crypto isakmp his) to the same cryptomap that was created for the access to the tunnel from the OUTSIDE) , instead of to the new cryptomap, so remote endpoint deletes it, and traffic also causes SPI incorrect of for the remote endpoint, which makes the original INTERIOR outside OF THE VPN tunnel to fall from time to time.

  Is this a bug?

  I also did a local S2S VPN tunnel configuration test of networks as everything INSIDE and the DMZ. With the help of the wizard VPN S2S leads ASA only to create a NAT rule exempted for the subnet on the INSIDE interface. Can I manually create another tax-exempt NAT rule to the side of the DMZ and use this a S2S tunnel to connect sites inside and DMZ to the remote OFF-SITE in a connection profile?

  I'm building a Rube Goldberg?

  Thank you

  George

  Hi George,.

  It seems you have a situation overlapping it, are you sure that subnets inside did not overlap with the networks from the DMZ?  A package tracer could clarify wha that the ASA is actually sending.

  In addition, you can merge the two interfaces on the same card encryption if you wish, just make sure that the NAT is configured correctly.   For example; Source NAT (all, outside) static...

  It may be useful

  -Randy-

• ASA 5520 to Juniper ss505m vpn

  I'm having a problem with the vpn site to site between a asa 5520 and Juniper ss 505 m. The tunnel rises, but we seem unable to pass traffic through the vpn tunnel.  It appears on the remote side makes a connection to the ftp server on the Local Server, but is never prompt identification of connection information.

  April 19, 2016 13:27:13 SQL-B2B-01: % ASA-4-402116: IPSEC: received a package ESP x.x (SPI = 0xD167A5E8, sequence number = 0xD).

  241.90 (user = X.X.241.90) at X.X.167.230.  Inside the package décapsulés does not match policy negotiated in the SA.  The

  package specifies its destination as its Protocol TCP, its source such as X.X.2.68 and X.X.167.233.  SA specifies its loc

  proxy of Al X.X.167.233/255.255.255.255/tcp/5376 and his remote_proxy as X.X.2.68/255.255.255.255/tcp/5376.

  list of remote ip-group of objects allowed extended West Local Group object

  NAT static Local_Pub Local destination (indoor, outdoor) static source Remote

  Crypto ipsec ikev1 transform-set esp-aes-256 Remote esp-sha-hmac

  West-map 95 crypto card is the Remote address
  card crypto West-map 95 set peer X.X.241.90
  map West-map 95 set transform-set Remote ikev1 crypto
  card crypto West-map 95 defined security-association life seconds 28800

  Juniper-

  "Remote-ftp" X.X.167.233 255.255.255.255

  Gateway proposal P1 preshare "[email protected]/ * /" proposal "pre-g2-aes256-sha-28800.

  P2-proposal "no-pfs-esp-aes256-sha-28800" No. - pfs esp aes256 sha-1 second 28800

  ----------------------

  the top of the policy of "Trust" to "Untrust" "X.X.2.68/32" "Remote-ftp' 'ftp' vpn"Remote-vpn"tunnel log

  put on top of the "Untrust" policy to the "Trust" "Remote-ftp' 'X.X.2.68/32' 'ftp' vpn"SonoraQ-vpn"tunnel sign

  I do not know Juniper, but it seems that it is trying to negotiate the use of only 5376/tcp on the tunnel, when it should be negotiated just Protocol "ip".

• How many group Supportepar ASA 5520 vpn for remote access

  Hello

  Howmany vpn group is supported on asa 5520 with configuraion vpn remote access.

  Concerning

  1 if nat-control is disabled and you do not have any other order NAT in your config file, you do not have it. Try to remove the existing "NAT 0" command and "clear xlate."

  2. you must ensure that your network inside know they can go by ASA to access remote vpn client IP. You have any device layer 3 behind the ASA that does the routing. If so, please verify that this is the routing table.

• ASA 5520 8.0 (4) port depending on the ACLs vpn works not

  Hi all

  I have a problem with an ASA (5520 8.0 (4)) for lack of working with a port based acl for remote clients. I have a simple acl from a single line to split traffic, if I allowed the tunnel IP works fine, if I lock it up to TCP 3389 rdp will not work. I don't see anything in the logs and debug output, I did have a problem with a similar configuration (5510 8.0 (4) and I'm at a loss to explain it.)

  Everyone knows about this problem before? I have nat exclusions etc and as I said, the tunnel only works if the acl permits all IP traffic between client and server.

  THX in advance

  Split-tunnel list cannot IP, if you want to restrict which ports are are sent via the tunnel vpn for your clients vpn, you need to use VPN filters under Group Policy:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml

• Using Cisco Client to site VPN on a behind a NAT ASA 5520

  I apologize if this has been asked and we answered in the forums.  I looked, and while I found a large number of entries that were dancing all around this question, I never found nothing which addressed this specific issue.   We currently use an ASA 5520 as the head end of a relatively large customer to site IPSEC VPN (approximately 240 users, not consecutively).   This ASA is currently sitting behind a Checkpoint firewall with a real publicly addressable IP address on its public interface.  All of our customers use the legacy Cisco VPN (not the one anyconnect) client.  We plan to a few controllers F5 link set up between ISPS and firewalls.   For VPN connectivity F5 recommends that we NAT IP address (called a broad IP) to point back to a private IP address on the ASA and F5.  My question is, will this work?   I've always heard say that the head of line needed to have a public IP address on this subject because this is what will be placed in packages for the client to respond to.

  For further information, here's what we have now and what we are invited to attend.

  Current

  ISP - router - firewall-fire - ASA (public IP address as endpoint)

  Proposed

  ISP - router - F5 (public IP address as endpoint using a NAT to ASA) - Firewall - ASA (10.X.X.X as its external interface)

  Proposed alternative

  ISP - router - F5 (public IP address as endpoint using a NAT to ASA) - ASA (10.X.X.X as its external interface)

  All thoughts at this moment would be greatly appreciated.   Thank you!

  Hello

  If there is a static NAT one by one on F5 to the external interface of the ASA, then I don't think they would be any problems.
  Because when the client will attempt to connect to IKE to the translated public IP, F5 will redirect the request to ASA outside interface that is configured for the VPN.

  In addition, to ensure the udp500, 4500 and esp is allowed and then you should be good to go.

  HTH

  Concerning
  Mohit